MAGNADYNE PLUS-5800 User's Manual

R

Vehicle Security

User’s Manual

Model: PLUS-5800

For Technical Assistance, please call [phone],

or visit www.magnadyne.com

Contents

Remote Control Transmitters / Programming

Alarm Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

System Arming / Disarming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-10

Panic Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Anti-Car Jacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Speciality Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Second System Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Congratulations on your purchase of a quality Carbine automotive security and remote start system.
Carbine security products have been designed to provide the consumer with a technologically
superior product and years of trouble free operation. The information enclosed will provide a ready
reference of the operation and maintenance of your new Carbine security and remote start system.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6

Warnings

As with any product that performs automatic functions, there are certain safety precautions that
you must practice and be aware of.

• Keep the transmitter out of children’s reach.

• The vehicle windows must be rolled up.

• Should the unit malfunction, disconnect the fuse until the problem is corrected.

2

Remote Control Transmitters

The LCD screen on the 2-way remote control displays graphic icons. It provides visual information
on any trigger of the sensors and around the clock surveillance of your vehicle, as well as
displaying the present status of the system.

2-Way LCD Remote

LCD Remote Icons

Door Lock

Vehicles Doors are Locked

Door Unlock

Vehicles Doors are Unlocked

Armed Mode

Security System is Armed

Valet Mode

Security System is in Valet Mode

Remote Transmission

Transmitting a Signal

In-Range Indicator

You are within Remote Control Range

Door Triggered

Doors are Opened (Zone 3)

Trunk/Hood Triggered

Trunk/Hood are Open (Zone 2)

Second Vehicle

Communicate with a Second Vehicle’s
Security System

LCD Display Icons

1-Way Remote

Warn Away

Shock Sensor Triggered (Zone 1)

Shock Sensor

Shock Sensor Triggered (Zone 4)

Power Save Mode

Saves The Battery Power when
Transmitter is not in Use

Vibrate Mode

Vibrates when Security System is Triggered

Low Battery

Replace the Transmitter Battery

Ignition

Trigger On Ignition Switch (Zone 5)

Driver Paging / Lost and Found

Someone is Paging you from the Vehicle

System Trigger/Panic

Alerts that the System has been
Triggered

3

Remote Control Transmitters Operation

Transmitter Button

System Function Remark

Lock Doors & Arms System

-

-

+

+

-

-

+

Arm and Delete the 2-Stage
Shock Sensor

Arm System and
Hidden Alarm Function

Silent Arming/Disarming

Active Anti-Car Jacking Mode

Unlock Doors & Disarm System

Two Step Door Unlock and
Disarm System

Trunk Release - Channel 2

Passive Arming Bypass

Channel 3 Timer Control Output

Car Locator

Panic Function

Press Twice within 3 Seconds

Press within 3 Seconds.
For 1-Way Transmitter
Press

Ignition in “OFF” Position
Ignition in “ON” Position,

Press and Hold for 2 Seconds

Press Twice within 3 Seconds

Press and Hold for 2 Seconds.
For 1-Way Transmitter
Press

While the System is “Disarmed”.
For 1-Way Transmitter
Press

For 1-Way Transmitter
Press

For 1-Way Transmitter
Press

Press and Hold for 3 Seconds.
For 1-Way Transmitter
Press for 3 Seconds

-

-

+

4

Programming the LCD Transmitter

Vibration/Melody Mode

This mode is useful when you are in a noisy place and it is difficult to hear the beep from the
transmitter. While in the Vibration/Melody Mode, the transmitter will vibrate if your security
system has been activated.

1. Press and hold the and buttons at the same time until one long beep is
heard. Programming has now been entered.

2. Within 5 seconds, press the button to select the vibration or Melody Mode.
The icon will be displayed on the screen to show the remote transmitter is in
Vibration Mode.

3. To exit the Programming Mode, take no action for five seconds. The remote
control will generate two long beeps to indicate Programming Mode has been
exited.

Power Save Mode

While in the Power Save Mode, the LCD remote transmitter will “Sleep” until a
button is pushed, extending the life of battery. When Power Save Mode is “OFF”,
the remote control will wake up periodically to check for messages from the
security system.

1. Press and hold the and buttons at the same time until one long beep is
heard. Programming has now been entered.

2. Within 5 seconds, press the button to toggle between “ON” or “OFF”. The
remote will beep once for “ON”, and twice for “OFF”. When Power Save Mode is “ON”, the

icon on the LCD screen indicates entry into Power Save Mode.

3. To exit Programming Mode, take no action for five seconds. The remote control will generate
two long beeps indicating Programming Mode has been exited.

Screen Lamp On

Press the button once, and the LCD screen lamp will turn on for 5 seconds.

System Status Check

To check the system’s present status through the LCD screen, press the
transmitter button first, then within 3 seconds press and buttons at the
same time. The response will be one melody sound, and the LCD screen will be
illuminated.

Note: If no response is received, then you are out of range.

Clear the Flash Icon and Melody Sound

Press the button first, then within 3 seconds press the and buttons at the same time.
These steps will clear the flash icon and melody sound on the LCD transmitter.

Stop the Trigger Melody Sound

While triggering the alarm the LCD screen will alert the user through a melody sound and a
flashing trigger icon. Press any button on the LCD transmitter to stop melody sound only, and the
remote control will not send a command to the system.

5

Programming the LCD Transmitter

Press Buttons at the Same Time: Then Press Button Within: System Function

+

+

5 Sec.

5 Sec.

Switching to 2nd Vehicle
or Returning to 1st

Vehicle Operation

Melody / Vibration Mode

+

5 Sec.

+

3 Sec.

+

3 Sec.

Power Save Mode
LCD Screen Lamp

Turns On for Five Seconds
System Status Check
Clear the Flash Icon

and Melody Sound

Battery Replacement

The LCD remote control is powered by a 1.5 Volt
AAA Alkaline battery. When the power of the
battery weakens the battery icon will be
displayed on the screen. When the old battery is
replaced with a new one, there will be a beep to
indicate the power is up. To replace the battery,
follow the steps in the illustration at left.
Note: Press the button two times when the
battery compartment is empty, then insert the
new battery.

Interference

The transmission range may decrease if the system encounters interference from tall structures or
stronger radio frequencies such as high-voltage power lines.

LED Indicator

LED Function

OFF System is Disarmed
Slow Flashing System is Armed
Fast Flashing System in Automatic Arming
On Solid System in Valet Mode
2 Flashes - Pause Zone 2, Trigger on Trunk/Hook
3 Flashes - Pause Zone 3, Trigger on Door Switch
4 Flashes - Pause Zone 4, Trigger on Shock Sensor
5 Flashes - Pause Zone 5, Trigger on Ignition Switch

6

Parking Lights

Flash Function

1 Flash System is Armed
2 Flashes System is Disarmed
3 Flashes Disarmed / Triggered
12 Flashes Car Locator

Chirp Indicators

Chirp Function

1 Chirp System is Armed
2 Chirps System is Disarmed
3 Chirps Ajar Warning
4 Chirps Disarm / Triggered
6 Chirps Car Locator

System Characteristics

Siren/Horn

1. Arming 1 or 3 Chirps 1 Flash Slow Flash Locking

2. Disarming 2 or 4 Chirps

3. Trigger Alarming Flashes Slow Flash

Parking

Light

2 or 3

Flashes

LED Doors Starter Dome Light

Unlocking

Disabled
(Option)

Disabled
(Option)

Turns on for

30 Seconds

Flashes

4. Panic Alarming Flashes Flashes

5.Car
Jacking

6.Car
Locator

Alarming Flashes

6 Chirps 12 Flashes Locking

Disabled
(Option)

Flashes

7

Manual Arming: Lock & Arm

1. Press the button on the transmitter.

2. The siren will chirp once and parking lights will flash once indicating that the system is now
armed. The vehicle door will lock upon arming when interfaced with the security system.

System Armed Door Ajar Trunk/Hood Ajar

Ajar Warning:

If the siren sounds 3 chirps,
then you have left a door,
trunk, or hood lid ajar.

Silent Arming/Disarming

Press the transmitter and buttons at the same time to arm or disarm your security system.
No chirp sound will be heard. The arm/disarm confirmation will be through the vehicle’s parking
lights only.

Shock Sensor Bypass

Press the button on the transmitter two times within 3 seconds. This will arm the security
system and bypass the shock sensor. The system will chirp one additional time to confirm the
Sensor Bypass Mode was activated. The sensor bypass feature is programmed to activate for one
arming cycle only. The security system will return to normal operation during the next arming
cycle.

Hidden Alarm Function

Press the button first, within 3 seconds press the button to activate the hidden alarm
function. The security system will arm, but the siren / horn will be silenced even if the sensor is
triggered in the armed status.

Automatic Arming

Manual arming/disarming is controlling your security system via the remote transmitter. This
security system is equipped with an optional Automatic Arming feature which allows the security
system to arm 30 seconds after the last door is closed. Operation is as follows:

1. Turn the ignition to the “OFF” position and exit the vehicle.

2. After all entrances are closed, the security system LED will flash fast for 30 seconds. If you
reopen any Door, Hood, Trunk the security system LED will stop flashing. It will begin flashing
again once the vehicle’s entrances are closed.

3. After the 30 second timer has elapsed, the security system will automatically “ARM”. The
siren/horn will chirp once, and the parking lights will flash once.

Automatic Arming with Automatic Door Locking (Programmable)

The vehicle doors will automatically lock after the passive arming cycle has been completed.

8

Automatic Arming Bypass

While the system is in Disarmed Mode, press the button twice. The horn/siren will respond
with one chirp and the LED will turn “ON”. The security system will remain in this mode for as
long as you wish. To exit this mode press the or buttons and the system will return to normal
status.

Manual Disarming Unlock & Disarm

1. Press the button on the transmitter.

2. The siren will chirp twice and parking lights will flash twice indicating that the system is now
disarmed. The vehicle door will unlock and the dome light will turn on for 30 seconds upon
disarming when interfaced with the security system.

System Disarmed Doors Triggered Trunk/Hood Triggered Shock Sensor Triggered Ignition Triggered

Tamper Disarming

If the security system is triggered upon disarm, the siren will chirp 4 times and the parking lights
will flash 3 times.

Pathway Illumination

This feature turns the parking lights “ON” for 30 seconds upon a unlock signal and for 10 seconds
upon the lock signal.

Two-Step Door Unlock

This feature will independently unlock the driver’s door only when disarming the security system.
Pushing the button a second time within 3 seconds will unlock the other doors.

Automatic Rearm

If this feature is selected, the security system will automatically rearm itself within 60 seconds
after disarming with the remote transmitter. Automatic rearm will cancel if any door is opened
before the 60 second timer has elapsed.

Disarming without a Transmitter

The override function may be used if the remote transmitter is lost or inoperative.

1. Enter the vehicle and turn the ignition switch to “ON” position (alarm will sound).

2. Within 10 seconds push and release the valet switch. The alarm will stop sounding and enter

the Disarm Mode. You can now start and operate the vehicle normally.

9

Valet Mode (System in Disarm or Valet Mode)

The valet switch allows you to temporarily bypass all alarm functions eliminating the need to hand
your transmitter to parking attendants or garage mechanics. When the system is in Valet Mode, all
alarm functions and remote start functions are bypassed. However, the remote panic feature and
remote door locks remain operational. To use the Valet Mode, the system must first be disarmed
either by using your remote transmitter, or by operating the manual override sequence.

Enter Valet Mode

1. In the Disarmed Mode, turn the ignition to “ON”
position.

2. Push and hold the valet switch for 2 seconds
until the LED turns on solid. The LED will remain
on solid as long as the unit is in the Valet Mode.

Exit Valet Mode

1. To return to normal operation, turn “ON” ignition.

2. Push and hold valet switch for 2 seconds. The LED will turn off, indicating the system has now
exited the Valet Mode.

Remote Door Lock Remote Door Unlock

Car Locator

While in the Armed Mode, press the button to activate car locator function. The siren/horn will
chirp 6 times and the parking lights will flash 12 times to help you locate your car.

Panic Function

The transmitter can be used as a remote panic switch to manually trigger the alarm system in
case of an emergency.

1. Press and hold the button for 3 seconds to enter the Panic Mode, and horn will start to
sound.

2. While in Panic Mode the transmitter and buttons can be used to lock and unlock the door
(if that option is installed). However, if the button is pressed, the vehicle’s starter disable
device (when installed) will be disabled, allowing the vehicle to start.

3. To turn off the panic function, press and hold the or or button for 3 seconds or press
the button once.

4. If the panic function is not turned off by the transmitter, it will turn off and reset itself after 30
seconds.

10

Anti-Car Jacking

Warning: This security system has a car jacking feature. Its default setting is “OFF”. So be sure to

enable this feature if you feel it is needed.

Active Anti-Car Jacking

1. Press and hold the transmitter and buttons at the same time for 2 seconds while the
vehicle’s ignition is “ON”. The parking lights will turn on for 1.5 seconds to indicate the system
has entered the Anti-Car Jacking Mode.

2. Once the system is armed in the Anti-Car Jacking Mode, the system will trigger when the door
is opened and closed while the ignition is “ON”.

Passive Anti-Car Jacking

1. Turn the ignition switch to the “ON” position, and the system will enter the Anti-Car Jacking
Mode.

2. Once the system is armed in the Anti-Car Jacking Mode, the system will trigger when the door
is opened and closed while the ignition is “ON”.

Trigger the Anti-Car Jacking Mode

A. 50 seconds after the system has been triggered. The siren will start chirping for 15 seconds.
B. During this 15 second period of chirping, you can push the valet switch once to turn off the car

jacking feature.

C. 65 seconds after the system has been triggered. The siren starts sounding and the parking

lights start flashing.

D. 90 seconds after the system has been triggered:

1. The siren will still be sounding and the parking lights flashing.

2. The starter disable will activate to prevent the vehicle from starting.

3. Anti-Car Jacking Mode will remain active until the override procedure is performed or the
vehicle's battery power is exhausted.

Override the System to Turn Off Anti-Car Jacking

Turn the ignition switch from “OFF” to “ON”, and within 10 seconds push the valet switch. The
siren will stop sounding and the security system is now disarmed.

11

Dome Light Supervision

The Security System has a unique feature for using your vehicle’s dome light:

1. Upon disarming the vehicles security system, the interior dome light will remain on for 30
seconds.

2. If the security system is triggered, the dome light will flash for the same duration as the
horn/siren.

Note: Turn “ON” the ignition switch or arm the system to turn off the dome light.

Ignition Controlled Door Locks

If the vehicles door locks have been interfaced with the security system, the system will
automatically lock the doors when the ignition is turned “ON”, or unlock the doors when ignition
key is turned “OFF”.

Trunk Release Output (Channel 2)

Press and hold the button for two seconds to activate the trunk release (Channel 2 Output)
and/or any other devices connected.

Timer Control Output (Channel 3)

Press and hold the and button at the same time to activate the Channel 3 output. Channel 3
is user programmable timer output. You may program the built-in timer to send a ground signal
for any time duration between 1 and 120 seconds. For example, this timer output may be used to
turn on the headlights, power window or sunroof (Factory defaults setting at momentary output.)

Driver Paging / Lost and Found (For LCD transmitter only)

Driver Paging / Lost and Found is useful the event that someone wants to page
the driver of the parked vehicle, or someone cannot find the LCD transmitter.
With the ignition switch in the “OFF” position, press and hold the valet switch for
2 seconds to page the driver. One chirp shall be emitted and the paging melody
continues sounding from the LCD transmitter and will flash on the screen.

Out-of-Range Indication

If the Out-of-Range Indication feature is activated the system will automatically check the range
every 30 minutes after being armed.

1. If the user is within the range, the icon will appear on the LCD screen.

2. If user is out-of-range, the icon will disappear from the LCD screen and the transmitter will
beeps 5 times.

Note: Activating this feature will decrease the life expectancy of the battery.

Power-On Memory

This security system is equipped with circuitry that will allow the unit to remember its alarm state
if the power is lost and then reconnected.

12

Second Carbine Security System Operation

If your transmitters have been programmed to a second Carbine security system, follow the steps
below.

For LCD Remote Control Transmitter

Second Vehicle Operation: While the icon is displayed on the LCD screen, you
can remote control and communicate with a second vehicle security system.

1. Press and hold and buttons at the same time until one long beep is heard.
Programming Mode has now been entered.
Note: No action for five seconds will generate two long beeps indicating the
Programming Mode has been exited.

2. Within 5 seconds, press and hold the button until two beeps are heard and
the icon is displayed on the LCD screen indicating second vehicle operation.

3. While the is displayed, press any button on the transmitter to control the second vehicle’s
security system or alarm function (arm/disarm/trunk).

Note: Button functions are the same for the second vehicle as they are for the first vehicle.

Return to First Car Operation

1. Press and hold and buttons at the same time until one long beep is heard.
Programming Mode has now been entered.
Note: No action for five seconds will generate two long beeps indicating the
Programming Mode has been exited.

2. Within 5 seconds, press and hold the button until one beep is heard and the
icon is not displayed on the LCD screen indicating first vehicle operation.

13

Replacement Parts and Accessories

TRANSMITTERS DESCRIPTION MODEL # $ PRICE

BATTERIES

2-Way LCD Remote for
PLUS-5800 Security System

1-Way Remote for
PLUS-5800 Security System

1.5 Volt AAA Alkaline Battery

CR2032 - 3 Volt Lithium Battery (1 pc.)

Models:

Radio Shack: #23-162
Duracell: #DL2032
Eveready: #ECR2032
Panasonic: # CR2032

CA-RFLCD1 139.95 ea.

CA-RC6HF 59.95 ea.

14

Credit Card or Money Order Only

(Sorry No Cash, C.O.D. or personal checks accepted)

SHIP TO: (No P.O. Boxes)

LAST NAME FIRST NAME INITIAL

STREET ADDRESS

ADDITIONAL ADDRESS

ADDITIONAL ADDRESS

CITY STATE ZIP CODE

DAY TIME PHONE NUMBER

PAR

T # DESCRIPTION

QTY. PRICE EACH TOTAL

Sales Subtotal = ________ . ______

California Residents Add Sales Tax = ________ . ______

Shipping and Handling (See Chart) = ________ . ______

TOTAL = ________ . ______

On regular orders please allow 4-5 weeks for delivery.

Please give a shipping address where this order may be delivered between the hours of 9 am and 5 pm weekdays.

If UPS is unable to deliver, your order will be returned and additional shipping charges will be required.

CREDIT CARD INFORMATION

CREDIT CARD N0.

EXPIRATION DATE

CARD HOLDER’S LAST NAME FIRST NAME INITIAL

STREET ADDRESS

CITY STATE ZIP CODE

Mail to: Magnadyne Corporation

ATTN: Consumer Parts Sales
P.O. Box 5365
Carson, CA 90749-5365

Shipping and Handling

Up to $20.00 $5.00

20.01 to 30.00 5.95

30.01 to 45.00 6.50

45.01 to 70.00 6.95
Over 70.01 7.95

VISA
MC

Call: [phone] Fax: [phone]

Parts and Accessories Order Form

15

Limited Lifetime Warranty

Magnadyne Corporation or its authorized agents will, for the life of the vehicle and to the original
purchaser, repair, replace or refund the retail sales price of said product or any part thereof, at the
option of the Magnadyne Corporation or its authorized agents, if said product or part is found
defective in materials or workmanship, when properly connected and operating on the correct
power requirements designated for the specific product. This warranty and Magnadyne Corporation
or its authorized agents obligations, hereunder do not apply where the product was: damaged while
in the possession of the consumer, subjected to unreasonable or unintended use, not reasonably
maintained, utilized in commercial or industrial operation, or serviced by anyone other than
Magnadyne Corporation or its authorized agent, or where the warning seal on the product is broken
or the power plugs or wires are detached from the unit. Magnadyne Corporation or any of its
authorized agents do not assume any labor costs for the removal and reinstallation of any product
found to be defective, or the cost of transportation to Magnadyne Corporation or its authorized
agents. Such costs are the sole responsibility of the purchaser.

This warranty does not cover the cabinet, appearance items, normal wear and tear or accessories
used in connection with the product resulting from improper installation, alteration, accident,
misuse, abuse or acts of nature.

This Limited Life Time Warranty applies only to the receiver section of the security system. Neither
the siren, transmitters, wire harness or any accessory item added to or used with a Remote Mobile
security system are covered by this Limited Life Time Warranty. Sirens, transmitters, wire harness
or any accessory item are covered by our standard 12 month limited warranty.

Magnadyne Corporation or its authorized agents shall not be liable to anyone for consequential
or incidental damages or claims that may arise due to failure of product to operate properly
except those accorded by law. Magnadyne's or its authorized agents liability to the repair,
replacement of the product as stated above if all conditions of the warranty are met. No
expressed warranty or implied warranty is given except those set forth herein. Magnadyne does
not warrant or guarantee against break in damage or the theft of the vehicle in part or whole, or
against the loss or damage to the contents of any vehicle in which a security system is
installed. Magnadyne security systems are only a deterrent against possible theft.

This warranty extends only to the original purchaser of the product and for the vehicle in which it
was originally installed. This warranty is not transferable or assignable to any person or vehicle.
Defective merchandise should be returned to the original point of purchase or secondly to
Magnadyne Corporation, 1111 W. Victoria Street, Compton, CA 90220. A return authorization must
be obtained before sending, or merchandise may be refused.

© Copyright 2006 Magnadyne Corporation

PLUS-5800-UM 5-2-06 Rev. A