Magnasonic MM178K User Manual

For Customer Assistance Call:

Pour joindre le Service d’assistance
à la clientèle, composez le:

1-800-663-5954

MM178K

Auto Time Set Dual Alarm Projection Clock Radio

Radio Réveil – Double Alarme – Projection Heure

USER’S GUIDE

GUIDE DE L’UTILISATEUR

Thank you for your purchase of this Magnasonic product. Please read this Instruction
Manual carefully before using product to ensure proper use. Keep this manual in a
safe place for future reference.
Merci d’avoir fait l’achat de cet appareil Magnasonic. Veuillez lire le présent guide
attentivement avant de faire fonctionner l’appareil pour vous assurer de l’utiliser
correctement. Conservez le présent guide dans un endroit sûr afin de pouvoir vous y
référer au besoin.

www.magnasonic.ca

- 2 -

TABLE OF CONTENTS

Warnings
What’s Included
Important Safety Information
Product Illustration
Power Connection
Operation

Setting the Time Zone
Changing Time Zone
Setting Time and Date
Setting Alarm Time
Setting Alarm ON / OFF and Type
Alarm Duration / Snooze Button
Changing Display Content
Sleep Function
Daylight Savings Time Function
Radio Operation
Reset Function

Projection Unit

Infrared Sensor Operation
Specifications
Warnings
Magnasonic Warranty

WHAT’S INCLUDED

- Clock Radio

- User Manual

- 1 x CR2032 Battery

2
3
4
5
6
6
6
6
6
6
6
7
7
7
7
7
7
7
8
9
9
10

- 3 -

IMPORTANT SAFETY INFORMATION

WARNING

TO PREVENT ELECTRIC SHOCK; DO NOT USE THIS PLUG WITH AN EXTENSION
CORD RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY
INSERTED TO PREVENT BLADE EXPOSURES. TO PREVENT FIRE OR SHOCK
HAZARD; DO NOT INSTALL THIS PRODUCT IN A CONFINED SPACE SUCH AS A
BOOK CASE OR SIMILAR UNIT.

CAUTION: RETAIN THIS MANUAL FOR FUTURE REFERENCE

1. Read these instructions.

2. Keep these instructions.

3. Read all warnings.

4. Follow all instructions.

5. Do not use this product near water.

6. Clean only with a dry cloth.

7. Clean the screen only with a dry cloth, moistened slightly if needed. Do not clean the

inside of the product.

Auto Time Set Dual Alarm Projection Clock Radio

- 4 -

PRODUCT ILLUSTRATION

1. SNOOZE / SLEEP / TIMEZONE button

2. << / MONTH – DAY / °C °F button

3. INFRARED SENSOR

4. >> / YEAR / DST button

5. ON / OFF button

6. PROJECTION UNIT

7. AM / FM BAND button

8. ALARM 1 RADIO / BUZZ button

9. ALARM 2 RADIO / BUZZ button

10. ALARM SET button

11. MODE button

12. FOCUS ADJUSTMENT for PROJECTION

13. LCD DISPLAY

14. SPEAKER

15. TUNING knob

16. VOLUME knob

17. DISPLAY AUTO OFF / LOW / HIGH switch

18. PROJECTION TIME 180° FLIP button

19. PROJECTION ON / OFF button

20. BATTERY COMPARTMENT

21. RESET button

22. FM ANTENNA

23. RATING label

24. TEMPERATURE SENSOR (INSIDE DOOR)

25. AC POWER CORD

- 5 -

POWER CONNECTION

1. Plug the AC power cord into an appropriate wall outlet to power on the unit.

OPERATION

Setting the Time Zone

Upon plugging in the unit, the number 3 will appear on the screen. This number indicated
the time zone that the clock is currently set to. The unit will default to 3 every time the unit
is powered off and on again.

The times zones are numbered as follows:

Zone 1 – Newfoundland

Zone 2 – Atlantic Time

Zone 3 – Eastern Time

Zone 4 – Central Time

Zone 5 – Mountain Time

Zone 6 – Pacific Time
To Change the Time Zone Setting

1. Press the << or >> buttons on the unit to switch between the time zones.

2. When your own time zone number appears on the LCD display, press the MODE

button to save.

Manually Set the Clock Time and Date

1. Press and hold the MODE button in normal mode to enter the set mode.

2. Press the MODE button repeatedly to cycle through the available settings in this

order:

Year → Month → Day → 12/24 Hr → RTC Hour → RTC Minute

3. Once you see the setting you wish to adjust on the LCD screen, press the << or >>

buttons on the unit to adjust the value of the setting.

4. Press and hold the << or >> button on the unit to quickly adjust the values.

Setting the Alarm Time

1. Press and hold the ALARM button in normal mode to enter the set mode.

2. Press the ALARM button repeatedly to cycle through the available settings in this

order:

Alarm1 Hour → Alarm1 Minute → Alarm 1 Weekend → Alarm 2 Hour →

Alarm 2 Minute → Alarm 2 Weekend

3. Once you see the setting you wish to adjust on the LCD screen, press the << or >>

buttons on the unit to adjust the value of the setting.

4. Press and hold the << or >> button on the unit to quickly adjust the values.

Setting Alarm On/Off and Alarm Type

1. Press the ALARM 1 or ALARM 2 button to select the radio alarm or press twice to

select the buzzer alarm. Press three times to turn the alarm mode off again.

2. The alarm will sound at your chosen alarm time.

3. Use the DISPLAY AUTO / ON / OFF switch to choose either to automatically display

the time when the alarm sounds, to always show the time, or to not display the time

on the LCD display.

- 6 -