MAGNADYNE PLUS-6000 User's Manual

User’s Manual

Model: PLUS-6000

For Technical Assistance (800) 638-3600,

or visit www.magnadyne.com

Congratulations on your purchase of a quality Marksman automotive security and remote start

system. Marksman automotive security products have been designed to provide the consumer with a product that is technologically superior and will provide years of trouble free operation. The information enclosed will provide a ready reference of the operation and maintenance of your new Marksman security and remote start system.

Remote Control Transmitters

Use the drawing as a reference while reading through the operating procedures.

Regular Transmitter Operation

Transmitter

Button

Seconds

Second

System Function Remark

Lock Doors and Arm System

Arms and Deletes the Shock Sensor Press Twice within 5 Seconds.

Car Locator When System is Armed

Panic Function (On-Off) Press and Hold for 3 Seconds

Unlock Doors and Disarm System

Two Steps Door Unlock and Disarm System Press Twice within 3 Seconds

Silent Arming/Disarming

Channel 2 (Trunk) Timer Control Press and Hold for 2 Seconds

Passive Arming By-Pass While the System Disarmed.

Activate Remote Starter Press and Hold for 1 Second

Turn Off the Remote Start

Security System Operations

Active Lock & Arm

Using The Transmitter To Arm The Security System

1. Press the button on the transmitter.

2. The horn and parking lights will chirp/flash once indicating that the system is now armed. The vehicle’s door will lock upon arming when interfaced with the security system.

Silent Arming/Disarming:

1. Pressing the button on the transmitter will arm or disarm your security system, no chirp sound will be heard, arm/disarm confirmation will be through the vehicles parking lights only.

Defective Sensor Reminder:

If the siren sounds off 3 chirps, you have left open a hood, door or trunk.

Shock Sensor Optional Sensor By-Pass:

Press the button once, the siren chirps once, the security system is now armed. Press the button a second time within 5 seconds, the siren chirps twice, the shock sensor is now bypassed. The sensor bypass feature is programmed to activate for one arming cycle only. The security system will return to normal operation during the next arming cycle.

Passive Arming

Active Arming/Disarming is Controlling your Security System via the remote Transmitter. This Security System is Equipped with an Optional Passive Arming Feature, which Allows the Security System to Arm 30 Seconds after the last Door is Closed.

1. Turn “OFF” ignition and exit the vehicle.

2. After al entrances are closed, the security system LED will flash fast for 30 seconds. If you reopen any door, hood, or trunk. the security system LED will stop flashing. It will begin flashing again once the vehicles entrances are closed.

3. After 30 second timer has elapsed, the security system will automatically “Arm”. The siren will chirp once and the parking lights will flash once.

Passive Arming with Passive Door Locking:

The vehicles door will automatically lock after passive arming cycle has been completed.

Passive Arming By-Pass:

While the LED is flashing for passive arming or automatic re-arm, press the button twice, the security system will respond with 1 chirp and LED will turn “On”. The security system will remain in this temporary state for as long as you wish. To exit passive by-pass, press the “Lock” or “Unlock” button and the system will return to normal status. Note: While in passive arm by-pass mode, you will be required to manually arm you system. Following the “Active Arm” procedure above.

Active Unlock & Disarm

1. Press the button on the transmitter.

2. The horn will chirp once and parking will flash once indicating that the system is now armed. The vehicle’s door will lock upon arming when interfaced with the security system.

Tamper Disarming: (Optional Feature)

If the security system has been tampered with and activated, the siren will chirp 4 times and the parking lights will flash 3 times.

Pathway Illumination: (Optional Feature)

This feature turns”On” the parking lights for 30 seconds upon disarming of the security system. Arming the security system will leave the parking lights on for 10 seconds.

Two Step Door Unlocking: (Optional Feature)

This feature will independently unlock the drivers door only when disarming the security system. Pushing the “Unlock” button a second time within 3 seconds will unlock the entire vehicle.

Automatic Re-Arm: (Optional Feature)

If this feature is selected, the security system will automatically re-arm itself 60 seconds after disarming with the remote transmitter. Automatic re-arm will cancel if any door is opened before the 60 second timer has elapsed.

Valet Mode

The valet switch allows you to temporarily bypass all alarm functions eliminating the need to hand your transmitter to a parking attendant or garage mechanics. When the security system is in valet mode, all functions and remote start functions are bypassed however, the remote panic feature and remote door locks will remain operational. To use the valet mode, the security system must first be disarmed either by using your remote transmitter or by operating the manual override sequence.

Enter Valet Mode:

1. From the disarmed condition, turn the ignition to the “On” position.

2. Push and hold valet switch for 2 seconds or until the “LED” turns on solid. The LED will remain on as long as the system is in “Valet Mode”

Exit Valet Mode:

1. Return to normal operation, turn ignition switch “On”.

2. Push and hold the valet switch for 2 seconds and the “LED” will turn off. This indicates the security system is out of the “Valet Mode”

Disarming without a Transmitter

The override function may be used if the remote transmitter is lost or inoperative.

1. Enter the vehicle and turn the ignition switch to “On” position.

2. Within 10 seconds push and release the valet switch, the security system will enter the disarm mode. You can now start and operate the vehicle normally.

+ 8 hidden pages