Magnadyne M5000CD User Manual
Installation and
Operations Manual
12 MEM 3 PGM 4 RPT 5 RDM 6 INT 7890
POWER
SEL
VOL
VOL
CONTROL
SCAN
AS/PS
DISP
LOUD
BAND
MUTE
EJECT
MODE
AM/FM/CD RECEIVER PULL OPEN 4 X 50W
DIMMER
ELAPSE
SHIFT
M5000CD
Waterproof
AM/FM/WB and CD Stereo Receiver
®
A Registered Trademark of Magnadyne Corporation
Location and Function of Controls at a Glance
2
1
19
4
18
6
16717815
91011
14
21
12 MEM 3 PGM 4 RPT 5 RDM 6 INT 7890
POWER
SEL
VOL
VOL
CONTROL
SCAN
AS/PS
DISP
LOUD
20
BAND
MUTE
EJECT
MODE
AM/FM/CD RECEIVER PULL OPEN 4 X 50W
DIMMER
ELAPSE
2
3
5
6
12
13
SHIFT
Your new M5000CD entertainment system has been designed to give you many years of listening pleasure.
Take a moment to read through this manual and become familiar with the operations and features of this
outstanding product.
It is advisable to keep this manual in your vehicle so it is readily available for reference. Be sure to fill out
and send in your warranty card to ensure that you receive the full benefits of warranty repair in the unlikely
event that your system will need service. We are confident that you will thoroughly enjoy your new mobile
entertainment system.
Introduction
1. Power: Turns the unit On/Off.
2. Audio Mode Selection Button: Selects the desired audio mode in the following order: Volume, Bass,
Treble, Balance and Fader.
3. Audio Control Buttons: Adjusts the Volume, Bass, Treble, Balance and Fader.
4. Scan Button: Scans through the strong stations in the current radio band.
5. Multi-Function Buttons: Adjusts the radio frequency, sets the clock, and changes CD tracks.
6. Multi-Function Button 1, 7, 8, 9, 0:
Radio: Recalls a memorized radio station, and programs a radio station into memory (See Radio
Operation for more information).
CD: Directly accesses CD track number (See CD Operation for more information).
7. Multi-Function Button 2/MEM:
Radio: Recalls a memorized radio station, and programs a radio station into memory (See Radio
Operation for more information).
CD: Directly accesses CD track number. Programs a CD track into memory (See CD Operation for
more information).
3
8. Multi-Function Button 3/PGM:
Radio: Recalls a memorized radio station, and programs a radio station into memory (See Radio
Operation for more information).
CD: Directly accesses CD track number. Enters CD track program mode (See CD Operation for more
information).
9. Multi-Function Button 4/RPT:
Radio: Recalls a memorized radio station, and programs a radio station into memory (See Radio
Operation for more information).
C
D:
Directly accesses CD track number
. Continuously repeats the same track (See CD Operation for more
information).
10. Multi-Function Button 5/RDM:
Radio: Recalls a memorized radio station, and programs a radio station into memory (See Radio
Operation for more information).
C
D:
Directly accesses CD track number.Plays all tracks on the current disc in random order (See CD
Operation for more information).
11. Multi-Function Button 6/INT:
Radio: Recalls a memorized radio station, and programs a radio station into memory (See Radio
Operation for more information).
C
D:
Directly accesses CD track number.Plays the first several seconds of each track on the current
disc (See CD Operation for more information).
12. Band Button: Selects the radio band in the following order: FM1, FM2, AM, WX.
13. Display Button: Displays either the clock or radio station. (See setting the clock for more information).
14. AS/PS Elapse Button:
Radio: Automatic memory storing and preset scan (See Radio Operation for more information).
C
D:
Displays elapsed time of current CD track.
15. Loud Button: Enhances high frequency and low frequency sound quality.
Dimmer Button: Adjusts the brightness of the LCD display backlight.
16. Eject Button: Ejects the disc from the CD slot when the CD door is open.
17. Mode Button: Changes sequentially through the following sources:
Radio Tuner > CD > CD Changer > Auxiliary > Radio Tuner.
18. Play/Pause and Mute Button:
Radio/Aux In: Mutes audio level.
C
D:
Starts CD play function or pauses CD play function.
19. Display Area: Displays Radio, CD and Clock functions.
20. Waterproof CD Slot: To access the CD Slot, pull the tab at the top of the door to open.
21. Reset Button: Resets control logic of CPU in the event of a lockup. See General Operations/Reset but-
ton for more details.
Location and Function of Controls at a Glance
4
Radio Operation
Listening to the Radio
1. Push the “POWER” button (1) once to turn the unit on.
2. Press the “BAND” button (12) to select a radio
band: FM1, FM2, AM or WX (weather band).
3. AM or FM Station Selection
Automatic Seek Station Selection: Press the
or button (5) to automatically seek the
next strong station.
Scan Station Selection: Press the button
(4) to automatically scan through strong stations in the current radio band. The radio will
pause for 5 seconds at each strong station.
Each frequency will flash in the display. Press
the scan button again to hold the current station.
Manual Station Selection: Press the or
button for more than 3 seconds to manually
select stations, and "MAN" will appear in the display. Use either button to manually seek up and
down the frequency scale.
Note: If either button is not pressed for several
seconds, the unit will return to Automatic Seek
Station selection and "AUTO" will appear in the
display.
Weather Band Station Selection (WX)
Press the “BAND” button four times to select
WX, then use the or button to manually
seek the stations.
Sound Controls
Programming the Radio
You can program up to 20 FM radio stations and 10 AM
radio stations.
Manual Station Recall Programming
1.
Press the “BAND” button (12) to select a radio
band: FM1, FM2, or AM.
2. Select the desired station.
3. Press and hold one of the ten station recall but-
tons (6-11), the button number and "CH" will
appears in the display area. Release the button.
4. Repeat the Steps 1-3 to memorize additional stations as desired.
Automatic Station Store
1.
Press the “BAND” button (12) to select a radio
band: FM1, FM2 or AM.
2. Press the button (14) for more than 2 seconds, the radio will then search the current frequency and check the signal strength until the six
strongest stations are stored into the corresponding preset number button. When completed, the
system will scan the stored stations automatically.
Preset Scan
Press the button (14) to scan the preset stations. The radio will hold at that preset number for
several seconds, then will scan again. To stop
scanning when a desired station is reached press
the button again.
Adjusting the Volume, Bass Treble, Balance and
Fader
1. Press the button (2) to select the desired
audio mode. The audio modes will be displayed in
the following order: Volume, Bass, Treble,
Balance and Fader.
2. Press the or buttons (5) to adjust the
sound of the audio mode selected.
Initial Volume Level
To program the Initial Volume Level, adjust the
volume to the desired level, then press the
"POWER" button for more than 3 seconds. The
next time the unit is turned on, the volume will be
at this initial level.
Adjusting the Audio Beep
Press the button for more then 2 seconds
to turn beep On/Off. When the beep is on the
icon will be displayed.
Adjusting the Loud Feature
Press the LOUD button (15) to increase the bass
and treble output, "LOUD" will then be displayed.
Press the button again to release this function.
Mute
In Radio/Aux In mode, press the button (18)
mute audio level. Press the button again to
release this function.
MUTE
AS/PS
AS/PS
AS/PS
SCAN
Loading...