PRTEMP140
HIGH TEMPERATURE & PRESSURE
DATA LOGGER
Features
• Operates from -20 °C to +140 °C
• Submersible (IP68)
• User Replaceable Battery
• Rugged Stainless Steel Body
• Programmable Start Time
• CE Compliant
• Software Battery Life Indicator
• 1/8 inch NPT Pressure Port
• Wrench Flats (NPT Model)
Benefits
• Simple Setup and Installation
• Minimal Long-Term Maintenance
• Compatible with 1/8 inch NPT
Adaptors and Fittings
Applications
• Autoclave Validation and Mapping
• Steam Sterilization
• Canning and Cooking Pouches
• Pressurized Process Reactors
• Beverage Production, Including
Wine and Soda
The PRTemp140 is a pressure and high temperature data logger all in
one, created specifically for use in autoclave validation, mapping
studies and pressurized processes. Featuring the familiar body
style of the 140 series of data loggers and made of rugged
stainless steel, this dual purpose device is less than 2.5 inches
in length, allowing it to fit discretely inside small spaces.
The PRTemp140 data logger downloads temperature and
pressure data simultaneously and displays the combined
results in a single graph, simplifying data collection and
analysis and eliminating unnecessary steps for the user.
This data logger is able to measure and record temperatures
from -20 °C to 140 °C, and pressure from 0 bar to 5 bar,
accommodating a wide range of applications even in the
harshest conditions.
Flush Top
NPT Top
The memory capacity on the PRTemp140 stores up to 32,700
time and date stamped readings and will retain data even if the battery becomes discharged.
The PRTemp140 utilizes the latest MadgeTech data logger software, making the entire process
from starting the device to analyzing data, efficient and easy for the user. Downloaded data can
be viewed in various formats including graphic and tabular and can also be exported to Excel® for
further analysis and calculations.
MADGETECH DATA LOGGER SOFTWARE
A
Key
A Graph View
B Tabular Data View
C Statistics
D Digital Calibration
E Copy to Excel®
B
C
E
D
6 Warner Road · Warner, NH 03278
Phone: (603) 456-2011 · Fax: (603) 456-2012
Software Features:
• Multiple graph overlay
• Statistics
• Digital calibration
• Zoom in/ zoom out
• Lethality equations (F0, PU)
• Mean Kinetic Temperature
• Full time zone support
• Data annotation
• Min./Max./Average lines
• Data table view
• Automatic report generation
• Summary view
• Multilingual
PRTEMP140 SPECIFICATIONS*
Pressure
*SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE. SPECIFIC WARRANTY REMEDY LIMITATIONS
APPLY. CALL 1-603-456-2011 OR GO TO WWW.MADGETECH.COM FOR DETAILS.
Pressure Sensor: Strain Gauge
Pressure Range: 0 bar to 5 bar
Pressure Resolution: 0.0001 bar
Calibrated Accuracy: ±0.03 bar (+20 °C to +140 °C)
Temperature
Temperature Sensor: Resistance Temperature Detector (RTD)
Temperature Range: -20 °C to +140 °C (-4 °F to +284 °F)
Temperature Resolution: 0.01 °C
Calibrated Accuracy: ±0.1 °C (+20 °C to +140 °C)
General
Start Modes:
Stop Modes:
Real Time Recording:
Memory: 32,767 readings
Password Protection:
BATTERY WARNING: WARNING: FIRE, EXPLOSION, AND SEVERE BURN HAZARD. DO NOT
SHORT CIRCUIT, CHARGE, FORCE OVER DISCHARGE, CRUSH, PENETRATE, OR INCINERATE.
BATTERY MAY LEAK OR EXPLODE IF HEATED ABOVE 150 ºC (302 ºF)
• Immediate start
• Delay start up to 18 months
in advance
Manual or Timed
(specific date and time)
May be used with PC to monitor and
record data in real time
An optional password may be
programmed into the device to
restrict access to configuration
options. Data may be read without
the password.
Reading Rate:
1 reading every second up to 1 reading
every 24 hours
Calibration: Digital calibration through software
Calibration Date: Automatically recorded within device
Memory Wrap: Yes
Data Formats:
°C, °F, °R, K, bar, mbar, PSI, inHg, mmHg, atm,
Torr, Pa, kPa, MPa
Battery Life: 2 years typical (1 minute reading rate)
Battery Type:
3.6V high-temperature lithium battery included;
user replaceable
• ±1 min/mth @ 25 °C
Time Accuracy:
• Extended Operation: ±20 mins/mth at 140 °C
(±450 ppm)
Required Interface
Package:
Operating System
Compatibility:
MadgeTech Software
Compatibility:
Operating Environment:
IFC400 or IFC406 USB docking station required
XP SP3/Vista/Windows 7/Windows 8
• Standard software version 4.2.3.0 or later
• Secure software version 4.2.2.0 or later
-20 °C to +140 °C (-4 °F to +284 °F),
0 %RH to 100 %RH, 0.002 PSIA to 100 PSIA
• Flush Top: 1.98 in x 0.97 in x 0.97 in
(50.2 mm x 24.6 mm x 24.6 mm)
Dimensions:
• NPT Top: 2.3 in x 0.97 in x 0.97 in
(58.2 mm x 24.6 mm x 24.6 mm)
Weight:
• Flush Top: 90 g (3.2 oz)
• NPT Top: 100 g (3.5 oz)
Material: 316 Stainless Steel
IP Rating: IP68
Approvals: CE
ORDERING INFORMATION
MODEL DESCRIPTION
PRTemp140-NPT High Temperature and Pressure Data Logger with NPT Port Top
PRTemp140-LVL High Temperature and Pressure Data Logger with Flush Top
IFC400 Docking station with USB cable, software and manual
IFC406 6 Port, Multiplexer docking station with USB cable, software and manual
ER1425S-HT Replacement battery for the PRTemp140
Calibration Certificate Calibration Certificate available for data logger
For Quantity Discounts call 603-456-2011 or email sales@madgetech.com
6 Warner Road · Warner, NH 03278
Phone: (603) 456-2011 · Fax: (603) 456-2012
Temperature
ASK ABOUT
OUR OTHER
DATA
LOGGERS
DOC-1298009-00 REV 1 2014.11.04
Humidity
Pressure
pH
Level
Shock
LCD Display
Pulse/Event/State
Current
Voltage
Wireless
Intrinsically Safe
Spectral Vibration
Motion