Page 1
Project_________________________
Item No.________________________
Quantity________________________
Model MK62S Tube Fired Gas Fryer
STANDARD ACCESSORIES
Tank-stainless steel
Cabinet-stainless steel front, door
and galvanized steel sides and back
One tube rack
Integral Flue Deflector
Two twin size baskets
One drain extension
One drain line clean-out rod
Removable basket hanger for easy cleaning
6” (15.2 cm) Adjustable legs
Model MK62S Tube Fired Gas Fryer
STANDARD SPECIFICATIONS
CONSTRUCTION
Welded tank with an extra smooth peened
finish ensures easy cleaning.
Long lasting, high temperature alloy stainless
steel heat baffles are mounted in the heat
exchanger tubes to provide maximum heating
and combustion efficiency.
Standing pilot light design provides a ready
flame when heat is required.
Stainless steel front, door and galvanized
steel sides and back.
CONTROLS
Thermostat maintains selected temperature
automatically between 200°F (93°C) and 400°F
(190°C).
Integrated gas control valve acts as a manual
and pilot valve, automatic pilot valve, gas filter,
pressure regulator, and automatic main valve.
Gas control valve prevents gas flow to the main
burner until pilot is established and shuts off all
gas flow automatically if the pilot flame goes out.
Temperature limit switch safely shuts off all gas
flow if the fryer temperature exceeds the upper
limit.
OPERATIONS
Front 1-1/4" NPT drain valve, for quick draining
OPTIONS & ACCESSORIES
(AT ADDITIONAL COST)
6” (15.2 cm) Adjustable casters
Tank Cover
MagiKitch’n • P.O. Box 501, Concord, NH 03302-0501 • 509 Route 3A, Bow, NH 03304
603-225-6684 • FAX: 603-225-8497 • www.magikitch’n.com
L10-279 Rev 1 01/07 Printed in the USA
Page 2
Model MK62S Tube Fired Gas Fryer
Model MK62S Tube Fired Gas Fryer
INDIVIDUAL FRYER SPECIFICATIONS
Frying Area
18 x 18 in
(45.7 x 45.7 cm)
Cook Depth
3-1/4 - 5 in
(8.3 - 12.7cm)
Oil Capacity
65 - 80 Lbs
(29.4 - 36.3 kg)
Gas Input Rate / Hr
150,000 BTUs
(44 kW) (158 MJ)
Burner Pressure Nat
4" W.C.
(10 mbars / 1 kPa)
FRYER SHIPPING INFORMATION (Approximate)
Shipping Crate Size H x W x LShipping Weight
58 x 22 x 44 in (147.3 x 55.8 x 111.7 cm) 226 Lbs (102.5 kg)
CLEARANCES
Front min.
30"
(76.2 cm)
Floor min. Combustible material Non-Combustible material Fryer Flue Area
6"
(15.25 cm)
Sides min. Rear min.
6" (15.2cm) 6" (15.2cm) 0" 0"
Sides min. Rear min.
Do not block / restrict flue gases from flowing into hood or
install vent hood drains over the flue.
SHORT FORM SPECIFICATION
Provide MK62S tube-fired gas fryer. Fryer shall have an atmospheric burner system combined with five stainless steel tubes
utilizing high temperature alloy stainless steel baffles. Fryer shall have a deep cool zone; minimum 20% of total oil capacity.
Fryer cooking area shall be 18" x 18" (45.7 x 45.7 cm) with a cooking depth of 3 1/4 - 5" (8.3 - 12.7 cm). Heat transfer area
shall be a minimum of 700 square inches (4516 sq cm).
TYPICAL APPLICATION
Frying a wide variety of foods in a limited amount of space. Frying that requires a medium volume production rate.
Burner Pressure LP
10" W.C.
(25 mbars / 2.4 kPa)
Shipping Cube
3
(0.9 m3 )
32.5 ft
MagiKitch’n • P.O. Box 501, Concord, NH 03302-0501 • 509 Route 3A, Bow, NH 03304
We reserve the right to change specifications without notice and without incurring any obligation for equipment previously or subsequently sold
603-225-6684 • FAX: 603-225-8497 • www.magikitch’n.com L10-279 Rev 1 01/07 Printed in the USA
Loading...