MadgeTech IFC200 Specifications

IFC200

USB DATA LOGGER
INTERFACE

Features

• Compatible With Most MadgeTech

Data Loggers

• “Plug and Play” - No Driver

Installation Required

• Blue, Green and Red LED Indicators

• Reduced noise with longer sensor

leads

IFC200 SPECIFICATIONS*

MadgeTech’s IFC200 interface cable

communicates between stand alone data

loggers and the MadgeTech software.

Through this interface, loggers can be

started, stopped or downloaded.

The IFC200 has been redesigned, and is

now “plug and play”. It can be directly connected to a computer without installing any driv-

ers. The improved IFC200 can now operate at up to 500 Volts RMS relative to the computer’s

earth ground when attached.

The IFC200 is equipped with communication LEDs, that provide a quick indication of the

device status. The blue light illuminates when the

device is plugged in and successfully recognized

by Windows. The red light flashes when data is

sent, and the green light flashes when data is re-

ceived.

Operating

Environment:

Materials: Polycarbonate Enclosure

Dimensions:

-20°C to +50°C
(-4°F to +122°F)

Enclosure: 1.9” x 0.69” x 0.32
(48.4mm x 17.5mm x 8.1mm)

Cable: 6’ included
May be used with any shielded 3.5mm
stereo cable up to 100’

ORDERING INFORMATION

MODEL DESCRIPTION

IFC200 USB Data Logger Interface

For Quantity Discounts call 603-456-2011 or email [e-mail]

LEDS: Blue and Red/Green

Blue: Illuminates when the device is plugged in and
successfully recognised by Windows.

LED Functions:

*SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE. SPECIFIC WARRANTY REMEDY LIMITA-

TIONS APPLY. CALL 1-603-456-2011 OR GO TO WWW.MADGETECH.COM FOR DETAILS.

Red: Flashes when data is sent.

Green: Flashes when data is received.

ASK ABOUT
OUR OTHER

DATA

LOGGERS

Pulse/Event/State

Spectral Vibration

Temperature

Humidity

Pressure

pH

Level

Shock

LCD Display

Current
Voltage

Wireless

Intrinsically Safe

Motion

6 Warner Road · Warner, NH 03278

Phone: [phone] · Fax: [phone]

REV 5 03.10.2017