Magic Chef MCBL5CG User Manual

BLENDER

MCBL5CG

CAUTION:
BEFORE USE, PLEASE READ AND FOLLOW ALL IMPORTANT
SAFEGUARD, PRECAUTIONS AND OPERATING INSTRUCTIONS.

Table of Contents

Safety Instructions -------------------------------------------- 3 - 4
Part and Features ---------------------------------------------- 5

Assembling Blender

------------------------------------------ 6

2-Way Safety System ------------------------------------ 6 - 7
Operating Instructions

--------------------------------------- 7

Cleaning and Maintenance ---------------------------------- 8
Warranty -------------------------------------------------------------- 9
Spanish section --------------------------------------------------- 11 – 19

2

What You Need to Know About Safety Instructions

Warning and Important Safety Instruction appearing in this manual are not
meant to cover all possible conditions and situations that may occur.
Common sense, caution and care must be exercised when installing,
maintaining, or operating appliance.

Always contact your dealer, distributor, service agent or manufacturer
about problems or conditions you do not understand.

When using electrical appliances, basic safety precaution should always
be observed, including the f o ll owi n g:

IMPORTANT SAFEGUARDS

1) Read all instructions.

2) This appliance is for household use only. Do not use outdoors.

3) Do not use the appliance for other than its intended use.

4) Before using for the first time, check if voltage indicated on the base of the
appliance corresponds to the voltage in your home.

5) To protect against electric shock, do not immerse a main cord, a plug or a
motor housing in water or any other liquid.

6) Do not turn the power on unless the appliance is properly assembled.

7) Close supervision is necessary when any appliance is used by or near
children.

8) Do not operate any appliance with a damaged cord or plug, or after the
appliance malfunctions or has been damaged in any manner. Return
appliance to authorized service center for examination, repair or adjustment.

9) Do not touch the moving parts of the appliance when operating.

3

10) Do not use attachments or accessories not recommended or sold by the
manufacturer. They may cause fire, electric shock or injury.

11) Unplug the appliance from the outlet when not in use, assembling and
disassembling, and before cleaning. Make sure the appliance stops
completely before disassembling.

12) Do not let cord hang over edge of table or counter, or touch hot surfaces.

13) Do not place the appliance on or near a burner or a hot oven.

14) When blending hot liquids, remove centerpiece of two-piece cover.

15) Blades are sharp. Handle carefully.

16) Be certain cover is securely locked in place before operating appliance.

CAUTION: This product is equipped with a polarized plug (one blade is wider
than the other blade) as a safety feature to reduce the risk of electrical shock.
This plug will fit into a polarized outlet only one way. This is a safety feature. If
you are unable to insert the plug into the electrical outlet, try reversing the plug.
If the plug still does not fit, contact a qualified electrician.
Never use the plug with an extension cord unless the plug can be fully inserted
into the extension cord. Do not alter the plug of the appliance or any extension
cord used with this appliance. Do not attempt to defeat the safety purpose of the
polarized plug.

SAVE THESE INSTRUCTIONS

4

Parts and Feature

1 - Pouring hole cover
2 - Lid
3 - Blender Jar
4 - Blade assembly
5 - Lid safety lock
6 - Motor base
7 - Off button
8 - 10 speeds buttons

High / Low button

9 -

High position – ‘H’ for speed 6 to speed 10
Low position – ‘L’ for speed 1 to speed 5

10 - Pulse button
11 - Non-slip rubber feet

5

Assembling Blender

To use the blender, start by assembling the blender jar (3), and then place the
blender jar (3) on the motor base (6) as described below.

Assembling:

1) Put the motor base (6) on a steady and even surface

2) Place the rubber seal ring on the blade assembly (4).

3) Position the blade assembly (4) on the inside of the blender jar(3).

4) Turn it counter-clockwise to lock it tightly into position. Important: The blade
is sharp. Handle carefully.

5) Position the blender jar (3) on the motor base (6) and turn it clockwise to
lock it into position.

6) Position the lid (2) on the blender jar(3) Note: The tail of the lid should be
placed on the slot at the top of the handle as per 2-way safety system

2-Way Safety System

1) Safety lock on lid :
When lid is removed, the blender will stop operation. When positioning the
lid on the blender jar, note that the tab on the lid should be put into the slot
on the top of the handle to lock it into position.

2) Safety lock between the blender jar assembly and the motor base:
When the blender jar is detached from the motor base, the unit will not
operate. Align the arrow on the blender jar with the arrow on the motor base
of the unit. This is achieved by turning the blender jar clockwise, until the
blender jar snaps into place when the arrows are aligned.

3) With the 2-way safety system, it is only possible to operate when both the
blender jar and the lid are located in the proper position.

6