Magnadyne M10 User Manual

For Technical Assistance (800) 638-3600

For Fax on Demand Technical Assistance (800) 994-9977

(Must be a Registered Dealer to Use Fax on Demand System)

Model: M10

User’s Manual

M10UM 2/20/02 12:26 PM Page 1

Congratulations on your purchase of a quality Marksman automotive security and remote start system. The information enclosed will provide a ready reference of the operation and maintenance of your new Marksman security and remote start system.

Regular Transmitter Operation

Operation

Lock Doors and Arm System.

Arm and Noiseless Mode. Press within 3 Seconds.

Arm and Delete the Zone 1/Shock Sensor.

Press Twice within 3 Seconds.

- -

Arm and Delete the Zone 4/Optional Sensor. Press Third Time within 3 Seconds.

- - -

Arm and Delete the Zone 1/Shock Sensor,

Press Fourth Time within 3 Seconds.

Delete the Zone 4/Optional Sensor. Unlock Doors and Disarm System.

Disarm and Channel 2 (Trunk) Timer Control. Press and Hold for 2 Seconds.

2 Seconds

Two Steps Door Unlock and Disarm System. Press Twice within 3 Seconds. Silent Arming/Disarming Ignition in "OFF" Position. Hidden Alarm Function.

Activate Car-Jacking.

Ignition in "ON" Position and Press and Hold for 2 Seconds.

2 Seconds

Car Locator.

Panic Function. Press and Hold for 3 Seconds.

3 Seconds

Activate Remote Start. Press and Hold for 1 Second.

1 Second

System's Status Check. For M10RF-LCD Only. Channel 2 (Trunk) Timer Control. Press and Hold for 2 Seconds.

2 Seconds

Passive Arming By-Pass. While the System Disarmed. Turn Off the Remote Start. Switching Code for 2nd Car Operation or For M10RF-LCD Only.

Transmitter

System Function Remark

Button

Lock Doors, Arm System and Turn

Chirp Confirmation

On Paging Sensor.

2 Seconds

M10UM 2/20/02 12:26 PM Page 2

LED Display

Second Vehicle Transmitter Programming: (Random code transmitters does not have this feature)

Your 8-button remote transmitter can be utilized to control a second vehicle security system. To program the remote control transmitter to a second vehicle, follow the instructions for Transmitter programming. All programming parameters be the same except for the following:

1. Prior to pushing any button on the transmitter. Press the select ( ) button first.

2. Once the ( ) button is pressed the LED on the transmitter will illuminate for 3.5 seconds.

3. While the LED is illuminated, press any button on the remote control transmitter.

LED Function

Off Disarmed Slow Flash Armed Fast Flash Passive Arming On (Solid) Valet Mode

LED Function

1 flashes... pause Zone 1: Trigger on-Board Shock Sensor 2 flashes... pause Zone 2: Trigger on Trunk/Hood 3 flashes... pause Zone 3: Trigger on Door Switch 4 flashes... pause Zone 4: Trigger on Optional Sensor 6 flashes... pause Zone 6: Trigger on Ignition Switch

Chirp Function

1 Chirp Arm 2 Chirps Disarmed 3 Chirps Defective Reminder 4 Chirps Disarm / Triggered 6 Chirps Car Locator

Parking Lights Function

1 Flash Arm 2 Flashes Disarmed 3 Flashes Disarm / Triggered 12 Flashes Car Locator Constant On Under Remote Start

Siren, Horn Parking Light LED Doors Starter Dome Light

1. Arming 1 or 3 Chirps 1 Flash Slow Flash Locking Disable

2. Disarming 2 or 4 Chirps 2 or 3 Flashes Fast Flash Unlocking Turns on for 30 Seconds

3. Trigger Alarming Flashes Slow Flash Disable Flashes

4. Panic Alarming Flashes Flashes

5. Car-Jacking Alarming Flashes Disable Flashes

6. Car Locator 6 Chirps 12 Flashes

Chirp Indicators

Parking Lights

Alarm Operating Condition

M10UM 2/20/02 12:26 PM Page 3

1. Press ( ) button on the transmitter.

2. The siren will chirp once and parking light will flash once indicating that the system is now armed. The vehicle doors will lock upon arming when interfaced with the security system.

System Arm

Door Ajar Trunk/Hood Ajar

Defective Sensor Reminder:

If the siren sounds 3 chirps, then you have left a door, trunk, or hood lid ajar. (See feature "I-4 programming).

Silent Arming/Disarming:

Press the ( ) button on the transmitter will arm or disarm your security system. No chirp sound will be heard, arm/disarm confirmation will be through the vehicle's parking lights only.

Noiseless Mode:

Press the ( ) button once. The siren chirps once, The system is armed. Press the ( ) button within 3 seconds. The siren chirps once again, the system is now in "Noiseless Mode". On this mode trigger the zone 1 shock sensor or zone 4 optional sensor the trigger timer will reduced from 60 seconds to 15 seconds. The noiseless feature is programmed to activate for one arming cycle only. The security system will return to normal operation during the next arming cycle.

Shock Sensor/Optional Sensor By-Pass:

1. Press the ( ) button once. The siren chirps once. The system is armed.

2. Press the ( ) button a second time within 3 seconds. The siren chirps once, the Zone 1/Shock Sensor is now bypassed.

3. Press the ( ) button a third time within 3 seconds. The siren chirps twice, the Zone 4/Optional Sensor (connected to 4-pin plug) is now bypassed.

4. Press the ( ) button a fourth time within 3 seconds. The siren chirps three times, the Zone 1/Shock Sensor and the Zone 4/Optional Sensor (connected to 4 pin plug) are now bypassed.

Note: The sensor bypass feature is programmed to activate for one arming cycle only. The security system will return to normal operation during the next arming cycle.

Hidden Alarm Function:

Press the ( ) button first then press the ( ) button within 3 seconds. the security system will arm and with "Hidden Alarm Function". The siren/horn will be silenced and parking light/dome light will not flash even if the sensors are triggered in the armed status.

Active Arming (Lock and Arm)

M10UM 2/20/02 12:26 PM Page 4

+ 8 hidden pages