MAGNADYNE PLUS-6850 Owner's Manual

Vehicle Security

User’s Manual

Model: PLUS-5850

For Technical Assistance, please call (800) 638-3600,

or visit www.magnadyne.com

Contents

Remote Control Transmitters / Programming

Alarm Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

System Arming / Disarming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-10

Panic Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Anti-Car Jacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Speciality Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Second System Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Congratulations on your purchase of a quality Carbine automotive security and remote start system. Carbine security products have been designed to provide the consumer with a technologically superior product and years of trouble free operation. The information enclosed will provide a ready reference of the operation and maintenance of your new Carbine security and remote start system.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6

Warnings

As with any product that performs automatic functions, there are certain safety precautions that you must practice and be aware of.

• Keep the transmitter out of children’s reach.

• The vehicle windows must be rolled up.

• Should the unit malfunction, disconnect the fuse until the problem is corrected.

Remote Control Transmitters

The LCD screen on the 2-way remote control displays graphic icons. It provides visual information on any trigger of the sensors and around the clock surveillance of your vehicle, as well as displaying the present status of the system.

2-Way LCD Remote

LCD Remote Icons

Door Lock

Vehicles Doors are Locked

Door Unlock

Vehicles Doors are Unlocked

Armed Mode

Security System is Armed

Valet Mode

Security System is in Valet Mode

Remote Transmission

Transmitting a Signal

In-Range Indicator

You are within Remote Control Range

Door Triggered

Doors are Opened (Zone 3)

Trunk/Hood Triggered

Trunk/Hood are Open (Zone 2)

Second Vehicle

Communicate with a Second Vehicle’s Security System

LCD Display Icons

1-Way Remote

Warn Away

Shock Sensor Triggered (Zone 1)

Shock Sensor

Shock Sensor Triggered (Zone 4)

Power Save Mode

Saves The Battery Power when Transmitter is not in Use

Vibrate Mode

Vibrates when Security System is Triggered

Low Battery

Replace the Transmitter Battery

Ignition

Trigger On Ignition Switch (Zone 5)

Driver Paging / Lost and Found

Someone is Paging you from the Vehicle

System Trigger/Panic

Alerts that the System has been Triggered

Remote Control Transmitters Operation

Transmitter Button

System Function Remark

Lock Doors & Arms System

Arm and Delete the 2-Stage Shock Sensor

Arm System and Hidden Alarm Function

Silent Arming/Disarming

Active Anti-Car Jacking Mode

Unlock Doors & Disarm System

Two Step Door Unlock and Disarm System

Trunk Release - Channel 2

Passive Arming Bypass

Channel 3 Timer Control Output

Car Locator

Panic Function

Press Twice within 3 Seconds

Press within 3 Seconds. For 1-Way Transmitter Press

Ignition in “OFF” Position Ignition in “ON” Position,

Press and Hold for 2 Seconds

Press Twice within 3 Seconds

Press and Hold for 2 Seconds. For 1-Way Transmitter Press

While the System is “Disarmed”. For 1-Way Transmitter Press

For 1-Way Transmitter Press

Press and Hold for 3 Seconds. For 1-Way Transmitter Press for 3 Seconds

Programming the LCD Transmitter

Vibration/Melody Mode

This mode is useful when you are in a noisy place and it is difficult to hear the beep from the transmitter. While in the Vibration/Melody Mode, the transmitter will vibrate if your security system has been activated.

1. Press and hold the and buttons at the same time until one long beep is heard. Programming has now been entered.

2. Within 5 seconds, press the button to select the vibration or Melody Mode. The icon will be displayed on the screen to show the remote transmitter is in Vibration Mode.

3. To exit the Programming Mode, take no action for five seconds. The remote control will generate two long beeps to indicate Programming Mode has been exited.

Power Save Mode

While in the Power Save Mode, the LCD remote transmitter will “Sleep” until a button is pushed, extending the life of battery. When Power Save Mode is “OFF”, the remote control will wake up periodically to check for messages from the security system.

1. Press and hold the and buttons at the same time until one long beep is heard. Programming has now been entered.

2. Within 5 seconds, press the button to toggle between “ON” or “OFF”. The remote will beep twice for “ON”, and once for “OFF”. When Power Save Mode is “ON”, the

icon on the LCD screen indicates entry into Power Save Mode.

3. To exit Programming Mode, take no action for five seconds. The remote control will generate two long beeps indicating Programming Mode has been exited.

Screen Lamp On

Press the button once, and the LCD screen lamp will turn on for 5 seconds.

System Status Check

To check the system’s present status through the LCD screen, press the transmitter button first, then within 3 seconds press and buttons at the same time. The response will be one melody sound, and the LCD screen will be illuminated.

Note: If no response is received, then you are out of range.

Clear the Flash Icon and Melody Sound

Press the button first, then within 3 seconds press the and buttons at the same time. These steps will clear the flash icon and melody sound on the LCD transmitter.

Stop the Trigger Melody Sound

While triggering the alarm the LCD screen will alert the user through a melody sound and a flashing trigger icon. Press any button on the LCD transmitter to stop melody sound only, and the remote control will not send a command to the system.

+ 11 hidden pages