Magnasonic 07MF121 User Manual

For Customer Assistance Call:

1-800-663-5954

07MF121

7” Digital Photo Frame

Instruction Manual

Thank you for your purchase of this Magnasonic product. Please read this Instruction Manual carefully

before using product to ensure proper use. Keep this manual in a safe place for future reference.

www.magnasonic.ca

SAFETY

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of uninsulated
"dangerous voltage" within the products enclosure that may be
of sufficient magnitude to constitute a risk of electric shock to
persons.

The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying
this Digital Photo Frame.

WARNINGS:

CAUTION : RETAIN THIS MANUAL FOR FUTURE REFERENCE

This unit has been designed and manufactured to assure personal safety.
Improper use ca n result in electric shock or fire hazard . The safeguards
incorporated in this unit will protect you if you observe the followin g
procedures for installation, use, and servicing. This unit does not contain
any parts that can be repaired by the user.

• Read these instructions.

• Keep these instructions.

• Heed all warnings.

• Follow all instructions.

• Do not use this un it near water.

• Clean only with a dry cloth.

• Clean the sc reen only with a specified cleaning solution for use with
products such as laptops and computer monitors. These are available
at mo st retail consumer electron ics stores. Do not clea n th e in side
of the unit.

• Check that the power voltage stated on the power adaptor rating plate
corresponds to your local electricity supply.

• Do not block any ventilation openings. Install in accordance with the
manufacturer instructions.

• Do not install near any heat sources such as radiators, heat registers,
stoves or other apparatu s (including amplifiers) that produce he at.

• Do not immerse the main unit, the power adapter or any accessories
in water or any other liquid.

• Remove the power adaptor from the outlet, when the product is unused
for a long period of time and during thu nderstorms.

• Only use attachments / accessories specif ied by the manufacturer.

• Unwind and straighten the adaptor cord before use.

• Place the product on a firm and leve l su rface.

• Damage Requiring Service
Unplug this product from the wall outlet and refer servicing to qualified

service personnel under the following conditions:

A)

When the power adapter is damaged.

B) If liquid has been spilled or objects have fallen into the product.
C) If the produc t has been exposed to rain, water, or other liquids.
D) If the product does not operate normally by following the operating

inst ructions. Adjus t only those controls th at are cover ed by the
operating instructions. Improper adjustment of other controls may
result in damage and will often require extensive work by a qualified
technician to restore the product to its normal operatio n.

E) If the product has been dropped or damaged in any way.
F) When the product exhibi ts a dis tin ct change in performance. It

indicates a need for service.

To reduce the risk of fire or electric shock, do not expose this product
to rain or moisture.

DO NOT REMOVE COVER or OPEN THE CABINET.

Dangerous high voltages are present inside the enclosure. No user
serviceable parts inside. Refer servicing to qualified personnel only.

Use of controls, adjustments or performance of procedures other
than those specified may result in hazardous radiation exposure.

• Servicing
Do not attempt to service this product yourself

as opening or removing covers may expose you
to dangerous voltage or other hazards. Refer all
servicing to qualified service pers onnel.

• Replacement Parts
When replacement parts are required, be sure the

service technician has used replacement parts
specified by the manufacturer or have the same
characteristics as the origin al parts.
Unauthorized substitutions may result in fire,
electric shock, or other hazards.

• Safety Check
Upon completion of any service or repairs to this

product, ask the service technician to perform
safety checks to determine that the product is in
proper operating condition.

• USA & C ana da versi ons comply
with ETL requirements.

PACKAGE

Examine the contents of the box for your unit. There
should be the following:

• Digital Picture Frame

• Power Adaptor

• Detachable Stand

• Clock battery Lithium CR2025

• User manual

FRONT AND S

6

1. Digital Photo Frame Display -
photo from Memory Card or USB device.

2. Clock/Date/Temperature Display - Display time,
date and indoor temper ature information .

3. Standby/on - Press to t oggle between operating
and standby mode.

4. USB jack - Plug the external USB devices into
this jack.

5. Card socket - Insert the SD/MMC/MS card into
this jack.

6. DC in - Connect with the power adaptor.

IDE

45

PANEL

3

2

Display the digital

1

BACK PANEL

45

7

Digital Photo Frame Display Functional keys

1. Play/ Pa us e/Enter - 1) Pre ss to play o r paus e phot o
playback and slide show playback 2) Confirm selection in
setup mode.

2. Left/Up - 1) Press to select the left photo during photo
playback 2) Select the upper item in setup mode.

3. Right/Down - 1) Press to select the right photo during
photo playback 2) Select the lower item in setup mode.

4. Exit- Press to exit setup mode.

5. Setup - Press to enter setup mode during thumbnail
mode and full screen playback mode.

Clock/Date/Temperature Display Functional key

6. Clock battery - Used to keep the clocks time

7. Mode - Press to select a mode among Clock, Alar m and
Count Down mode.

8. Up - Pre ss t o se le ct u p in v arious me nu o pt io ns

9. Down - Press to select down in various menu options

10. Set- Press to adjust the difference options in Time, Alarm
and Count Down modes.

11. Snooze- Press to enable the Snooze function.

1

3

2

8

6

9

10

11

GETTING STARTED

Installing the Stand

• Insert the detachable stand into the insertable hole on the
back panel.

• Move the stand upward until it is fixed with the Photo Frame

Remark: To avoid damage, please don’t pick up the Digital
Photo Frame by holding the stand only, please use two hands to
hold the Digital Photo Fram e.

Power Connection

Connect the supplied power adaptor from the Digital Photo Frame
to the power outlet.

Inserting the Cl ock Battery (Lithium CR2025)

• Pull out the battery compartment. (Step 1)

• Place the new battery (supplied) and fully insert the battery
compartment ba ck to the original position.
When installing the battery, ensure to match the correct

polarity. (S teps 2 & 3)

3

1

CAUTION:

• Remove the battery if it is exhaus ted, or if the Digital Photo
Frame is not being used for an extended period of time.

• Batteries contain chemical substances, so they should be
disposed of properly.

• There is a risk of dangerous explosion of the battery is
replaced incorrectly, or with a wrong type. Use only the

same type of batter y or an equivalent.

Remarks:

The clock battery is used to maintain the clocks current time/date.
The battery has an approximate life of 10 months to 1 year
(depending on the brand and quality of the battery).

2

Using Your Picture Frame

• Press the Standby/on key on the front panel to turn on the
unit, the start up screen will be displa yed for a few seconds.

• If no Card or USB drive is inserted, the Picture Frame will
play the pre-installed photos automatically.

• If a Memory Card or USB is inserted , the Digital Photo Frame
will read the photos and display them in Slide Show.

• If both Card and US B drive are ins erted, the se lection
screen will be displayed. Press Left/Up and Right/Down
to select the device you want to play, then press

Pause/Enter to confirm and go to Slide Show.

Play/

SD

MMC

MS

SD

MMC

Remark: This Digital Photo Frame supports photos in JPEG
format, pictures with other formats may not able to be loaded or
displayed correctly.

MS

USB

USB

PHOTOS PLAYBACK

Slide Show Playback Mode

The Digital Photo Fram e wi ll play the photos automatically.

• Press the Play/Pause/Enter key to pause the slide show
playback, press again to resume.

• Press the Exit key to return to Thumbnail mode.

Full Screen Playback Mode

The Digital Ph oto Frame will display the selected photo at full size

• Press Left/Up or Right/Down to play the previous or next
photos.

• Press the
pla yback , “Play” will be display ed on scree n for a few
seconds. Press the Play/Pause/Enter key again to pause
the slide show, “Pau se” will be displayed on scree n for
a few seconds.

• Press the Exit key to return to Thumbnail mode.

• Press the Setup key to en ter Setup mode.

Thumbnail Mode

The Digital Photo Frame will sh ow six images at one time on the
screen for easy image selection.

File name of
selected photo

• Press Left/Up or Right/Down to select the photo you want
to display at full size.

• Press Play/Pause/Enter to view the photos at full screen
size.

• Press Exit to return to the Card/USB selection menu if
both Card and USB driv e are inserted .

• Press Setup to enter Setup mode.

Play/Pause/Enter key once to start Slideshow

Playback
source

SD / MMC CARD

/

File na me : 0011 sma ll

Resolution of
selected photo

Res olu ti on:

Current po sition
of thunbnail

1 /2

268 X17 8

SETUP

You can enter the setup menu by pressing the Setup key
during Thumbnail mode and Full screen playback mode.
The setup menu will be shown , press the Left/up or Right/

down key to select the items you want to setup, then press
Play/Pause/Enter to confirm or press Exit to return.

Setup at Thumbnail mode

Below options can be selected in the setup menu:
Image Display - You can select the photo display type in this
option.

• Stretch - The photos will be displayed at full screen size
with horizont al ratio adjustment to fit the screen.

• Crop - The photos will be displayed base on horizontal ratio

and extra vertical parts will be cropped.

• Original - The photos will be displayed ba se on their

original ratio.

Slideshow Effect - You can sele ct different photo tr ansition
effects in slideshow mode: ALL, 3D Flip, 3D Circle, 3D
Float, 3D cube, Shutter, Boxing Shutter, Cross Comb, Insert,
News, Pl ugs Sign, Flabellate, Fade, Shrink.

Slideshow Interval - You can select the display time internal
of each photo in slideshow mode: 3 seconds, 10 seconds,
1 minute, 2 hours.
Color - You can adjust the display Brightness, Contrast,
Saturation and Hue level of the Digital Photo Frame.

• Press Left/Up and Right/Down to adjust the level, then
press Play/Pause/Enter to save or exit, or to discard.

OSD language - You can select the OSD language of the
Digital Photo Frame: English, French, Spanish, Ital ian, Dutch,
German, and Portuguese.

Reset Setting - Reset the Digital Photo Frame to default settings.
Firmware Version - Show the Firmware Version of the Digital

Photo Frame.

Setup in Full Screen Playback Mode

Below options can be selected in the setup menu:
Properties - View the photo information: Camera model, Aperture
size, ISO Value and photo taken date, press EXIT to exit .
Save as lo go – Save the current playback photo as the
startup scr een.
Delete - Delete the current playback photo from the Card or
USB d ri ve.

Zoom - Enlarge the playback photo. Press PLAY/PAUSE/

ENTER continuously to select the zooming step, press

EXIT to exit zooming mode.

Remark: You cannot select the previous or next phot o in
zooming mode, please pres s EXIT to quit first.

Rotate - Rotate the playback photo clockwise.

Press PLAY/PAUSE/ENTER continuously to rotate the ph oto
90 degree per press. Press EXIT to exit rotating mode .

Remark: You cannot select the previous or next photo in
rotating mode, please press EXIT to quit first.

Exit - Exit the setu p menu.

SD

CLOCK/DATE/TEMPERATURE D ISPLAY FUNCTION

MMC

There are 3 modes in the Clock/ Date/Temperature display.
Press the Mode key to exchange below modes:

• Clock mode

• Alarm mode

• Count Down mode

Clock Mode

The following is the default clock mode. The display shows
time, month (1 -12), date, day (Mon - Sun), Week, Indoor
temperature information

Mont h

Hour

Minu te

Date

Day

Temp

Wee k

Time

• Press the Up key to toggle between the 12-hour and
24-hour time display mode.

• Press the Down key to toggle between Celsius (

• Press the Set key to enter the clock setup mode. The

the UP and DOWN key to adjust the clock setting.

• Press the Set key to set Hour first, then press the Up or

• Press the Set key again to set minute, then press the Up or

• Press the Set key again to set the year, then press

• Press Set agai n to set Mo nth, then press Up or Down to

• Press Set again to set the Date, then press Up or Down

• Finally press Set to exit setup mode.

Remark:

• Under setup mode, if no key is pressed after 30 seconds,

• In order to get an accurate temperature measurement,

Alarm mode

Under clock mode, press Mode to enter Alarm mode.

Fahrenheit (

corresponding indicator will flash during setup, then press

Down key to adjust the hour.

Down key to adjust the minute.

Down to adjust the year between range 2000 to 2099.

adjust the month.

to adjust the Date.

the unit will exit setup mode automatically. The final setting
will be saved.

please av oid placing the Digital Photo Frame near heat
or cold sources like heaters and air conditioner.

o

F) temper ature di splay mode.

Minu te

Hour

o

C) or

Up or

How to Setup the Alarm:

• Press the Set key to adjust the hour first, the hour indicator
will f la sh .

• Press the Up or Down key to adjust the hour.

• Press the Set key again to set the minute, the minute
indicator will flash.

• Press

• Press the Set key to exit setup mode and save the setting.

Remark:

Under alarm mode or setup mode, if no key is pressed after 30
seconds, the unit will ex it setup mode and go back to clock
mode automatically. The final setting will be saved.

When the Alarm is ON

• When the time reaches the alarm setting, the speaker inside

• Press either the

• Press the Snooze key to turn off the alarm temporarily. It

Remark: The Snooze function will cancel if the following occur:

1. The time or alarm setting is changed.

2. After it has sounded 3 times.

Up or Down key to adjust the minute.

The Alarm function will turn ON.

the Digital Pict ure Fram e will alarm for 1 minute .

Up/Down/Set/Mode

OFF.

will turn on and sound off the alarm again 3 times every

5 minu tes for 1 minute.

key to turn the Alarm

COUNT DOWN MODE

Under Alarm mode , press the Mode key to enter Count Down
Mode.

Hour

Minu te

How to Set the Count Down Timer

• Press the Set key to adjust the hour first, the hour indicato r
will f la sh .

• Press the Up or Down key to adjust the hour (You can set
the range between 0 to 23 hours).

• Press the Set key again to set the min ute, the minute
indicator will flash.

• Press Up or Down to adjust the minute (You can set th e
range between 0 to 59 minutes).

• Finally press Set to exit setup mode and save the se tting.

Remark: Under Timer mode or setup mode, if no key is pressed
after 30 seconds, the unit will exit setup mode and go back to
clock mode automatically. The final setting will be saved.

Press the Up key once to start the count down, press
hold the count down and press again to resume. When the
remaining time reaches 0, the speaker inside the Picture Frame
will alarm for 1 minute. You can also press any key to turn off
the alarm. When the count down timer is set or counting is on
hold, pressing the
display will indicate 00:00. If no key is pressed after 30 seconds,
the unit will go back to clock mo de automatically.

Down key can cancel the timer setting, the

PROBLEM

Note: Under no circumstances should you try to repair the unit
yourself as this will void the warranty. Only qualified
service personnel can remove the cover or service this unit.

NO POWER

• Check if th e power adapter is properly connected to the
AC power outlet.

• Check if there is power at the AC outlet by plugging in
another appliance.

NO PICT URE

• Check if the unit is switched on.

• Check if the photos stored on the Card or USB device
are in JPEG format.

• Check if the memory card or USB device is inserted
correctly.

FUNCTION DISTURBED

• The normal function of the unit may be disturbed by external
in te rfe re nce . Jus t rese t the un it (d is con nec ti ng and
reconnecting the power cord might be required to resume
normal operation).

twice to

UP