MagicFX 0305 Base Plate II User Manual [EN]

USER AND INSTALLATION MANUAL
ENGLISH
BASEPLATE II.
PART01575
rev 01-00
DISCLAIMER
WARNING
© 2018 MAGICFX All rights reserved.
Nothing from this publication may be copied, reproduced and/or published by means of printing, photocopying or by any other means, without the prior written approval of MAGIC FX.
MAGIC FX reserves the right to modify specications stated in this manual.
®
TRADEMARKS
Any brand names mentioned in this manual are registered trademarks of their respective owners.
LIABILITY
MAGIC FX accepts no liability for claims from third parties arising from unauthorised use, use other than that stated in this manual, and use other than in accordance with the General Conditions registered at the Chamber of Commerce.
Refer further to the General Conditions. These are available on request, free of charge.
Although considerable care has been taken to ensure a correct and suitably comprehensive description of all relevant components, the manual may nonetheless contain errors and inaccuracies.
Should you detect any errors or inaccuracies in the manual, we would be grateful if you would inform us. This helps us to further improve our documentation.
2 MAGICFX® BASEPLATE II — User and Installation Manual
TABLE OF CONTENTS
Disclaimer 2 Trademarks 2 Liability 2 Foreword 4 Language 4 Revision table 4
1 Meet the MAGICFX® BASEPLATE II! 5
1.1 MAGICFX® BASEPLATE II 5
1.2 Technical data 6
1.3 Productidentication 6
1.4 Congurations 7
1.5 Includedfasteners 7
1.6 MAGICFX® CO2JET II 8
1.7 MAGICFX® CO2JET DMX 8
1.8 MAGICFX® POWERSHOT II 9
1.9 MAGICFX® PSYCO2JET 9
1.10 MAGICFX® SPARXTAR 10
1.11 TRUSS 10
1.12 Generic 11
2 Mountsafely! 12
2.1 Generalsafetyrules 12
2.2 Rigging 12
2.3 Safetysymbols 12
2.4 Precautionsforuse 13
3 Let’smount! 14
3.1 Mount 4 MAGICFX® POWERSHOT II on a TRUSS 14
4 Troubleshooting 17
MAGICFX® BASEPLATE II — User and Installation Manual 3
FOREWORD
Congratulations! You have bought a great new product from MAGIC FX.
This manual contains all information required for the intended use of the equipment. Deviation from the described intended use can result in a hazardous situation and/or property damage.
This manual includes notes and warnings on safe operation of the equipment. These notes and warnings are accompanied by the following icons. Read them attentively!
Indicates a hazardous situation that, if not avoided, will result in
DANGER
death or serious injury. This signal word is to be limited to the most extreme situations.
WARNING
CAUTION
NOTICE
Indicates a hazardous situation that, if not avoided, could result in death or serious injury.
Indicates a hazardous situation that, if not avoided, could result in minor or moderate injury.
Indicates information considered important, but not hazard­related (e.g. messages relating to property damage).
LANGUAGE
This document contains the original instructions in English. In case you require other languages please contact MAGIC FX.
REVISION TABLE
Documentnr Revision Date Description Authoredby Checkedby
PART01575 01-00 31-7-2018 Initial release SdO TvA
4 MAGICFX® BASEPLATE II — User and Installation Manual
1 MEET THE MAGICFX® BASEPLATE II!
The MAGICFX® BASEPLATE II is a heavy plate for mounting several congurations of MAGICFX® products. Fasteners for mounting MAGICFX® products on the MAGICFX® BASEPLATE II are included.
The MAGICFX® BASEPLATE II can be placed with its rubber foots on a stage and is equipped with four holes for mounting to a truss. Furthermore the MAGICFX® BASEPLATE II has a handle for transportation.
1.1 MAGICFX® BASEPLATE II
MAGICFX® BASEPLATE II
MAGICFX® BASEPLATE II — User and Installation Manual 5
1.2 TECHNICAL DATA
Product Product Name
Product Code
Product Type
Main
Dimensions
Length (mm/in.)
Width (mm/in.)
Height (mm/in.)
Weight Empty weight (kg/lb.)
Package Length (mm/in.)
Width (mm/in.)
Height (mm/in.)
Packaged weight (kg/lb.)
1.3 PRODUCT IDENTIFICATION
MAGICFX® BASEPLATE II
MFX0305
ACCESSORIES
400 15.7
400 15.7
15 0.6
6.1 13.4
416 16.4
416 16.4
44 1.7
6.5 14.3
Technical data
6 MAGICFX® BASEPLATE II User and Installation Manual
Product identication
1.4 CONFIGURATIONS
Product
Quantity
1 2 3 4 Rotatable Trussmountable*
CO2JET II
CO2JET DMX
POWERSHOT II
PSYCO2JET
SPARXTAR
* Read chapter 2 for safety regulations regarding rigging and trussing.
1.5 INCLUDED FASTENERS
Product
CO2JET II
CO2JET DMX
POWERSHOT II
PSYCO2JET
SPARXTAR
TRUSS MOUNTING
M10x25
Hexagon
Head Bolt
(4pcs)
M10x35
Hexagon
Head Bolt
(2pcs)
M10x30
Washer
(4pcs)
Congurations
M12x20 Socket
Countersunk (4pcs)
Included fasteners
MAGICFX® BASEPLATE II — User and Installation Manual 7
1.6 MAGICFX® CO2JET II
1.7 MAGICFX® CO2JET DMX
8 MAGICFX® BASEPLATE II — User and Installation Manual
1.8 MAGICFX® POWERSHOT II
1.9 MAGICFX® PSYCO2JET
MAGICFX® BASEPLATE II — User and Installation Manual 9
1.10 MAGICFX® SPARXTAR
1.11 TRUSS
10 MAGICFX® BASEPLATE II — User and Installation Manual
1.12 GENERIC
MAGICFX® BASEPLATE II — User and Installation Manual 11
2 MOUNT SAFELY!
The MAGICFX® BASEPLATE II has been designed and constructed in such a manner that it can be used safely. This applies to the use, the circumstances and the regulations as described in this documentation. Reading this documentation and following the instructions are therefore necessary for everyone who is authorised to work with the MAGICFX® BASEPLATE II.
2.1 GENERAL SAFETY RULES
• Only authorised persons may carry out work with the MAGICFX® BASEPLATE II.
• Make sure that children, unauthorised people and animals do not obtain access to the MAGICFX® BASEPLATE II.
• Make sure there are no freestanding objects or objects that can be damaged by the mounted machines within the output distance.
• Do not remove any safeguards, safety caps and safety symbols.
• All required safety devices must be in good condition and function properly.
• Do not use the MAGICFX® BASEPLATE II to stabilize a truss.
Ensure sucient lighting of the surroundings.
• Keep the workplace clean.
• Refer to the manual(s) of the mounted machine(s) for safety instructions concerning the use of those machines.
2.2 RIGGING
Please follow the European and national guidelines for safe rigging and trussing.
2.3 SAFETY SYMBOLS
Symbol Meaning
Read the manual carefully before use!
12 MAGICFX® BASEPLATE II User and Installation Manual
Safety symbols
2.4 PRECAUTIONS FOR USE
Using a damaged or an improper installed baseplate can lead
WARNING
WARNING
WARNING
to death, serious injury or property damage. Always inspect the baseplate thoroughly before use.
Using a damaged or an improper mounted machine can lead to death, serious injury or property damage. Always inspect the mounted machines thoroughly before operation.
Missing or obscured safety symbols on the baseplate can lead to death or serious injury. Make sure all safety symbols are correctly in place, see section 2.3.
MAGICFX® BASEPLATE II — User and Installation Manual 13
3 LET’S MOUNT!
The steps of mounting 4 MAGICFX® POWERSHOT II on a truss is explained below. This can be used as an example for mounting other machines on the MAGICFX® BASEPLATE II.
3.1 MOUNT 4 MAGICFX® POWERSHOT II ON A TRUSS
1 Screw the truss half couplers
on to the MAGICFX® BASEPLATE II.
NOTICE
2 Flip the 4 MAGICFX®
POWERSHOT II upside down.
14 MAGICFX® BASEPLATE II User and Installation Manual
If mounting on a truss, always perform this step rst.
3 Mount the 4 MAGICFX®
POWERSHOT II rmly on the
MAGICFX® BASEPLATE II.
4 Place the MAGICFX® BASEPLATE II on a truss.
MAGICFX® BASEPLATE II — User and Installation Manual 15
5 Secure the MAGICFX® BASEPLATE II correctly on a truss with conical pins and
spring clips.
6 Inspect if the MAGICFX® BASEPLATE II is mounted rmly and secured correctly.
16 MAGICFX® BASEPLATE II — User and Installation Manual
4 TROUBLESHOOTING
Always contact MAGIC FX if any malfunctions or errors occur that cannot be solved with the instructions as described in this manual.
MAGICFX® BASEPLATE II — User and Installation Manual 17
18 MAGICFX® BASEPLATE II — User and Installation Manual
MAGICFX® BASEPLATE II — User and Installation Manual 19
WWW.MAGICFX.EU
Loading...