Magnadyne MV-IPAD2 User Manual

Owner’s/Installation

Manual

Docking Station for use with

IPAD and IPAD 2

Model: MV-IPAD2

For operational or technical assistance, after reading this manual,

please call us toll free at [phone] or visit www.magnadyne.com

Contents

Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Use this Product Safely . . . . . . . . . . . . . . . . . . . . 2

Safety Information . . . . . . . . . . . . . . . . . . . . . . . . 2

Docking Station Functions . . . . . . . . . . . . . . . . . . 3

Inserting an IPAD into the Overhead Housing . . . 4-6
Removing an IPAD from the Overhead Housing . . 7

Adjusting the Overhead Housing . . . . . . . . . . . . . 8

Features

• Overhead in-vehicle docking station for use with
IPAD 1. (Insert included for IPAD 2).

• Built-in continuous band FM transmitter for audio
transmission to vehicle’s radio.

• Built-in IR repeater for audio transmission to IR head­phones.

Use this Product Safely

Driving

Be aware of road and traffic conditions. Always
observe safe driving rules and follow all existing traf­fic regulations. Do not operate this system if doing
so will divert your attention in any way from the
safe operation of your vehicle. Keep the volume at
a low level. If you experience difficulty in operating
the system, park your vehicle in a safe location and
apply the parking brake before making the necessary
adjustments. Viewing of driver seat video source

while driving is strictly prohibited.

Moisture

Do not expose the product to water or excessive
moisture. This could cause electrical shorts, fire or
other damage.

Parking

Parking in direct sunlight can produce very high tem­peratures inside your vehicle. Give the vehicle interior
a chance to cool down before using.

Basic Operation and Function . . . . . . . . . . . . . . . 8-9

Headphone Operation. . . . . . . . . . . . . . . . . . . . . 9

Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

• IPOD dock connector provides power to charge IPAD
while in use.

• Dome lights with selectable trigger input.

• Swivel hinge for optimum viewing angle adjustment.

Proper Power Supply

This product is designed to operate with a 12 Volt DC,
negative ground battery system.

Repairs

Contact our customer service representatives. Do
not attempt to disassemble or adjust this product
yourself.

Installation

The unit should be installed in a horizontal position.

Cleaning

Use a soft cloth with some purified water to clean the
unit. Do not use any cleaner or chemical to clean the
unit. Usually, a dry cloth will do.

Warning

Be careful when inserting the IPAD. Do not apply undue
pressure to the IPAD.

Safety Information

CAUTION:

FCC REGULATIONS STATE THAT ANY UNAUTHORIZED
CHANGES OR MODIFICATIONS TO THIS EQUIPMENT
MAY VOID THE USER’S AUTHORITY TO OPERATE IT.

2

WARNING:

• TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO
RAIN OR MOISTURE.

• THIS DEVICE IS INTENDED FOR CONTINUOUS
OPERATION.

• TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK
AND ANNOYING INTERFERENCE, USE ONLY THE
RECOMMENDED ACCESSORIES.

Docking Station Functions

1

2

3

4

7

5

6

1.

FM Transmitter Adjustment Button: Push the (-)

button to tune to a lower radio frequency, press the
(+) button to tune to a higher radio frequency.

2. FM Transmitter LCD Display: Displays the audio

transmission frequency.

3. Dome Light Button: Press to turn on or off the

dome lights.

4. IPAD Docking Housing Release Button: To release

the docking housing, push the button then gently
pull down the housing. Adjust the housing to the
desired viewing position.

5. Power Button: Press this button to turn the docking

station on or off.

9

8

10

6. Dome Lights.

7. IR Repeater

infrared light and transmitted to the headphones.

8. IPAD Docking Housing Access Door: See the instal-

lation part of this manual for more information.

9. IPAD Eject Button: See the installation part of this

manual for more information.

10. IPAD Sleep/Wake Button: Press this button to

activate the IPAD’s sleep/wake button.

: The audio signal is converted to an

3

Inserting an IPAD or IPAD 2 into the Overhead Housing

8

1. Press the release button on the docking housing.
Gently pull down the housing.

2. Slide open the docking housing access door.

3. Next rotate the housing access door until it locks in
the vertical position.

Note 1: Make sure the IPOD dock connector is out
of the way before inserting the IPAD.

Note 2:

• If you are using Original IPAD go to step 4.

• If you are using IPAD 2 please see steps 3a-3c.

Release Button

USB
Power
Plug

3a. Slide the IPAD 2 insert into the housing.

Warning: The IPAD 2 insert should be inserted
with the straight edge on the left and the cut­outs on the right side (as shown in illustration).

3b. Support the right side of the housing with your

hand and slide in insert from the left side.

4