Magnadyne M12A User Manual
User’s Manual
4/5/6
54
C
Model: M12A
For Technical Assistance, please call (800) 638-3600,
or visit www.magnadyne.com
Congratulations on your purchase of a quality Marksman automotive security and remote start
4/5/6
54
C
SET
Bi
6
system. Marksman security products have been designed to provide the consumer with a
technologically superior product with years of trouble free operation. The information enclosed will
provide a ready reference of the operation and maintenance of your new Marksman security and
remote start system.
Remote Control Transmitters
The LCD screen on the remote control displays graphic icons. It provides you visual information on
any trigger of the sensors and around the clock surveillance to your vehicle as well as showing the
present status of the system.
2-Way LCD Remote
LCD Display Icons
1-Way Backup Remote
Battery Replacement
The remote control is powered by a 1.5V type AAA Alkaline battery. When the power of the battery
weakens the battery icon will be displayed on the LCD screen. When the old battery is replaced
with a new one, there will be a beep to indicate the power is up and the clock on the LCD screen
returns to AM12:00 after displaying all the icons. Correct the time by pressing SET for 3 seconds
before using. Note: Even if the battery is replaced, your programmed set values shall remain
unchanged. The remote control automatically reads and memorizes all the previous set information
saved in the main control module.
Warning:
Press the button two times when the
battery compartment is empty,
then insert the new battery.
2
Remote Control Transmitters Operation
Transmitter Button
-
+
+
+
+
+
-
System Function Remark
Lock Doors & Arm System
Panic Function Press and Hold for 3 Seconds
Car Locator Under Armed Mode
Arm and Delete the 2 Stage
Shock Sensor
Silent Arming/Disarming Ignition in “OFF” Position
Active Anti-Car Jacking Mode
Channel #4 Timer Output (4)
Channel #5 Timer Output (5)
Channel #6 Timer Output (6)
Unlock Doors & Disarm System
Two Steps Door Unlock and
Disarm System
Trunk Release Channel 3
Press Twice within 3 Seconds
Ignition in “ON” Position,
Press and Hold for 2 Seconds
Press Twice within 3 Seconds
Press and Hold for 2 Seconds
-
-
-
Passive Arming Bypass
Arm System and
Hidden Alarm Function
Activate or Turn Off
the Remote Start
While the System
is in “Disarmed” Mode
Press within 3 Seconds
Press Twice within 3 Seconds
3
LCD Display Transmitter Operations
Transmitter Button
-
SET
-
SET SET
SET
SET
SET
SET
-
-
=
-
=
-
=
=
-
SET
SET-SET-SET
Sound on the LCD Screen Transmitter
System Function Remark
Systems Trigger Record Check
System’s Status Check
Button Lock
Optional Driving Pager
Monitor Interior Temperature
Daily Timer Start
LCD Screen Lamp
Turns ON for 5 Seconds
Clear the Flash Icon and Melody
Press within 3 Seconds and Hold
“Lock” Button for 2 seconds
Press and Hold for 1 Second
Press within
3 Seconds
Press within
3 Seconds
Press within
3 Seconds
Press within
3 Seconds
Press within
3 Seconds
Button Lock:
Button Lock is useful if you want to disable the transmission function of the remote control
temporarily to prevent from any inadvertent pressing of buttons by others.
The regular remote control transmitter:
Press the button first, within 3 seconds press and hold the button for 2
seconds to activate or cancel the button lock function. The “LED” will pause flash for a few
seconds to indicate the remote control transmitter is on “Button Lock” mode while pressing
the transmitter button.
The 2-Way remote control transmitter:
Press the SET button first, within 3 seconds press and hold the button for 2
seconds to activate or cancel the button lock function.
Note: The icon will display on the LCD screen to show the remote transmitter is in “Button
Lock” mode.
Chirp Indicators
Chirp Function
1 Chirp System is Armed
2 Chirps System is Disarmed
3 Chirps Defective Reminder
4 Chirps Disarm / Triggered
6 Chirps Car Locator
4
LED Display
LED Function
OFF System is Disarmed
Slow Flashing System is Armed
Flash System in Passive Starter Disable
Fast Flashing System in Passive Arming
On Solid
2 Flashes - Pause Zone 2, Trigger on Trunk/Hook
3 Flashes - Pause Zone 3, Trigger on Door Switch
4 Flashes - Pause Zone 4, Trigger on Shock Sensor
5 Flashes - Pause Zone 5, Trigger on Ignition Switch
System in Valet Mode
Zone 1, Warn Away Trigger
Parking Light
Flash Function
1 Flash System is Armed
2 Flashes System is Disarmed
3 Flashes Disarmed / Triggered
12 Flashes Car Locator
Constant On Under Remote Start
System Characteristics
Siren/Horn Parking Light LED Doors Starter Dome Light
1. Arming 1 or 3 Chirps 1 Flash Slow Flash Locking Disabled
2. Disarming 2 or 4 Chirps 2 or 3 Flashes Unlocking
3. Trigger Alarming Flashes Slow Flash Disabled Flashes
4. Passive
Starter
Disable
5. Panic Alarming Flashes Flashes
6.Car
Jacking
7.Car
Locator
Alarming Flashes Disabled Flashes
6 Chirps 12 Flashes Locking
Fast Flash Disabled
Turns on for
30 Seconds
5
Active Arming: Lock & Arm
1.Press the button on the transmitter.
2.The siren will chirp once and parking lights will flash once indicating that the system is now
armed. The vehicle door will lock upon arming when interfaced with the security system.
System Armed Door Ajar Trunk/Hood Ajar
Clear the Flash Icon:
Press the SET button 3 times
within 3 seconds to clear the
flash icon on the LCD screen
transmitter.
Defective Sensor Reminder:
If the siren sounds 3 times, there is a Door, Trunk, or Hood left open. (See Alarm Feature I-4)
Silent Arming/Disarming:
Press the transmitter or button at the same time will arm or disarm your security system,
No chirp sound will be heard, arm/disarm confirmation will be through the vehicles
parking lights only.
Shock Sensor Bypass:
Press the button on the transmitter two times within 3 seconds. This will arm the security
system and bypass the shock sensor. The system will chirp one additional time to confirm the
sensor bypass mode was activated. The sensor bypass feature is programmed to activate for one
arming cycle only. The security system will return to normal operation during the
next arming cycle.
Passive Arming:
Active arming/disarming is controlling your security system via the remote transmitter. This
security system is equipped with an optional passive arming feature which allows the security
system to arm 30 seconds after the last door is closed. Operation is as follows:
1. Turn the ignition to the “OFF” position and exit the vehicle.
2. After all entrances are closed, the security system LED will flash fast for 30 seconds. If you
reopen any Door, Hood, Trunk, the security system LED will stop flashing. It will begin flashing
again once the vehicles entrances are closed.
3. After the 30-second timer has elapsed, the security system will automatically “ARM”. The
siren/horn will chirp once and the parking lights will flash once also.
Passive Arming with Passive Door Locking (See Alarm Feature 1-2 Programming)
The vehicle doors will automatically lock after passive arming cycle has been completed.
Passive Arming Bypass
While the system is in disarmed mode, press the button twice. The horn/siren will respond
with one chirp and the LED will turn “ON”. The security system will remain in this mode for as
long as you wish. To exit this mode press the or buttons and the system will return to normal
status.
6
Loading...