Magnasonic 20MV405 User Manual

1-800-663-5954

20MV405

Instruction Manual

20” Virtual Flat Television

For Customer Assistance Call:

Thank you for your purchase of this Magnasonic product. Please read this Instruction Manual
carefully before using product to ensure proper use. Keep this manual in a safe place for future
reference.

www.magnasonic.ca

Instruction ManualManual

WARNING

To reduce the risk of fire or electric shock, do not expose this product to rain or moisture.
This television should not be exposed to dripping or splashing and no objects filled with liquids, such as

vases, shall be placed on this television.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

This symbol indicates "dangerous voltage"
inside the product that presents a risk of
electric shock or personal injury.

Caution: To prevent electric shock, match the wide blade of the plug to the wide slot, and insert.
Refer to the identification/rating label located on the back panel of your product for its proper operating

voltage.

Caution: Using video games or any external accessory with fixed images for extended periods of
time can cause them to be permanently imprinted on the picture tube
program logos, phone numbers, etc. may cause similar damage. This
your warranty.

Cable TV Installer: This reminder is provided to call your attention to Article 820-40 of the National

Electrical Code (Section 54 of the Canadian Electrical Code, Part 1) which provides guidelines for proper
grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of
the building as close to the point of cable entry as practical.

Customer Record

You will find the model number and serial number of your TV on the back of your TV set. Record these
numbers in the spaces provided below. Refer to them whenever you call customer service or your dealer
regarding this product.

Caution: To reduce the risk of electric shock, do not
remove cover (or back). No user serviceable parts
inside. Refer servicing to qualified service personnel.

This symbol indicates important
instructions accompanying the product.

ALSO, some network/
damage is not covered by

Model Number:

Serial Number:

Instruction ManualManual

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. Apolarized plug has two
blades with one wider than the other. A grounding type plug has two blades and a third grounding prong.
The wide blade or third prong is provided for your safety. If the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete outlet.

10.Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,
and the point where they exit from the television.

11.Only use attachments/accessories specified by the manufacturer.

12.Use only the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with
the television. When a cart is used, use caution when moving the cart/television combination
to avoid injury from tip-over.

13.Unplug this television during lightning storms or when unused for long periods of time.

14.Refer all servicing to qualified service personnel. Servicing is required when the television has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the television, the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.

15.Warning - This TV should only be serviced by an authorized and properly trained technician.

Opening the cover or other attempts by the user to service this TV may result in serious injury or
death from electrical shock, and may increase the risk of fire.

16.The mains plug and it shall remain readily operable.

FCC Warning

Information to User
This equipment has been tested and found to comply with the limits for a Class B Digital Device pursuant to

part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. lf this equipment receives interference while off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:

1) Reorient or relocate the receiving antenna.

2) lncrease the separation between the equipment and TV.

3) Connect the equipment into an outlet on a circuit different from that to which the TV is connected.

4) Consult the dealer or an experienced radio/TV technician for help and for additional suggestions.

FCC Warning

The user is cautioned that changes or modifications not expressly approved by the manufacturer could void
the user's authority to operate the equipment.

NOTE: In order for an installation of the product to maintain compliance with the limits for a Class B Device,

shielded cables must be used.

,,

WARRANTY.....................................................................................................................................9

,QVWUXFWLRQ0DQXDO

"

2

,QVWUXFWLRQ0DQXDO

For additional instructions, please refer to the operation manuals of any external audio/video equipment

that will be connected to this television.

or

3

Instruction ManualManual

signal is received

FUNCTIONS & FEATURES

Turn On/Off

1. Turn On

Plug in the power cord, and the TV should enter into Standby mode. Pressing

the TV and its power indicator light.

2. Standby

While the TV is on, press the key will put the TV in Standby or off mode. The power indicator
light on the TV set will turn off.

Power

Power

key will turn

on

Function Selection Menus

Picture Menu

Features

This menu allows you to adjust the various picture settings. Use the
up or down arrow key to move between the various settings, and the
left or right arrow key to adjust them.

Color:
Brightness: 0 (dimmest) to (brightest)
Contrast:

int:

T
Sharpness:

0 (minimum color) to (maximum color)
0 (minimum contrast) to (maximum contrast)

-

(more purplish to +)

50

0 (minimum sharpness) to (maximum sharpness)

100

100

100

(more greenish)

50

100

Picture

Color
Brightness
Contrast

Tint
Sharpness

00

50
50
50

50

4

Instruction ManualManual

FUNCTIONS & FEATURES (continued)

Timer Menu

Press the TIMER key on the remote control to access this menu.

imer

Off T

This feature allows you to preset a time when the TV set will turn off.

Off

This feature can be set to Once, Every, or Off .

On T

ime

This feature allows you to preset a time when the TV set will turn on.

Pos

This feature allows you to preset the channel that the TV is tuned
onto when the On Time is activated.

Clock

This feature allows you to set the clock on the TV.

Tuning Menu

Note: This menu is only accessible while the TV is in mode.
Channel: This feature allows you to change the channel being displayed.

Use the left or right arrow keys or the numeric keypad to change the
channel.

:

Air/Cable

antenna or a Cable antenna. Please use Air mode when using an over­the-air antenna, and use Cable mode for a cable hookup. Use the left or

right

Add/Erase: This feature allows you to add or remove a channel currently
being displayed on screen to the "active channel list" .
list is the list of channels that is available by pressing the CH+/- keys. Use
the left or right arrow key to add or erase.

Auto Program:

scanning for all available channels.The list will include only the channels
with an active signal. Press the right arrow key to begin and the left arrow
key to stop the process.

This feature allows you to choose between input from an Air

arrow key to select between the two options.

This feature will setup the Active channel list for you by

Tuning

The active channel

Timer
Off Timer0:00

Off
On Timer 0:00
Off

Pos

2

Clock 0:00

Tuning

Channel

Air/Cable cable

Add/Erase

Add

Auto Program

2

Option Menu

Col Temp

Select among Normal, Cold, Warm modes.

Blue Back

This feature gives you the option to display a blue background on the TV
screen when there is no signal present. Use the left or right arrow key to
toggle between on and off.

Language

This feature allows you to pick a language used for the on screen display
(OSD). Use the left or right arrow key to select the language of your
choice .

Parental

This feature allows parents to block certain programs from being
viewed, based on the programs' rating. In order to access this
menu, you must first enter a password. The factory default
password is 8888. Enter the password when the Parental Guide is
highlighted.

when Block is on.

The setting of TV Rating and MPAA Rating are available, only

5

Option

Col Temp Normal

Blue Back On
Parental Control

Language

Enter password

- - - -

Rate Setting

MPAA Rating
TV Rating
Block Off

New password

English