Magnadyne MV855 User Manual

Warranty

ONE (1) YEAR LIMITED WARRANTY

Magnadyne Corporation or its authorized agents will within 1 year from the date of sale to you,
repair, replace or refund the retail sales price of said product or any part thereof, at the option
of the Magnadyne Corporation or its authorized agents, if said product or part is found
defective in materials or workmanship, when properly connected and operating on the correct
power requirements designated for the specific product. This warranty and Magnadyne Corpo­ration or its authorized agents obligations hereunder do not apply where the product was;
damaged while in the possession of the consumer, subjected to unreasonable or unintended
use, not reasonably maintained, utilized in commercial or industrial operations, or serviced by
anyone other than Magnadyne Corporation or its authorized agents, or where the warning seal
on the product is broken or the power and/or plugs are detached from the unit. Magnadyne
Corporation or any of its authorized agents will not assume any labor costs for the removal and
re-installation of any product found to be defective, or the cost of transportation to Magnadyne
Corporation or its authorized agents. Such cost are the sole responsibility of the purchaser.
This warranty does not cover the cabinet appearance items or accessories used in connection
with this product, or any damage to recording or recording tape, or any damage to the products
resulting from improper installation, alteration, accident, misuse, abuse or acts of nature.

MAGNADYNE CORPORATION OR ITS AUTHORIZED AGENTS SHALL NOT BE LIABLE
TO ANYONE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES OR CLAIMS EXCEPT
THOSE ACCORDED BY LAW. NO EXPRESSED WARRANTY OR IMPLIED WARRANTY
IS GIVEN EXCEPT THOSE SET FORTH HEREIN. NO IMPLIED WARRANTY SHALL
EXTEND BEYOND 1 YEAR FROM THE DATE OF SALE.

This warranty extends only to the original purchaser of the product and is not transferable.
Some states do not allow limitations on how long an implied warranty lasts and some states do
not allow the exclusion or limitation of incidental or consequential damages, so the above
limitations or exclusion may not apply to you. This warranty gives you specific legal rights and
you may have other rights that vary from state to state.
Defective merchandise should be returned to the original point of purchase or secondly, to
Magnadyne Corporation, 1111 W. Victoria Street, Compton CA 90220. Return Authorization
must be obtained before sending, or merchandise may be refused.

Owner’s Manual

Mobile DVD/CD Player

with 8.5" TFT Monitor

MENU

AV

POWER

© Copyright 2006 Magnadyne Corporation MV855-UM Rev. A 10-24-08

Model: MV855

For operational or technical assistance, after reading this manual,

please call us toll free at [phone] or visit www.magnadyne.com

Contents

Caution

Features and Controls
Monitor/DVD Player
Remote Control

Power and Mode Selection
Releasing The Monitor
Turning on The Monitor
Mute Function

AV mode

Picture Control
Contrast/Brightness/Color/FM

DVD Setup
Setup Menu
General Setup
TV Aspect Ratio

Angle Viewing
OSD Language
Screen Saver

Audio Setup
Dolby Digital Setup
Equalizer Settings
Video Setup
Quality
Preferences Setup
TV Type

PBC
Audio
Subtitle
Disc Menu
Parental
Default
Password Setup

Password Mode
Password Change
DVD Functions
Eject
Vol+/Vol-

Mute

3

Play or Pause

5

Audio

6

Stop

7

Arrows

9

Setup

9

Menu

9

Display

9

Number Buttons
Subtitle

10

Title

11

Slow

11

Fast Reverse Searching

12

Fast Forward Searching

12

Previous

13

Next

13

Repeat A-B

13

Repeat

13

NTSC/PAL

14

Angle

14

PBC

15

Zoom

15

GO TO

17

SD/USB Functions

17

20

Connection Diagram

20
20

Installation

20
20

Disc Information

21

Troubleshooting

21
21

Specifications

22

Replacement Parts Form

22
22

23
23

23

23
23
23
24

24
24

24
25

25
26
26
26
27
27
28
28

28
29
29

29
30
30
30

31

32

33

34

35

36

37

Order By Mail

Replacement Parts for MovieVision

TV

MONITOR

DESCRIPTION MODEL # PRICE

DVD Remote MV855RM $39.95 Ea.

®

1 38

Replacement Parts Order Form

Safety Information

Send Orders To : Magnadyne Corporation We Accept Checks, Money Orders, Visa and Master Card

SHIP TO: (No P.O. Boxes)

LAST NAME FIRST NAME INITIAL

STREET ADDRESS (IF PA YING WITH A CREDIT CARD, YOUR BILLING ADDRESS IS REQUIRED)

CITY STATE ZIP CODE

DAY TIME PHONE NUMBER

CREDIT CARD INFORMATION:

CARD TYPE: VISA MASTER CARD

CARD NUMBER EXP. MONTH YEAR

NAME - AS IT APPEARS EXACTLY ON YOUR CREDIT CARD

MV855RM

Shipping and Handling

Subtotal + Ta x Add

Up to $20.00 $5.00

20.01 to 30.00 5.95

30.01 to 45.00 6.50

45.01 to 70.00 6.95
Over 70.01 7.95

ATTN: Consumer Parts Sales Make Checks Payable to: Magnadyne Corporation
P. O. Box 5365
Carson, CA 90749-5365

Part# Description Qty. Price Each TOTAL

Remote Control

California Residents Add Sales Tax = ________ . ______

Shipping and Handling (See Chart) = ________ . ______

$39.95

Subtotal = ________ . ______

TOTAL = ________ . ______

CAUTION:

THIS MOBILE DVD PLAYER IS A CLASS I LASER PRODUCT. HOWEVER, THIS MOBILE
DVD PLAYER USES A VISIBLE/INVISIBLE LASER BEAM WHICH COULD CAUSE HAZARD­OUS RADIATION EXPOSURE IF DIRECTED.
BE SURE TO OPERATE THE MOBILE DVD PLAYER CORRECTLY AS INSTRUCTED. USE
OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPO­SURE. DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO
QUALIFIED PERSONNEL.

CAUTION:

FCC REGULATIONS STATE THAT ANY UNAUTHORIZED CHANGES OR MODIFICATIONS
TO THIS EQUIPMENT MAY VOID THE USER’S AUTHORITY TO OPERATE IT.

WARNING:

• TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIP-

MENT TO RAIN OR MOISTURE.

• THIS DEVICE IS INTENDED FOR CONTINUOUS OPERATION.

• TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK AND ANNOYING INTERFER-

ENCE, USE ONLY THE RECOMMENDED ACCESSORIES.

This product incorporates copyright protection technology that is protected by method claims of
certain U.S. patents and other intellectual property rights owned by Magnadyne Corporation
and other rights owners. Use of this copyright protection technology must be authorized by
Magnadyne Corporation and is intended for home and other limited viewing uses only unless
otherwise authorized by Magnadyne Corporation. Reverse engineering or disassembly is
prohibited.

Region Management Information:

This Mobile DVD Player is designed and manufactured to respond to the Region Management
Information that is recorded on a DVD disc. If the Region number described on the DVD disc
does not correspond to the Region number of this Mobile DVD Player, this Mobile DVD Player
cannot play this disc.

No C.O.D.’s

On regular orders please allow 4-5 weeks for delivery. Please give a shipping address where this order

may be delivered between the hours of 9 a.m. and 5 p. m. weekdays. If UPS is unable to deliver, your order will be

returned and additional shipping charges will be required.

237

Caution

Please read and observe all warnings and instructions in this manual
and those marked on the unit. Retain this booklet for future reference.

There are two kinds of alarm symbols as follows:

The lightning bolt with arrowhead inside in an equilateral

WARNING

CAUTION

triangle is intended to alert the user to the presence o f

dangerous voltage within the product s enclosure that may be
of sufficient magnitude to constitute a risk of electric shock t o
people.

The exclamation point inside an equilateral triangle is intended
to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying
the product.

WARNING

Installation of all TV monitors
must be out of the driver s
field of vision.

Do not try and service these
products yourself, a
qualified service center or
factory service center for all
repairs.

Be careful not to drop or
apply under pressure to the
front panel of your video

monitor. If the screen cracks
due to misuse, your warranty
will be void!

locate

,

or wipe the products with a towel. Do not
operate the equipment until all liquids have
either evaporated or you hav
inspected ataservice center by a qualified
technician. Severe harm or danger can result.

,

Do not mount the product where
it will obstruct the deployment of
the airbag or in an area where it
would affect the driver s ability
to control the vehicle. Also be
careful to avoid mounting the
product where it can become
hazardous during sudden stops
or in the event of an accident.

Use extra caution with any liquids
in your car. If you or your child
spills any liquid on these products,
pull your vehicle to the roadside
and turn the key off t o disconnect

Use only a damp cloth to clean
the screen and use only purified
water on the cloth drying out all
excess water prior to wiping the
screen. Do not use any cleaners
or chemicals to clean the screen.
In most cases a dry cloth will do!

e had the monitor

Specifications

Power

Screen Format

Resolution Pixel

Color System

A/V Input

A/V Output

Dimension

Note: This equipment has been tested and has been found to comply
with the limits foraClassAdigital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference
to radio communications. Operation of this equipment inaresidential
area is likely to cause harmful interference. In some cases, the user will
be required to correct the interference at his own expense.

D C 12V

16:9

1440x234

NTSC/PA L Auto Select

DVD-AV1-A V 2

1 E A

10.6(L)X9.9(W)X2.0(H)inches

3

36

Troubleshooting

Caution

CAUTION

Symptom

Buttons do not work.

No sound

Remote control does
not work properly.

Items to Check

Is the power turned on?

Is the audio which i s connected with
the audio cable set to receive
the DVD signal output?

Is audio cable connected securely?
Is the monitor which i s connected

with the audio cable turned on?
Is the audio output set

in the correct position?

Is the remote control facing
the remote sensor?

Is the distance too far?
Is there any obstacle i n the middle?
Is the battery weak?

Actions to be Taken

Check the car battery capacity.

Select the correct input mode for the audio receiver.
Connect the audio cable into the jacks securely.
Turn on the monitor connected with the audio cable.
Set the Audio Output t o the correct position,

and then turn on the DVD player again b y pressing
the POWER button.

Point the remote control toward the remote sensor o f
the product.

Use the remote control within 15 feet.
Remove the obstacle.
Replace with new battery.

Moisture or condensation on lens

When a disc i s brought from a cold environment toawarm one, there may be moisture
on the the disc, or condensation on the pickup lens. It wil

1. Remove the disc from the DVD player.

2. Turn on the power and leave i t on for an hour to vaporize the condensation.

l a ffect disc playback.

Quality installations are best
performed b y qualified and
certified installers.

Donttouch the unit i f there is
a flash of lightning. You may
receive a n electric shock.

Do not cover or stop up heater
ducts o r vents. It may cause a
fire o r receive a n electric shock.

Watching the monitor for an
extended period of time
without the engine running
may deplete the vehicle s
battery charge.

This product is designed for
operation with a 1 2 Volt DC,
negative ground vehicle. I t
is not suitable for operation
under other conditions o r
voltages.

Do not bring magnetic devices
such a s credit card or magnetic
card near the magnets.

Operating Notes

1. The operating temperature of this product i s limited to 14 ~+140 F.

2. If your vehicle is extremely hot or cold you must allow time for your air
conditioner or heater to cool or heat the vehicle until operating temperatures
have returned to normal operating ranges.

3. Optimal picture quality is achieved when viewed from directly front of the
monitor (+/-30˚ ).

35

attempt to make any repairs

refeR.flesruoydnagnisuohehtnepotonoD.4

servicing to qualified personnel.

5. DVD Players use an invisible laser beam which can cause hazardous radiation
exposure. Be sure t o operate the unit correctly as instructed.

6. Do not cut the car power supply off whileadisc is playing. It can cause
damage to the DVD Player.

4

Features and Controls

Disc Information

Monitor/DVD Player

TV

MONITOR

Remote Control

DVD features

DVD discs provide high-resolution images with high-quality sound. This DVD player
can play not only DVD discs of various versions, but also S-VCD, VCD, audio CD and
MP3 discs.

Discs that cannot be played

DVD-RW, DVD-REM, CD-ROM, CD-EXTRA discs cannot be played on this unit. In
addition, a CD or a CD-RW which was recorded on special software cannot be played.

Region code

Your DVD player is designed and manufactured to region management information
that is recorded o n a DVD disc. Please check the region code.
1: North America 2: Japan 3: Korea and Southeast Asia
4: Australia, Mid&South America 5: Russia 6: China

How to handle the disc

Don t touch the shiny side of the disc (the side with the embedded information).

MENU

AV

POWER

Monitor/DVD Player

Don t stick a label o raglue-based note on either side of the disc.
Don t use discs that have glue or a damaged label with exposed adhesive residue.
It might result i n damage to your DVD player.
Don t put discs in the sunshine.
Park your car in the shade.

How to handle the discs

Only use round discs. Discs with other shapes likeastar,aheart, etc. may cause
damage to the player. If a dis
one. Before playback, wipe the disc outward from the center with a clean cloth. Do not
use any type of solvent such as thinner, benzene, commercially available cleaners o r
antistatic spray. To avoid damaging your DVD player, don t use a scratched disc.

c is dirty, wipe softly with a wet cloth and then withadry

Wireless Headphones
(Not Included)

5

34

Installation

1. Open the package and check that these items are present.

Features and Controls

MENU Button

POWER Button

PLAY/PAUSE Button

INSTALLATION PLATE

UNIT

SCREW A SCREW B

2. Connect the external compoments to the RCA cable or AV output.
(Refer to the connection diagram on page 33)

3. Match the position of installation bracket and
installation plate with screw A.

AV

POWER

4. Tighten the unit with the supplied
screw B.

MENU

AVPOWER

Dome Light Button

MENU

AV

POWER

MENU

SD Input USB Input

.

.

.

X

.

Caution

AV Select Button

+/- Buttons

EJECT Button

AUX Input Jack

AUDIO VIDEO

L

R

AV2INPUTS

Disc loading slot

Do not bring magnetic devices
such as credit cards or magnetic
cards near the monitor.

33

6

Features and Controls

Remote Control

1

POWER
Turns the DVD Player/Monitor on or off.

MUTE

2

Press this button t o switch off the
audio during playback. Press again
to restore the audio.

Auto TV (not included)

3

UP/DOWN/RIGHT/LEFT ARROWS

A/V SELECT

DVD AV1 Av2

MENU (OSD on monitor)
Press this button t o open the on-

screen menu system t o setup and
control various parameters o f the
monitor and DVD player.

UP/DOWN
Use t o move to the desired menu.

P/N

This button permits you to choose
among Multi, PAL and NTSC.

MODE
Use this button t o switch between

three modes

DVD SD USB

MENU (DVD menu)

This button permits you t o view the
menu on the DVD.

SUBTITLE
Use this button t o select th e menu
for choosingasubtitle language.

TITLE ( Title menu)
When a DVD i s playing, press this
button t o view the Title Menu.
DISPLAY
Press t o show elapsed or remaining
time o f a chapter or a title.

PBC ( Video CD only)
Press this button t o access the special
Playback Control functions for VCD

2.0 format Video CD S .
NUMERIC button

Use when makingaselection o n the
menu screen.

TV

MONITOR

RETURN

Press this button t o return to the root menu.
SETUP
Press this button t o display the Setup

menu. The Setup menu enables you
to enter the settings required for the
unit t o work properly.

REPEAT

Press this button t o change the playback
mode t o repeat.

Connection Diagram

Red AUDIO(R)

White AUDIO(L)

Yellow VIDEO

Car dome lamp

WHITE

AV Input

+ 12VDC Battery

Chassis Ground

Trigger Door Trigger Door

Dome Light Trigger

YELLOW

BLACK

RED

ACC

Positive Negative

Switch Switch

GAME

CAMCORDER

(AV 2)

Red AUDIO(R)

White AUDIO(L)

Yellow VIDEO

AV Input

(AV 1)

Output

Red AUDIO(R)

White AUDIO(L)

Yellow VIDEO

AV

GAME

CAMCORDER

AMP

MONITOR

FM ANTENNA

7

32

SD/USB Functions

1. When USB o r SD is inputed, the monitor will be displayed as shown below. But when
you input USB that the function can not change into SD state (only the SD is
moving). You can select the desired menu b y

pressing the MODE button on the

remote control of monitor.

Use the (arrow and ENTER) buttons to select and set desired settings.

2.

00:00

000/003

00:00 kbps

\

..

..

S

Features and Controls

A-B (repeat fromAto B)
Use this button t o select the beginning

and end of a track which you wish t o have
repeat i n playback.

VOL-/+ button
Use t o incease or decrease volume level.

AUDIO
Use this button t o select one of the

audio soundtracks programmed o n a
DVD disc. It is alse used to select the
audio output mode for the DVD
playback.

ENTER
Press this button t o confirm the item
you have found and highlighted using
the arrow buttons. Usually this is done
to confirm a selection or item to be
played o n the DVD.

ZOOM

If your DVD disc supports zooming in
to see the program differently, pressing
this button will enable you t o change
the amount of zoom.

UP/DOWN/RIGHT/LEFT ARROWS
Use thes buttons t o navigate the
various menus and screens for the
monitor and DVD systems.

PLAY/PAUSE
To start playback of a disc, press this
button. Press again t o pause the
playback. I f playback is paused, press
this button to resume playback.

GO TO
Use t o search for a title orachapter

your DVD disc.

STOP

Press this button t o stop the playback

of the current disc.

SKIP FORWARD/BACK
Use these buttons t o skip to the next
or last track, chapter or file on the
disc i n the player.

on

FAST FORWARD/REVERSE PLAY
Use these buttons t o select either fast

forward o r fast reverse playback.

31

8

Power and Mode Selection

Releasing The Monitor

Push the release button (located o n the f ront edge o f the screen housing) and
lower the monitor. You can also adjust th e swivel angle.

MENU

AV

POWER

RELEASE BUTTO N

Make this arrow in DOWN
direction only.

Turning on The Monitor

1. Connect the monitor to external devices.

2. Press the POWER button on either the remote control or the unit once to turn
the power on.

Press the same POWER button t o turn the power off.

POWER

POWER

UNIT

3.Power on the external devices and play.

Mute Function

1. Press the button on the remote control to mute the audio.MUTE

2. Press the button again on the remote control to return to theMUTE
previous volume level.

REMOTE CONTROLLER

DVD Functions

PBC

[DVD]/[AUDIO]/[MP3]

This button does not function i n PBC mode.

[VCD]

You can turn the PBC (Play Back Control) function on or off by pressing this button.
When PBC is loaded, the PBC function is enabled automatically. This function is
similar to selection o f DVD title. Please note that this function does not work with
MP3 dics.

Zoom

2 X
3 X

4 X
1/2

1/3

1 / 4

CONDITION

ZOOMX2
ZOOMX3

ZOOMX4
ZOOMX1 / 2
ZOOMX1/3

ZOOMX1/4

Off

[DVD]

OSD

Some DVDs are programmed to allow you to zoom into
the image, magnifying it. Pressing the ZOOM button
does this in steps, according to the chart to the right.

[VCD]/[AUDIO]/[MP3]

This button does not function i n this mode.

GO TO

The G O TO function allows you t o begin playback ataspecific location on the disc. To
do this, press GO TO and navigate the screen which follows t o select this playback
location.

Title

Move t o the desired title.

Chapter

Move t o the desired chapter.

Audio

Selects the desired audio output.

Subtitle

Select the desired subtitle.

Angle

Watch the different view angle.

TT Time

Total time.

CH Time

Chapter time.

Repeat

Sets the repeat play.

Time Display

Watch play time.

Bitrate 31

Men u
Tit le
Cha pter
Audi

o

Subti

tle

01 / 0 2
06 / 6 1

5.1CH Chinese
OFF

Title Elapsed 0:20:02

9

30

DVD Functions

Power and Mode Selection

Repeat

[DVD]

Pressing REPEAT button changes
the play mode as follows:

OSD CONDITION

Chapter

Title

All

Repeat chapter

Repeat title

All

Repeat o ff

[VCD]

The REPEAT button does not function
when a VCD disc is being played.

[AUDIO]

Pressing REPEAT button changes
the play mode as follows:

OSD CONDITION

Track

All

Repeat single

All

Repeat o ff

[MP3]

Pressing REPEAT button changes
the play mode as follows:

OSD CONDITION

Repeat One

Repeat Folder

Folder

Shuffle

Random

Single

Single

Repeat folder

Repeat folder one time

All

Random play

Single play

Selecting an AV mode

1. Turn the power ON the unit and external devices.

2. Select the DVD, AV1 or AV2 mode b y pressing the AV Select button on
the unit or on the remote control.

3. Play the external device.

NTSC/PAL

This button is used to select the video standard for the DVD mode between NTSC
and PAL formats.

Angle

Some DVD s are recorded with additional footage which allows you to viewascene
fromadifferent camera angle. If the ANGLE feature is enabled in the Setup Menu
(see page 14) and the disc has this option,an angle mark will be displayed on
the screen. When that occurs, press the ANGLE button to see these alternate viewing
angles.

29

10

Picture Control

DVD Functions

Contrast/Brightness/Color/FM

To adjust CONTRAST, BRIGHTNESS, COLOR or FM press the MENU button until
you arrive at the screen for that item. Use the arrow buttons to adjust the value.
Press the MENU button to make another adjustment or leave the MENU system.

1. Bring up the on-screen function menu by pressing the MENU button on the unit
or the remote control.

2. Press the MENU button on the unit or the remote control of monitor until you see
the item you wish to adjust.

3. Use the arrow buttons to adjust the value.

4. Press the MENU button to make another adjustment or leave the MENU system.

CONTRAST

50

BRIGHTNESS

50

COLOR

50

FM

88.1

(FM function added 88.1 88.3MHz)

Prev( )

[DVD]/[VCD]

Press this button to advance the player from the current chapter.to the previous
chapter

[AUDIO]/[MP3]

Press this button to move to the previous track.

Next( )

[DVD]/[VCD]

Press this button to advance the player from the current chapter .to the next chapter

[AUDIO]/[MP3]

Press this button to move from the current track .to the next track

Repeat(A-B)

[DVD]/[VCD]/[AUDIO]

You can set the player to repeat a segment over and over until you cancel it. To do
this, you mark the beginning o f the desired segment (A) and the end of segment (B).
The selected segment will be
repeated automatically until canceled.

OSD CONDITION

A

A B

Start point of repeat

Ending point repeat function

11

28

DVD Functions

Fast Reverse Searching( )

[DVD]

Pressing FR button repeatedly changes
the play mode as follow:

OSD CONDITION

FR 2X

FR 4X

FR 8X

FR 16X

FR 32X

PLAY

Fast Forward Searching( )

[DVD]

Pressing FF button changes
the play mode as follow:

OSD CONDITION

FF 2X

FF 4X

FF 8X

FF 16X

FF 32X

PLAY

2X rewind search

4X rewind search

8X rewind search

16X rewind search

32X rewind search

Play

repeatedly

2X forward search

4X searchforward

8X searchforward

16X searchforward

32X searchforward

Play

[AUDIO]

Pressing FR button
changes the play mode as follow:

OSD CONDITION

FR 2X

FR 4X

FR 8X

FR 16X

FR 32X

PLAY

repeatedly

2X rewind search

4X rewind search

8X rewind search

16X rewind search

32X rewind search

Play

[MP3]

Pressing FR button
changes the play mode as follows:

OSD CONDITION

FR 2X

FR 4X

FR 8X

FR 16X

FR 32X

PLAY

repeatedly

2X rewind search

4X rewind search

8X rewind search

16X rewind search

32X rewind search

Play

[AUDIO]/[VCD]

Pressing FF button
changes the play mode as follow:

OSD CONDITION

FF 2X

FF 4X

FF 8X

FF 16X

FF 32X

PLAY

repeatedly

2X forward search

4X searchforward

8X searchforward

16X searchforward

32X searchforward

Play

[MP3]

Pressing FF button
changes the play mode as follows:

OSD CONDITION

FF 2X

FF 4X

FF 8X

FF 16X

FF 32X

PLAY

repeatedly

2X forward search

4X searchforward

8X searchforward

16X searchforward

32X searchforward

Play

DVD Setup

Setup Menu-Main Page

When the button is pressed, the setup menu will be displayed a s shown
below. Select the menu category and make changes according to your preferences.

1. Press the button if the disc is playing.STOP

2. Press the button to display setup menu.SETUP

3. Use the (arrow and ENTER) buttons to select and set desired settings.

4. Press the button again t o turn off the setup menu.SETUP

SETUP

General Setup Page

TVDisplay
Angle Mark
OSD

Lang

Screen Saver

Go T o General Setup Page

PS
O
EN
On

n

G

27

12

DVD Setup

DVD Functions

General Setup

1. TV Aspect Ratio

In the Setup function called TV Display, you set the player to output the video signal a t the
same aspect ratio a s your monitor. If the monitor i s widescreen format, select WIDE.
If it is a s normal screen (4:3), choose NORMAL/PS (Pan and Scan) or NORMAL L/B
(Letterbox).

2. Angle Viewing

Some DVD discs contain programming which allows you
to viewascene fromafew different camera angles. You
can tell when a scene is so recorded when a n Angle Mark
is displayed on the screen. This mark will only appear if you
have enabled the Angle Mark feature
in the DVD Setup menu.

On: When selected, the screen will be shown with

angle mark.

Off: When selected, no angle mark is shown on

the screen.

3. OSD Language

Use this option t o set the OSD language.
When selected, change t o set th e on-screen display
language.

Normal/PS 4:3 PAN SCAN
Choose this setting i f you want the movie to fill the entire screen.
(This might mean that the left and right edges wontbe seen)

Normal/LB 4:3
Choose this setting i f you want to see the movie in its original aspect ratio.
(The movie might appear with black bars at the top and bottom of the screen.)

Wide 16:9 WIDE SCREEN
Choose this setting i f your DVD Player is connected t o a widescreen TV.
(This opition is available only if the disc has a 16:9 display aspect ratio.)

General Setup Page

TV Display
Angle Mark
OSD L ang
Screen Saver

Set T V Display Mode

TV Display
Angle Mark O
OSD L ang
Screen Saver

Set Angle Mark

TV Display PS
Angle Mark O
OSD L ang EN
Screen Saver On

PS Normal/PS

n

O

NG

E

n

O

General Setup Page

PS

n O
ENG
On

General Setup Page

n

G

Norm al /LB
Wide

n

f

Of

English
Korean
French
German
Italian
Spanish
Por tuguese
Dutch

Subtitle(SUB-T)

[DVD]

This button is used to select the language for the on-screen display system.
(This title menu may vary, depending on the particular DVD.)

Title

[DVD]

Used to display the title menu of the loaded DVD disc.
This function is only present on discs which support it.

Slow( )

[DVD]/[VCD]

Use this button to playadisc in slow-forward or
slow-reverse. Slow playback can be done at five
different speeds. Pressing this button repeatedly
decreases the speed in steps. Pressing a sixth
time returns playback to the normal speed.

OSD

1/2

1/4

1/8

1/16

1/32

1/2

1/4

1/8

1/16

1/32

Play

CONDITION

2X slow forward

4X slow forward

8X slow forward

16X slow forward

32X slow forward

2X slow rewind

4X slow rewind

8X slow rewind

16X slow rewind

32X slow rewind

Play

13

Set OSD Language

26

DVD Functions

DVD Setup

Display

[DVD]

Pressing the DISPLAY on the
remote control changes the play mode as
follows:

OSD

Title Elapsed

Title Remain

Chapter Elapsed

Chapter Remain

Display Of f

button

CONDITION

Display the Title Elapsed

Display the Title Remain

Display the Chapter Elapsed

Display the Chapter Remaining

No sign

[VCD]

Whenever press the button,title chapter
will be displayed as follows:

OSD CONDITION

Single Elapsed

Single Remain

Display Off

Display time

Left display time

No sign

[AUDIO]

Pressing the display button displays
information about the current C D on the
screen as follows:

OSD CONDITION

Single Elapsed

Single Remain

Total Elapsed

Total Remain

Display the single elapsed

Display the single remain

Display the total elapsed

Display the total remaining

[MP3]

Your DVD player will display the counter
automatically when you play the MP3 disc.

Number Buttons

[DVD]

The0through9number buttons are used to enter the number of the track, the number
of the DVD chapter, the time, the date, etc.

[AUDIO]

Select a track by pressing the
corresponding number button.

[DVD]

You can select a track i n the folder by
pressing the corresponding number button.

OSD CONDITION

Select Track:__ Select track no

OSD CONDITION

__:__ Select track no

4. Screen Saver

The screen saver i s useful to prevent your display
from becoming damaged. The screen saver picture
appears when you leave the DVD player in stop mode
for about two minutes.

Audio Setup

Audio Setup Page

Speaker Setup
SPDIF Setup
Dolby Digital Setup
Channel Delay
Equalizer
3D Processing

Go To Speaker Setup Page

General Setup Page

TV Display P S
Angle Mark
OSD L ang
Screen Saver On

Screen Saver

On

NG

E

n

O

O

ff

25

14

DVD Setup

DVD Functions

Show below are two examples of Audio Setups.

1. Dolby Digital Setup

Audio Setup Page

Speaker Setup
SPDIF Setup
Dolby Digital Setup
Channel Delay
Equalizer
3D Processing

Go To Dolby Digital Setup

Dual Mono

Use this function to set the input audio
signal to match your speaker setup.

Dolby Digital Setup

Dual Mono
Dyna mic

Set Stereo Setup

STR

eo

Ster
L-M ono
R-Mon o

Mix-Mon o

Dolby Digital Setup

Dual Mono

a mic

Dyn

Dual Mono (1+1 ) Setup

Dynamic

Use this function to change the setting
from the factory.

Dolby Digital Setup

Dual Mono STR
Dyna m ic

Set DRC Off

2. Equalizer Settings

Audio Setup Page

Speaker Setup
Spdif Setup
Dolby Digital Setup
Channel Delay
Equalizer
3D Processing

Equalizer Page

EQ Type None N one
Bass Boost
Super Bass
Treble Boost

S

R Stereo

T

O

ff

O

ff

Off

-M o

L
R-Mo
Mix-

Rock
P

op
Live
Danc e
Techno
Cla ssic
Soft

n

no

Mon

Stop( )

[DVD]/[AUDIO]

In DVD mode, Press STOP to stop playback.
To resume playback, press PLAY/PAUSE. I f
you press STO P and then PLAY/PAUSE twice,
the player will begin playback at the first

1 Time Press Play Key To Continue

2 Time

scene o f the movie.

[MP3]

In MP3 mode, Pressing STOP will stop
audio playback. Press PLAY/PAUSE to begin

o

o

playback o f the first title on the disc.

the

1 Time Stop Stop

OSD CONDITION

Stop

Disc Stop

OSD CONDITION

Arrows( /// )

[DVD]

In addition to navigating the various menus, you can use the arrow buttons to define the area
of the screen you want to enlarge in ZOOM mode.

[MP3]

After pressing STO P button, select the desired folder and set the condition by pressing
ENTER button.

FULL

3/4

1/2

1/4

OFF

Setup

Pressing the SETUP button opens the Setup Menu, where you can make and adjust DVD
settings t o suit your equipment and preferences.

Menu

[DVD]

Pressing the SETUP brings up the DVD disc menu. The content of this menu varies,
depending o n the programming of the disc.

Go To Equalizer Page

15

Select Equalizer Type

24

DVD Functions

DVD Setup

Eject

When this button i s pressed, the disc is ejected. When this button is pressed for more
than3seconds, t he disc is unconditionally ejected. Use this function if you encounter
difficultly ejectingadisc.

Vol+/Vol-

Use these buttons t o adjust th e audio output level of the speaker from0t o 100.

Mute

Press MUTE to turn off the audio part of the
currently playing program. Press it again to
return the audio volume to the level at which
you were last listening.

OSD CONDITION

Mute

Mute off

Mute off

Play or Pause( )

Whenever this button i s pressed, the mode
switches from pause t o play or play t o pause.

OSD CONDITION

Play Disc

Pause

Mute

EQ Equalizer Type

In this menu you can choose the desired preset
equalizer mode.

(Choose from Rock, Pop, Live, Dance, Techno,
Classic or Soft)

Bass Boost

The Bass Boost function increases the volume
level of the bass frequencies.

Super Bass

Super Bass Boost further increases the volume
level of the bass frequencies.

Equalizer Page

EQ Type
Bass Boost
Super Bass
Treble Boost

Select Equalizer Type

Equalizer Page

EQ Type
Bass Boost
Super Bass
Treble Boost

BossBoost

Equalizer Page

EQ Type No ne
Bass Boost
Super Bass
Treble BoostOff

Super Bass

Non
Off
Of
Off

None
Off

Off
Of
Off

Off
Off

None

e

k

Roc

p

f

Po

e

Liv
Dance

c

Te

no

h

las

C

si

c

Soft

f

Off

O

n

f

Of

Audio

[DVD]

Change the audio output format.
(A the disc supports available audio

vailable only if

type.)

[VCD]/[AUDIO]

Changes the audio output format.
(Available only of the disc supports available audio
type.)

[MP3]

An invalid button press.

23

OSD

1/2: Ac3 2CH English

2/2: Ac3 5.1CH English

OSD

Stereo

Mono Left

Mono Right

Mix Mono

CONDITION

2 Channel

5.1 Channel

CONDITION

Stereo

Mono Left

Mono Right

Mix Mono

Treble Boost

Treble Boost increases the volume level of the upper
frequencies.

16

Equalizer Page

EQ Type None
Bass Boost Off
Super Bass Off
Treble Boost

Treble Boost

Off

On

ff

O

DVD Setup

V ideo Setup

Picture Quality

In the Video Setup, you can make adjustments to various elements of the picture quality.

Video Setup Page

Component YUV
Quality
Divx VOD

Video Quality Setup

lo

C

r M

o
ig h

Br

tn ess

t

C

ra st

on

a

Gam m

e

Hu

ura t

Sat
Luma Delay

I
00
00
None
00
00

ion

1 T

D H

ig h
Med i
Lo

um

w

DVD Setup

Password Setup

1. Password Mode

Password Setup, which is required for using the Parental Controls settings,
is divided into two modules: Turning on the Password function, and setting
a Password. The first step is to turn it on in the Password Mode setting.

Password Setup Page

Password Mode On O n
Passwo

rd

Of f

Go TO Video Quality Setup Page

Colo

r

Sharpness can be adjusted by highlighting it in the menu and then using the
UP/DOWN arrow buttons to increase or decrease the sharpness.

Video Quality Setup

Co lo
Brigh

ontr

C

a m

G
Hu

e

a tu r

S
Luma Delay

C

ol o r

r

tn ess

a s

m

a tion

t

a

MID Hig
00
00

on e

N
0

0

0

0

1 T

h
Medium
Low

Brightness

Use this option to adjust the display brightness. When you reach desired
brightness level, use the / buttons and press the ENTER button.

Video Quality Setup

Colo

r M

Brigh

tn ess 0
Co n t ra st
Ga m m a

ue

H

a ti

Satu r
Luma Delay

Brigh

tn ess

ID

0

00

on e

N

0

0
00

on

1 T

Brightness

Brightn ess

0

Password Mode

2. Password Change

In the Password setup, you must first enter the current 6-digit passcode, and
then you have the opportunity t o change it. The factory default passcode is .
Once you have changed and confirmed the password, press the ENTER button.

Password Setup Page

Password Mode On
Password Cha n g e

Change Password

n

O

Old Password

New Password
Confirm PWD

OK

Please Enter Old Password

136900

17

22

DVD Setup

5. Disc Menu

Use the Disc Menu option t o select the display
language for a DVDsdisc menu display language.
(not the same as the players menu)

1. Press the SETUP button during stop mode.

2. Press the / buttons to move to Preference.

3. Press the / buttons to move to Disc Menu.

4. Press the ENTER button.

5. Press the / buttons to select Disc Menu.

6. Parental

The Parental Control settings limit the player to only play content at or belowacertain
movie rating. The ratings systems in different countries vary. In the USA, the Motion
Picture Association of America(MPAA) rates movies as G, PG, PG-13, etc.
In this menu item, you can set what is the highest level of rating you wish to allow the
unit to play.

Preference Page

TV Type
P

B

C

A

i

u

d

o

S

e

ub titl

Disc Menu

l

Paren t a

t

u

Defa

l

Preferred Menu Language

N
O
ENG

ENG

ts

h

Englis

c

n

Fre

h

c

n

p anis

S

h

ese

Chin

a

se

Ja p

e

n

Kore a n

sia n

R

us
ha i

T

DVD Setup

Contrast

Use this option to adjust the contrast level.
Use the/buttons and press the ENTER button, when you reach the
desired contrast level. The contrast control increases or decreases the ratio of
bright and dark screen sections.

Video Quality Setup

Color MID
Brigh

tn ess

o

C

ntra st
Ga mma
Hue
Saturati on
Luma Delay

on tra st

C

00
0
Non
0
0
1 T

0

e
0
0

Cont ra s

Contrast

t

0

1. Press the SETUP button when stop mode.

2. Press the / buttons to move to Preference.

3. Press the / buttons to move to Parental.

4. Press the ENTER button.

5. Press the / buttons to select desired
parental level.

7. Default

If you select RESET when in the DEFAULT settings
mode, all the settings of the Setup Menu will be
returned to
Parental Level, Region and Password values.

1. Press the SETUP button when stop mode.

2. Press the/buttons to move to Preference.

3. Press the/buttons to move to Default.

4. Press the ENTER button to select Reset.

the factory defaut settings, except for

Preference Page

TV Type
PBC
Au

o

d i

Subtitl

e
Disc Menu
Paren tal
Defaul t

Set Parental Control

Preference Page

TV Type
P

BC

A

o

ud i

S

e

it l

ubt

Disc Menu

a r

ntal

P

e

Def aul

t

Load Factory Setting

Ntsc

1 KID S AF

On

2 G

ENG

3 PG
4 PG 13

G

EN

5 PGR
6 R
7 NC17
8 ADULT

N

c

ts

On

NG

E

EN

G

Reset

Gamma

In some systems, you might experiencealoss in the strength of the dark sections of
the displayed picture. This can be helped by changing the Gamma setting, which
boosts the dark level but leaves the other levels unchanged.

Video Quality Setup

C

olor MID

rig htness

B
Contrast
Gamm a No
Hue

aturation

S
Luma Delay

Gamma

0

0

0

0

H

igh

ne

ed i

M
Lo
Non e

um

w

0

0

0

0
1 T

Hue

Select screen hue level using the direction / buttons and press the ENTER button.

Video Quality Setup

Co lo r M ID

h

Br

t

0

ig

ne ss
Co ntrast
Ga mma N
Hue 00
Saturat ion
Luma Delay001 T

ue

H

0
0

0

o

n

e

Hue

Hue

0

21

18

DVD Setup

DVD Setup

Saturation

Select screen saturation level using the direction / b uttons and press the
ENTER button.

Video Quality Setup

Color MID
Br

s

ig htnes
Co nt ra st
Ga m m a No ne

ue 0

H
Satura ti on 00
Luma Delay

tura tion

S

a

0

0
00

0

1 T

a

S

tu ratio n

Saturation

0

Luma Delay

Select the Luma Delay menu and select the preferred video image quality.

Video Quality Setup

Co lo
Brigh t ne ss
C

ontra st000

G

a

ue 0

H

atu

S
Luma Delay

Luma Delay

r

mm a N

ra

i

t

n

o

M

ID

0
o

e

n

0

0

0

0

T

1 T

1 T

Preference

1. TV Type

Choose the proper TV format appropriate to the
monitor you have connected to the player from
the following: NTSC, PAL or Multi type.

1. Press the SETUP button during stop mode.

2. Press the/buttons to move to Preference.

3. Press the/buttons to move to TV Type.

4. Press the ENTER button.

5. Press the/buttons to select T V Type.

2. PBC (Play Back Control)

This feature is only available when a SVCD disc
is loaded. It allows you to disable o r enable the
PBC (Play Back Control) menu o f VCD discs.

1. Press the SETUP button during stop mode.

2. Press the / buttons to move to Preference.

3. Press the / buttons to move to PBC.

4. Press the ENTER button.

5. Press the / buttons to select TV TypeOn/Off.

3. Audio

Use the audio language menu t o select the subtitle
language that you prefer. If the disc you are playing
has that language available, it will display subtitles
in that language.

1. Press the SETUP button during stop mode.

2. Press the / buttons to move to Preference.

3. Press the / buttons to move

4. Press the ENTER button.

5. Press the / buttons to select desired
audio language.

4. Subtitle

In the Subtitle menu, you can selectasubtitle
language. Please note that subtitle will only
appear in this language if the disc programming
has included it.

1. Press the SETUP button during stop mode.

2. Press the/buttons to move to Preference.

3. Press the/buttons to move to Subtitle.

4. Press the ENTER button.

5. Press the/buttons to select desired
subtitle.

to Audio.

Preference Page

TV Type
PB

C

i

Aud

o

l

b tit

Su

e
Disc Menu
Pare nt a l
D

efa ul t

Set TV Standard

Preference Page

TV Type
PBC
A

d io

u
Subtitle
Disc Menu
Parental
Defa ult

Set PBC State

Preference Page

TV Type

BC

P
Audi

o
Subtitl e
Disc Menu
Pare nt a l
Def a u lt

Preferred Audio Language

Preference Page

TV Type
PBC
A

o

ud i

S

e

ub t itl
Disc Menu
Pare nt a l
Def a u lt

Preferred Subtitle Language

Nt
On
ENG

ENG

Nt
On
ENG

ENG

Ntsc
O
ENG

EN

Ntsc
On
ENG

ENG

sc

sc

n

G

P

A

L

Mult

i

NTSC

O

n

Off

Engl

ish

F

ren c h
Spa ni sh
Ch in e se
Japa nese
K

ore a n
Russia n
Thai

Frenc h
Spa ni sh
Chine se
Ja panese
Korea
Russia n
Thai
Others

n

19

20