Magnadyne MV750T, MV750G User Manual 2

Owner's Manual

7''Screen

Model: MV750G (Gray)

MV750T (Tan)

For operational or technical assistance, after reading this manual,

please call us toll free at [phone] or visit www.magnadyne.com

V

A

AV

M

E

N

U

2

Monitor Functions

1. 3.5mm Headphone Jack: Plug in headphones

to listen to audio output. Note: Headphones
with built-in volume control are required for
proper operation.

2. Audio/Video (2) Input: Use the supplied cable

to connect to an external audio/video source
(AV2).

3. Screen Release Lever: Press it to release the

monitor.

4. DOWN Button: The DOWN button adjust the

monitor’s level in menu mode.

5. MENU Button: Activates the monitor adjust-

ment menu.

6. UP Button: The UP button adjusts the moni-

tor’s level in menu mode.

7. AV Input Button: Press this button to select

between Audio/Video Input 1 and 2.

8.

Dome Light Switch: Use this switch to select if

the dome lights are: off, automatically turn on
when the door is opened or on.

9. Dome Lights

7

6

5

4

8

3

1

2

9

M

E

N

U

A

V

A
V

3

Turning the Unit On:

When the screen housing is open the unit
automatically turns on. Closing the screen will
automatically turn the unit off.

Adjusting the Monitor:

Screen Functions

Changing Input Source

Use the AV button to

change

the play source
between Auxiliary Input 1 (AV1) and Auxiliary
Input 2 (AV2).

Use the UP and DOWN buttons on the screen
housing to adjust the brightness.

Press the MENU button again to select the
next desired monitor adjustment item.

Wait 10 seconds and the menu will automati­cally disappear.

Up
Menu
Down

Press the MENU button to activate the moni­tor adjustment menu. The following will be
displayed on the screen: