Magewell Ultra Stream HDMI Quick Start Manual
Ultra Stream HDMI
Quick Start Guide
TM
Record to mobile phone or USB 4K 4:2:0 input & loop-through 1080p60 recording & streaming Customize encoding for the main stream and sub stream
01
Brief Introducon
Record to mobile phone or USB
4K 4:2:0 input & loop-through
Customize encoding for the
main stream and sub stream
1080p60 recording & streaming
Event Recording
Online Tutorials
Game Broadcasng
Sports Broadcasng
02
Free Download
Ultra Stream App
iOS
iOS 9.0 and above
Search Ultra Stream or Magewell
in the App Store
Android
Android 5.0 and above
Scan the QR code
to download
03
Network Connecon Opon 1
W ired Ethernet Network
Plug the power cable and Ethernet cable into your encoder.
Step 1
Tap the Ultra Stream app icon on your phone.
Step 2
The LED indicators will light in rotaon as the unit boots.
Now the Ethernet indicator will be on, while all the other indicators will be pulsing slowly.
Wait for about 1 minute and the boot up will be done.
03
Network Connecon Opon 1
W ired Ethernet Network
Turn on Wi-Fi and Bluetooth on your mobile device as requested
by the app, and make it discoverable to nearby devices.
Step 3
Inialize the device following the on-screen instrucons: set the device name, and passcode.
Step 4
The wireless network your mobile device is connected to and the
wired network the encoder is connected to must be within the same
network.
Your phone and encoder must be close to each other (less than 10m apart, best within 2 m).
1
2 3
Wi-Fi
Bluetooth
Loading...