Magnasonic PP71 User Manual
User Manual
Mini Projector
PP 71
Thank you for your purchase of this Magnasonic product. Please read this
instruction manual carefully before using product to ensure proper use.
Keep this manual in a safe place for future reference.
magnasonic.com/support
CONTENTS
COMPONENTS OF PROJECTOR .................................................................. 3
SPECIFICATION ..................................................................................................4
PROJECTOR COMPATIBILITY.........................................................................4
CHARGING THE PROJECTOR ...................................................................... 5
SET UP .................................................................................................................... 5
POWERING UP AND VIEWING MEDIA ..................................................... 6
ADJUSTING VOLUME ........................................................................................6
ADJUSTING FOCUS ......................................................................................... 6
CHARGING YOUR DEVICE WITH THE PROJECTOR .............................6
IMPORTANT SAFETY INSTRUCTIONS ....................................................... 7
TROUBLESHOOTING ..................................................................................... 10
®
MAGNASONIC
WARRANTY ......................................................................11
WARNING:
PLEASE CHARGE THE PROJECTOR EVERY
3 MONTHS TO MAINTAIN BATTERY LIFE
- 2 -
COMPONENTS OF PROJECTOR
1. 3.5 mm Earphone jack
2. Standard USB port 5V/1A
for charging output
3. HDMI signal input port
4. Reset button
5. Micro USB 5V/2.4A power
input
6. Optical lens
7. Volume up
8. Volume down
9. Power button
10. Backlit battery indicator light
11. Focusing wheel
12. Airow Ventilation
- 3 -
SPECIFICATION
Product dimensions: 3.85 x 3.85 x 0.85 inches
Brightness of projector: 50 lumens
Recommended projection image size: 30 inches to 100 inches
Recommended projection distance: 2.6 feet to 8.5 feet
Contrast: 1000:1
Throw Ratio: 1.2
Resolution: 854 x 480 (WVGA)
Built-in battery: 3.7V/3400mAh
Battery projection time: >2 hours
PROJECTOR COMPATIBILITY
Compatible
Cable Required Examples
Device
HDMI™ to HDMI™ cable (included) Devices with standard HDMI™ ports - DVD/Blu Ray
HDMI™ to HDMI™ cable (included) +
HDMI™ compatible
devices
®
devices
Apple
NOTE: This projector does not have MHL compatibility
*Apple, iPad, iPhone, and iPod touch are trademarks of Apple Inc., reigstered in the U.S. and other countries.
mini HDMI™ adapter (not included)
HDMI™ to HDMI™ cable (included) +
micro HDMI™ adapter (not included)
None Google™ Chromecast, Roku® stick, other streaming media
HDMI™ to HDMI™ cable (included) +
Apple® lightning™ digital AV adapter
(not included)
HDMI™ to HDMI™ cable (included) +
Apple® 30-pin digital AV adapter (not
included)
HDMI™ to HDMI™ cable (included) +
Mini DisplayPort to HDMI™ Adapter
(not included)
players, game consoles, laptops with HDMI™ port,
computers, Apple®TV, Roku®, U-verse®
Laptops with mini HDMI™ ports, GoPro®
Laptops with micro HDMI™ ports, Asus®VivoTab, Sony Vaio
T®, Acer® Aspire S7, Lenovo® Twist, Toshiba® U845W, Acer®
players that plug directly into an HDMI™ port
iPhone® 6 Plus, iPhone® 6, iPhone® 5, iPod® touch 4th gen,
iPad® mini 1st gen, iPad® 4th gen
iPhone® 4s, iPad® 3rd gen, iPad® 2nd gen, iPhone® 4, iPod®
Macbook Air®, Macbook Pro®, iMac®
- 4 -
Aspire v5, Blackberry® Z10
touch 2nd gen, iPad® 1st gen
CHARGING THE PROJECTOR
1. The projector is charged using the included USB to micro USB
cable.
2. The LED indicator light will illuminate white and blink to indicate
the projector is currently charging. Each LED light represents
25% power. When all 4 LED lights are on, the projector is fully
charged. IMPORTANT: Fully charge the projector before rst use
(approximately 3-5 hours).
3. If only one LED light is on and blinking, it means the projector
has low power. If the battery is too low, the projector will
automatically shut off.
WARNING – PLEASE CHARGE THE PROJECTOR EVERY 3 MONTHS
IF NOT BEING USED FOR LONGER PERIODS OF TIME.
SET UP
1. Connect the HDMI cable (included) to the HDMI port and the
other end to your device. NOTE: You may need an adapter to
connect your device to the HDMI cable. Apple® devices require
an Apple® Digital AV adapter (sold seperately) for HDMI use.
For all other devices, check their manufacturer’s instructions.
Additional adapter specic to your device may be required (e.g.
Micro/Mini HDMI).
2. Connect a speaker to the 3.5mm audio jack, if desired.
- 5 -
Loading...