Magnadyne BT-HFKP10 User Manual

Operation

and Installation

Manual

BT-HFKP10

Bluetooth Wireless Hands Free Kit

• Never install the product in a location where it
interferes with your field of vision.

• Thi

s product must be installed and used in accor­dance with this manual. Any alterations to this
product that enables it to be used in any way
other than intended or designed could distract
the driver and result in an accident causing injury
or death. Magnadyne Corporation disclaims any
and all liability that may result from failure to
install and operate in any other manner in which
this was intended.

•

Do not disassemble or modify the unit. Do not dis­assemble, modify the unit or attempt to repair the
product yourself. If the product needs to be
repaired, consult your dealer.

• Do not install the unit in a spot exposed to direct
sunlight or excessive heat or humidity. Also avoid
places with too much dust or the possibility of
water splashing.

• Check local laws regarding use of a mobile

handset and speakerphone while driving. If
you use the speakerphone while driving,
ensure your attention and focus remains on
your responsibility of driving safety.

•

Observe all signs that require an electrical device
or RF radio product to be switched off in the desig­nated areas. These could include hospitals, blast­ing areas, and potentially explosive atmospheres.

•

Turn off your speakerphone prior to boarding an air­craft. Do not use your speakerphone in an aircraft.

FCC Compliance Statement:

This device complies with part 15 of the FCC
rules. Operation is subject to the following two
conditions:

1.

This device may not cause harmful interference.

2. This device must accept any interference
received, including interference that may
cause undesired operation.

Safety and Caution

Bluetooth Speakerphone Introduction

2

Speakerphone

Kit Contents

BatteryMounting Clip

VPA Charger

This portable Bluetooth speakerphone is specially designed for the user to enjoy the convenience of wire­less communication. Use in a vehicle like a hands-free car kit or on a desk-top like a conference speaker­phone. The built-in microphone with D.S.P. technology has echo cancellation along with noise suppression
to deliver impeccable sound quality.

Bluetooth Technology

Bluetooth wireless technology revolutionized personal connectivity by providing freedom from wired
connections and enabling connectivity between mobile computers, mobile phones, portable handheld
devices and other Bluetooth enables devices within 30 feet. Bluetooth wireless technology utilizes global
sound and digital data 2.4G ISM transmission.

3

PLEASE READ PRIOR TO INSTALLATION

CAUTION: Majority of vehicles manufactured today include air bag systems that inflates with great force dur-

ing an accident. If necessary, contact the vehicle’s manufacturer for air bag information specific to the vehicle.
DO NOT place an object, including all components in the area over the air bag or in the air bag deployment
area. If the components are improperly installed, serious injury could occur during inflation of the air bag.

• Mount components securely to prevent shifting that could cause injury or interfere with the vehicle
being operated safely.

• This hands-free kit is intended for 12 Volt DC operation only.

Installing the Battery:

1. Remove the battery cover from the speaker­phone.

2. Insert the battery into the speaker phone pay­ing particular attention to the - and + indica­tors on the battery.

3. Reinstall the battery cover on the speaker­phone.

Charging the Speakerphone:

Insert the charger into a vehicle power outlet
and the charging plug into speakerphone’s
charging socket. Charge the battery fully before
using for the first time. Normal charging time is
approximately 3 hours. The LED indicator will
flash red when charging and will be off when
charging is completed. Remove the charger
from speakerphone and the vehicle power outlet
when charging is completed.

Notes:

1. Low power indication: The LED will flash red

every 3 seconds when the speakerphone is
running low on power. Charge the speaker­phone immediately. If battery is not charged
the speakerphone will automatically shut off.

2. Charging indication may be delayed for a few

minutes if the speakerphone has not been
used for a long time or the battery is drained.

Installation

+

Mounting Speakerphone:

Insert the mounting clip into the speaker phone.
The mounting clip can be inserted from the top
or bottom to accommodate different mounting
locations.

Indicator

-

Indicator

Battery Cover