Magnadyne M11RF-LCD User Manual

User’s Manual

Model: M11RF-LCD

Two-Way Communication LCD Transmitter

4/5/6

For Technical Assistance, please call (800) 638-3600,

or visit www.magnadyne.com

The remote control is powered by a 1.5V type AAA Alkaline battery. When the power of the battery weakens the battery icon will be displayed on the LCD screen. When the old battery is replaced with a new one, there will be a beep to indicate the power is up and the clock on the LCD screen returns to AM12:00 after displaying all the icons. Correct the time by pressing SET for 3 seconds before using. Note: Even if the battery is replaced, your programmed set values shall remain unchanged. The remote control automatically reads and memorizes all the previous set information saved in the main control module.

Congratulations on your purchase of a quality Marksman automotive security and remote start system. Marksman security products have been designed to provide the consumer with a technologically superior product with years of trouble free operation. The information enclosed will provide a ready reference of the operation and maintenance of your new Marksman security and remote start system.

Remote Control Transmitters

Door Unlock/Disarm

Silent Arm/Disarm

Door Lock/Arm

Battery Replacement

Engine

Start/Stop

System’s Status Check

The LCD screen on the remote control displays graphic icons. It provides you visual information on any trigger of the sensors and around the clock surveillance to your vehicle as well as showing the present status of the system.

4/5/6

Warning:

Press the button two times when the battery compartment is empty, then insert the new battery.

SET

Remote Control Transmitters Operation

Transmitter Button

System Function Remark

Lock Doors & Arm System

Panic Function

Press and Hold

for 3 Seconds

Car Locator Under Armed Mode

Arm and Delete the 2 Stage

Shock Sensor

Press Twice within

3 Seconds

Silent Arming/Disarming Ignition in “OFF” Position

Active Anti-Car Jacking Mode

Ignition in “ON” Position,

Press and Hold for 2 Seconds

Channel #4 Timer Output (4)

Channel #5 Timer Output (5)

Channel #6 Timer Output (6)

Unlock Doors & Disarm System

Two Steps Door Unlock and

Disarm System

Press Twice within 3 Seconds

Trunk Release

Channel 3

Press and Hold for 2 Seconds

Passive Arming

Bypass

While the System

is in “Disarmed” Mode

Arm System and

Hidden Alarm Function

Press within 3 Seconds

Activate or Turn Off

the Remote Start

Press Twice within 3 Seconds

( )

LCD Display Transmitter Operations

Transmitter Button

System Function Remark

SET (C)

Systems Trigger Record Check

Press within

3 Seconds

SET SET

(C)

System’s Status Check

Press within

3 Seconds

SET

Button Lock

Press within 3 Seconds and Hold

“Lock” Button for 2 seconds

SET

Optional Driving Pager

Press within

3 Seconds

SET

Monitor Interior Temperature

Press within

3 Seconds

SET

Daily Timer Start

Press within

3 Seconds

SET

LCD Screen Lamp

Turns ON for 5 Seconds

Press and Hold for 1 Second

SET-SET-SET

Clear the Flash Icon and Melody

Sound on the LCD Screen Transmitter

Button Lock:

Button Lock is useful if you want to disable the transmission function of the remote control temporarily to prevent from any inadvertent pressing of buttons by others.

The regular remote control transmitter:

Press the button first, within 3 seconds press and hold the button for 2 seconds to activate or cancel the button lock function. The “LED” will pause flash for a few seconds to indicate the remote control transmitter is on “Button Lock” mode while pressing the transmitter button.

The 2-Way remote control transmitter:

Press the SET button first, within 3 seconds press and hold the button for 2 seconds to activate or cancel the button lock function.

Note: The icon will display on the LCD screen to show the remote transmitter is in “Button Lock” mode.

Chirp Indicators

Chirp Function

1 Chirp System is Armed 2 Chirps System is Disarmed 3 Chirps Defective Reminder 4 Chirps Disarm / Triggered 5 Chirps Car Locator

LED Display

Parking Light

System Characteristics

Siren/Horn Parking Light LED Doors Starter Dome Light

1. Arming 1 or 3 Chirps 1 Flash Slow Flash Locking Disabled

2. Disarming 2 or 4 Chirps 2 or 3 Flashes Unlocking

Turns on for

30 Seconds

3. Trigger Alarming Flashes Slow Flash Disabled Flashes

4. Passive Starter Disable

Fast Flash Disabled

5. Panic Alarming Flashes Flashes

6.Car

Jacking

Alarming Flashes Disabled Flashes

7.Car

Locator

6 Chirps 12 Flashes Locking

LED Function

OFF System is Disarmed Slow Flashing System is Armed Flash System in Passive Starter Disable Fast Flashing System in Passive Arming

On Solid

System in Valet Mode

Zone 1, Warn Away Trigger 2 Flashes - Pause Zone 2, Trigger on Trunk/Hook 3 Flashes - Pause Zone 3, Trigger on Door Switch 4 Flashes - Pause Zone 4, Trigger on Shock Sensor 5 Flashes - Pause Zone 5, Trigger on Ignition Switch

Flash Function

1 Flash System is Armed 2 Flashes System is Disarmed 3 Flashes Disarmed / Triggered 12 Flashes Car Locator Constant On Under Remote Start

Active Arming: Lock & Arm

1. Press the button on the transmitter.

2. The siren will chirp once and parking lights will flash once indicating that the system is now armed. The vehicle door will lock upon arming when interfaced with the security system.

Clear the Flash Icon:

Press the SET button 3 times within 3 seconds to clear the flash icon on the LCD screen transmitter.

Defective Sensor Reminder:

If the siren sounds 3 times, there is a Door, Trunk, or Hood left open. (See Alarm Feature I-4)

Silent Arming/Disarming:

Press the transmitter or button at the same time will arm or disarm your security system, No chirp sound will be heard, arm/disarm confirmation will be through the vehicles parking lights only.

Shock Sensor Bypass:

Press the button on the transmitter two times within 3 seconds. This will arm the security system and bypass the shock sensor. The system will chirp one additional time to confirm the sensor bypass mode was activated. The sensor bypass feature is programmed to activate for one arming cycle only. The security system will return to normal operation during the next arming cycle.

Passive Arming:

Active arming/disarming is controlling your security system via the remote transmitter. This security system is equipped with an optional passive arming feature which allows the security system to arm 30 seconds after the last door is closed. Operation is as follows:

1. Turn the ignition to the “OFF” position and exit the vehicle.

2. After all entrances are closed, the security system LED will flash fast for 30 seconds. If you reopen any Door, Hood, Trunk, the security system LED will stop flashing. It will begin flashing again once the vehicles entrances are closed.

3. After the 30-second timer has elapsed, the security system will automatically “ARM”. The siren/horn will chirp once and the parking lights will flash once also.

Passive Arming with Passive Door Locking (See Alarm Feature 1-2 Programming)

The vehicle doors will automatically lock after passive arming cycle has been completed.

Passive Arming Bypass

While the system is in disarmed mode, press the button twice. The horn/siren will respond with one chirp and the LED will turn “ON”. The security system will remain in this mode for as long as you wish. To exit this mode press the or buttons and the system will return to normal status.

System Armed Door Ajar Trunk/Hood Ajar

+ 14 hidden pages

Magnadyne M11RF-LCD User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual