Remove all parts and hardware from box along with any plastic protective packaging.
Seat cushion
Step 1:Take out the legs and hardware package under the Cushion, then turn the chair upside do
on protective carpet.Screw in the feet (P2&P3) into the screw holes underneath the base using th
Description：Accent Chair
Description
P
P2
Impottant safety instructions：
Please carefully read all instructions assembling the chair.
For your safety and ease，assembly by two or more adults is recommended.
Keep instructions for future ues.
Pre-assembly：
Do not discard any contents until after assembly is complete to avoid accidentally discarding small parts or
hardware.
Parts List
Item QTY
P1 Chair 1
P2 Front Legs 2
P3 Back Legs 2
P4
P5
1
1
Hardware List
Item QTY
H1
Assembly Procedures:
washers (H1 ).
Description
PLASTIC
WASHER
4
Setp 2:
PERIODICALLY INSPECTED AND RE-TIGHTENED TO PREVENT DAMAGE INJURY.ALWAYS CHECK TO BE URE THAT A
Turn the assembled chair to an upright position.
Step 3：
Put the seat cushion（P4)and the back cushion(P5) on it.Assembly is complete.
Failure to follow these instructions may cause assembly errors.
ADDITIONAL NOTE ABOUT SAFETY:BOLTS MAY LOOSEN NORMAL EVERYADY USE.THEY SHOULD BE
HARDWARE IS KEPT TIGHTENED.
Your wood furniture can be cleaned using a damp soft cotton cloth to wipe it down,then wipe
Some spray and liquid furniture polishes can change the sheen(how shiny your furniture is）of t
If you plan to use a product like this to clean your furniture you should first test it in an inconsp
Use and Care instructions for
your Madison Park Signature Furniture
Thank you for your purchase
dry with a second soft cotton cloth.
part of the furniture.
Upholstery should be cleaned using a quality product intended for furniture upholstery.
It is best to not place your furniture in direct sunlight as it can fade the finish over time.
Always lift your furniture when moving it as dragging it can cause damage.
Loading...