Model: MV-VS2
INPUT SELE
CT
AV
1 INPUT
AV
3 INPUT
AV 1 INPUT
AV 2 INPUT
3 Sour
ce
A/V
Selec
tor
Switch
MV-
VS2
INPUT SELECT
AV
1 INPUT
AV 3 INPUT
AV
1 INPUT
AV 2 INPUT
3 S
our
ce
A/V
Se
lec
tor
Swi
tch
MV-
VS2
INPUT SELECT
AV 1 INPUT
AV 3 INPUT
AV
1 INPUT
AV
2 INPUT
3 Sour
ce
A/V
Selector Switch
MV-
VS2
Installation and User Manual
The MV-VS2 is a mechanical video and audio switching device used to increase the number of inputs to the Mobile Video System
providing greater system flexibility and ease of use. Follow the enclosed diagrams to make proper connections.
Installation
The MV-VS2 has 3-way mounting capability. It can be mounted
under the dash or under a ledge, on the floor or on top of a ledge
and it can also be panel mounted in a cabinet, console or wall.
Installation Notes:
1. Choose a mounting location that provides easy access by
the end user.
Surface Mounting:
Use the “L” brackets provided to secure the MV-VS2 into place.
The brackets can be placed at the top of the MV-VS2 cabinet for
under dash or under ledge mounting or at the bottom of the cabinet for floor or surface mounting. DO NOT mount the MV-VS2
on uneven surfaces which will cause the brackets or chassis to
bend or flex excessively.
Under Dash Mounting
2. Choose a solid mounting surface that will withstand the
pulling and pushing force when the end user is plugging in
and disconnecting devices.
3. If panel mounting, follow the recommendations in point #2.
The mounting surface must be able to withstand the pulling
and pushing force.
Panel Mounting:
Remove the “L” brackets from the MV-VS2 housing and slip on the
panel mount adapter. Use the screws you removed from the “L”
brackets to secure the panel mount adapter to the MV-VS2 chassis.
You must cut a hole in the mounting surface approximately 5” x
1-3/4” in size.
Hole Opening
Surface Mounting
© 2006 Copyright Magnadyne Corporation
Panel Mounting
MV-VS2-INS Rev. A 2-15-06
Connection and Operation
RCA Male Patch Cord
Supplied
POWER SUPPLY
Supplied with
Some MV Systems
VR
L
AV 2 INPUT
AV 3 INPUT
VR
L
AV OUTPUT
LINE
OUT
AUDIO
R
L
VIDEO
Permanent Item:
DVD,
Video Game
AUDIO OUT
Connect Red White Male RCA Connectors from
patch cord connected to MV-VS2 Rear Aux Input
connectors
VIDEO OUT
Connect Yellow Male RCA Connector from patch cord
connected to MV-VS2 Rear Aux Input connectors
RCA Male Patch Cord
Not Supplied
Not Supplied
LINE
OUT
AUDIO
R
L
VIDEO
Permanent Item:
DVD,
Video Game
Not Supplied
Supplied (MV-VS2)
MV VS2 Rear Panel
Auxiliary 2
Auxiliary 3
VIDEO GAME
Not Supplied
CAMCORDER
Not Supplied
AV 1 INPUT
AV 3 INPUT
AV 1 INPUT
AV 2 INPUT
Signal
Source
Switch
Front Panel
INPUT SELECT
or
3 Source A/V Selector Switch
MV-VS2
Installation and User Manual
Model: MV-VS2
1. A 6 foot long RCA male patch cord is provided with the MVVS2 to make the connection from the MV-VS2 output on the
rear panel to the Mobile Video System Screen. Some installations may require a longer cable which can be purchased at a
local electronics store.
2. Both “Rear Aux Inputs” of the MV-VS2 are typically reserved
for permanent items that will not be removed from the vehicle
such as a video game controller, VCD or second DVD.
3. The front panel connection is typically for non-permanent
items that will be removed from the vehicle such as a video
game controller or camcorder.
4. The 3 position switch on the front panel is used to select the
signal source to the Mobile Video system.
Industry Standard Color Code:
Yellow . . . Video Signal
Red = . . . Right Audio Signal
White = . . Left Audio Signal
All the connectors on the MV-VS2 are female
RCA type with industry standard color code
indication. Any device to be connected to the
MV-VS2 will require a 3 conductor Male-toMale RCA jumper cable that will either be
supplied with the device or can be purchased
at a local electronics store.