Magnadyne LS4001S, LS4000B, LS4001B, LS4000W User Manual

OWNER'S MANUAL

LS4000W, LS4000B, LS4000S LS4001W, LS4001B, LS4001S

AM/FM Stereo Receiver and Compact Disc Player

Designed for In-Wall Installation of All Recreational Vehicles, Motor Homes and Mobile Housings

12 Volts DC

U.S. Patent No. D502, 461

A Registered Trademark of Magnadyne Corporation

INTRODUCTION

REPEAT

ALL

Please read all of the information in this booklet before using this unit to insure that you fully understand the capabilities of this unit.

CONTROLS AND FUNCTIONS

WARNING! To prevent fire or electrical shock hazard, do not

expose this product to rain or moisture, or remove cover or bottom screws. No user serviceable parts inside. Refer servicing to qualified service personnel.

9 6

7 2

CONTROLS AND FUNCTIONS

1. Power Button (PWR)

Press this button in to turn the unit on. Press again to turn the unit off.

9. Skip Up Button ( )

To skip to the next higher track on the compact disc, press this button.

2. AM/ FM Button

Press the button to select the desired AM or FM radio band.

3. CD / Tuner Button

Press this button to select the desired playing mode either AM/FM radio or CD player.

4. Radio Station Tuning Knob

Rotate this knob to locate the radio station that you desire. Rotating it clockwise will take you up the frequency band and rotating it counter-clockwise will take you down the frequency band.

5. Compact Disc Door

By pressing the compact disc door next to the word “PUSH” the door will open to allow you to insert a compact disc.

6. Play/ Pause Button ( )

After inserting a compact disc press this button to begin compact disc play. Pressing this button again will stop the compact disc until the button is pressed again.

7. Stop Button ( )

When this button is pressed, compact disc play will stop.

8. Skip Down Button ( )

To skip to the next lower track on the compact disc, press this button.

10. Program Button

Use the program button to arrange the tracks on the disc to play in the order you wish. (See compact disc operation)

11. Dial Indicator

The dial indicator will move up and down the scale as you rotate the tuning knob (4) indicating the station you are listening to.

12. Tone Button

This button will tailor the overall tone of the unit. Pushing the button in will achieve lower tones and pushing the button again will achieve higher tones.

13. Volume Control Knob

Rotate this knob clockwise to increase the volume of the unit.

14. Speaker A, B and A+B Selector

To play the "A" set of speakers, slide the selector to the "Speaker A" position. To play the "B" set of speakers, slide the selector to the "Speaker B" position. To play the "A" and "B" speakers at the same time, slide the selector to the center position.

15. Compact Disc Display

This display contains all the information about the disc that is playing and all the modes the disc can play under. (See compact disc operation).

CONTROLS AND FUNCTIONS

REPEAT

ALL

16. Random Button

Use the random button to play the disc tracks in a random order selected by the disc player's computer.

17. Repeat Button

Use the repeat button to continuously play one song repeatedly or to continuously play the entire disc repeatedly.

Radio Operation:

1. Press the PWR button (1) in to turn the unit on.

2. Press the CD/TUN button (3) to select radio operation.

This Area Lights Up for CD Operation

This Area Lights Up for Radio Operation

Compact Disc Operation:

1. Press the PWR button (1) in to turn the unit on.

2. Press the CD/TUN button (3) to select CD operation.

3. Press the door (5) and gently pull the compact disc door

open fully.

4 Insert a disc onto the disc hub and press gently in the center

until the disc is secure and supported by the hub.

5. Close the compact disc door until it snaps into place. Allow

10 seconds for the system to read the disc.

Use the skip down button (8) or skip up button (9) select a specific track.

7. Press the play button (6) and adjust the volume and tone

controls as desired.

8. Press the stop button (6) to stop disc play.

3. Press the AM/FM button (2) to select either the AM or FM

radio band.

4. Tune in the desired radio station by rotating the tuning knob (4).

5. Adjust the VOLUME (13) and TONE (12) as desired.

FM Stereo Operation:

The unit will automatically switch from FM mono to FM stereo when the signal strength increases to a stereo level. If the signal should become weak on stereo reception, the unit will switch back to the mono mode.

Warning ! Never touch the laser eye. Moisture and oils from your fingers can impair proper operation.

+ 8 hidden pages