Magma A10-1225 User Manual

OWNER’S MANUAL

™

Gourmet Series Marine Gas Grill

Model A10-1225

For questions regarding performance, assembly,
operation, parts, or returns, contact the experts
at MAGMA by calling TOLL FREE IN U.S.A. AND
CANADA 1-800-86-MAGMA
7:00 a.m. - 5:00 p.m. Pacific Time Monday thru
Friday or e-mail us at [e-mail]

Read all instructions before operating. Save manual for future reference.

IMPORTANT SAFETY WARNINGS

READ ALL INSTRUCTIONS BEFORE OPERATING.

• USE OUTDOORS ONLY.

• DO NOT USE THIS APPLIANCE INSIDE THE BOAT OR ANY ENCLOSED SPACE.

• GRILLS RADIATE HEAT. CLEARANCE FROM COMBUSTIBLES, 24” SIDES AND
BACK. NEVER USE UNDER AWNINGS, PATIO COVERS, ETC.

• USE PROPANE GAS ONLY. FUEL STORAGE SHOULD BE IN COMPLIANCE WITH
THE AMERICAN BOAT AND YACHT COUNCIL (ABYC) STANDARDS A-1 (9),
MARINE LIQUIFIED PETROLEUM GAS (LPG) SYSTEMS.

• FOR NATURAL GAS APPLICATION CONTACT MAGMA.

• ALWAYS LIGHT GRILL WITH LID OPEN.

• NEVER LEAVE HOT GRILL UNATTENDED.

• USE HOT PAD WHEN HANDLING.

• ALWAYS TURN GRILL OFF AFTER USE.

Each Magma®Gas Grill is individually fire tested before it leaves the factory.

For this reason, the burner on your grill may be slightly discolored.

INSTALLATION INSTRUCTIONS

•Uses standard 1-lb. disposable propane canisters (DOT-39 NRC 228/286).

•Prior to installing valve, become familiar with the valve function and graphics
on valve knob. Never force the knob. Always turn or push gently.

•Turn control valve to “lock” and install gas canister being careful not to
cross the threads. Check for leaks prior to use.

•Position valve with gas bottle as shown (A).
Gently insert valve stem into valve chamber
while rotating until valve stem key aligns
with valve chamber lock detent allowing
valve to fully insert. Rotate gas canister
down and away so knob faces you (B) or
straight up (C) depending on application.

CONTROL VALVE REGULATOR

2

(C)

(A)

(B)

Fasteners are supplied for both Single Mount and Dual Mount grill mounting

MOUNT HARDWARE

options. See Magma Catalog or Website for best mount selection.

Single mount through-bolt

applications

4 Carriage bolts & lock nuts.

Single mount non-through-bolt

applications, including Style 1 “Levelock”

4 Hex head bolts & lock washers.

Dual mount applications

4 Carriage bolts & lock nuts. Only 4 bolts

required for grill mounting. Place bolts (2 per

side) diagonally from each other as shown.

Carriage bolt

& lock nut

Hex head bolt
& lock washer

ON-BOARD FUEL SYSTEMS APPLICATION

•For on-board LPG (Propane) Systems, use Magma Type 3-High Output­Low Pressure LPG Control Valve and Magma Low Pressure LPG Hose Kit.

•For on-board CNG (Natural Gas) Systems, use Magma Type 4-High Output­Low Pressure Natural Gas Control Valve.

See Magma website for
replacement part numbers
and valve applications.

www.MagmaProducts.com

Warming Rack

Radiant Plate

Liner

Thermometer

Lid Lock

Grill Grates

Burner

Outer Shell

Match Light
Hole

Mount
Support Pad

Slide Out
Grease Tray

Valve Chamber

Control Valve Regulator
Type 1 High­Output Shown

3

Piezo Igniter