Magnadyne ALA95FKE User Manual

VEHICLE CONTENTS

PROTECTION MODULE

OPERATION MANUAL

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference; and
(2) This device must accept any interference received, including interference that may cause undesired operation.

Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications
to this equipment. Such modifications could void the user’s authority to operate the equipment.

Model: ALA95FKE

Congratulations on your purchase of Silencer’s “Vehicle Contents Protection
Module”. The Silencer VCPM was designed to enhance your vehicle’s exist-
ing security system by providing protection for items inside the passenger’s
compartment of your vehicle. Typically, a factory installed security system is
designed to prevent the theft of the vehicle but it usually will not protect the
contents of the passenger’s compartment. With the addition of the Silencer
VCPM your vehicle is protected from theft and the items inside the vehicle
are also protected.

To operate your new Silencer Vehicle Contents Protection Module, follow
the instructions enclosed.

There are two (2) components of the

VCPM that you will need to know how

to use. The rest of the operation is automatic.

Valet Switch LED Indicator

Note: In some vehicles the LED and valet switch will be in separate locations while in other

vehicles, they will be located together in a housing at the bottom edge of the dashboard.

Daily Operation

1. The LED indicates to you and others that the VCPM is active and pro­tecting the interior of your vehicle when it is flashing.

2. Every time you turn off the ignition of your vehicle, the LED will begin
to flash. When the ignition key is on, the LED is off .