Magnasonic MS857 User Manual
®
MS857
CD Micro System with AM/FM Radio
Instruction Manual
Thank you for your purchase of this Magnasonic product.
Please read this Instruction Manual carefully before using product
to ensure proper use. Keep this manual in a safe place for future
reference.
www.magnasonic.com
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
WARNING
TO PREVENT ELECTRIC SHOCK; DO NOT USE THIS PLUG WITH AN EXTENSION CORD RECEPTACLE OR
OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURES.
TO PREVENT FIRE OR SHOCK HAZARD; DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
DO NOT INSTALL THIS PRODUCT IN A CONFINED SPACE SUCH AS A BOOK CASE OR SIMILAR UNIT.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert
the user to the presence of uninsulated "dangerous voltage" within the products enclosure
that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the literature
accompanying this product.
WARNINGS:
This product uses a laser. To avoid possible eye injuries,
only a qualified service professional should remove the
cover or attempt to service this product.
CAUTION: USE OF CONTROLS OR ADJUSTMENTS
OF PERFORMANCE, OR PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS
RADIATION EXPOSURE.
To reduce the risk of fire or electric shock, do not expose this product to rain or moisture.
DO NOT REMOVE COVER or OPEN THE CABINET
Dangerous high voltages are present inside the enclosure. No user serviceable parts inside. Refer
servicing to qualified personnel only. Use of controls, adjustments or performance of procedures
other than those specified may result in hazardous radiation exposure.
LASER SAFETY
INVISIBLE LASER RADIATION WHEN OPEN,
AND INTERLOCK FAILED OR DEFEATED.
AVOID DIRECT EXPOSURE TO LASER BEAM.
DANGER
13. Only use attachments / accessories specified by the manufacturer.
14. Unwind and straighten the power cord before use.
15. Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider
than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or third prong are
provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
16. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point
where they exit from this product.
17. To completely disconnect the power input, the mains plug of this product should be disconnected from the wall outlet.
The mains plug of this product should not be obstructed and should be easily accessible during use.
18. Damage Requiring Service
Unplug the power cord and refer servicing to qualified service professional under the following conditions:
A. If liquid has been spilled on or into the product.
B. If the product has been exposed to rain, water, or other liquids.
C. If the product does not operate normally by following the operating instructions. Adjust only those controls that
are covered by the operating instructions. Improper adjustment of other controls may result in damage and will
often require extensive work by a qualified technician to restore the product to its normal operation.
D. If the product has been dropped or damaged in any way.
E. When the product exhibits a distinct change in performance. This may indicate a need for service.
19. Servicing
Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltages or
other hazards. Refer all servicing to a qualified service professional.
20. Replacement Parts
When replacement parts are required, be sure the service technician has used replacement parts specified by the
manufacturer, or have the same characteristics as the original parts. Unauthorized substitutions may result in fire, electric
shock, or other hazards.
21. Safety Check
Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to
determine that the product is in proper operating condition.
IMPORTANT SAFETY INSTRUCTIONS
CAUTION: RETAIN THIS MANUAL FOR FUTURE REFERENCE
This product has been designed and manufactured to assure personal safety.
Improper use can result in electric shock or fire hazard. The safeguards incorporated in this product will protect you if you
observe the following procedures for installation, use, and servicing. This product does not contain any parts that can be
repaired by the user.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this product near water.
6. Clean only with a dry cloth.
7. Clean the screen only with a specified cleaning solution for use with products such as laptops and computer monitors.
These are available at most retail consumer electronics stores. Do not clean the inside of this product.
8. Check that the power voltage stated on the rating label corresponds to your local electricity supply. The rating and
caution labels are located at the bottom of this product.
9. Do not block any ventilation openings. Install in accordance with the manufacturers instructions.
10. Do not place this product near any heat sources such as radiators, heat registers, stoves or other apparatus (including
amplifiers) that produce heat.
11. Do not immerse the this product, the power cord or any accessories in water or any other liquid. Also, this product shall
not be exposed to dripping or splashing, and no objects filled with liquids, such as vases, shall be placed on this
product.
12. Unplug the power adaptor from the wall when the product is unused for a long period of time and during thunderstorms.
i
ii
Loading...