MadgeTech HiTemp140X2 Operating Manual
Product User Guide
HiTemp140X2 Series
HiTemp140X2 Series
High Temperature Dual Probe Data Logger Series
visit our website at www.madgetech.com.
To view the full MadgeTech product line,
Product User Guide
Table of Contents
HiTemp140X2 Data Loggers
Product Overview .......................................... 2
Additional Features ........................................ 3
Installation Guide ........................................... 4
Device Operation ........................................... 4
Device Maintenance ....................................... 5
RMA Instructions ............................................. 5
General Specifications ..................................... 6
HiTemp140X2-FP Series
Product Overview ........................................... 7
Specifications .................................................. 8
HiTemp140X2-TD Series
Product Overview ........................................... 9
Specifications ................................................ 10
Troubleshooting Tips ............ Back Cover
To view the full MadgeTech product line,
visit our website at www.madgetech.com.
HiTemp140X2 Series
Product Overview
The HiTemp140X2 series of dual probe high temperature data loggers are comprised
of a stainless steel data logger body and feature either two remote temperature probes one
ambient and one remote temperature probe combination. This data logger series offers
extreme flexibility for high temperature monitoring applications.
The dual probes of the HiTemp140X2 series allow for simultaneous temperature monitoring
and are ideal for applications such as oven mapping, surface temperature monitoring,
autoclave validation, food processing, sterilization processes and much more.
The HiTemp140X2-TD data logger models feature a 2 inch rigid, fast response, transitional
diameter probe to measure ambient temperature, combined with a second stainless steel
bendable or flexible RTD probe option.
The HiTemp140X2-FP data logger models feature a 72 inch, lightweight flexible RTD probe,
combined with a second stainless steel bendable probe or a second flexible RTD probe.
The HiTemp140X2 data logger series is compatible with the latest version of the MadgeTech
Software. This allows for simple starting, stopping and downloading of collected data. Once
the readings have been downloaded to the software, it can be viewed in graphic, tabular,
and summary form for easy analysis, as well as the potential to be exported into Excel for
further calculations.
Rigid Transitional
Diameter Probe (TD)
Stainless Steel Bendable
Flexible RTD Probe (FP)
RTD Probe (PT)
2
Product User Guide
Additional Features
Submergibility
The HiTemp140X2 series is rated IP68 and is fully submersible. They can be placed in
environments up to 230 ft (70 m) of water.
Bend Radius
- The bendable probe can be bent to a 1/4 inch bend radius. The probe should not be bent
within 1 inch of either weld joint.
- The flexible probe should not be bent within 1 inch where the probe meets the logger or
less than 1 inch from the probe tip.
O-Rings
O-ring maintenance is a key factor when properly caring for the HiTemp140X2 data loggers.
The O-rings ensure a tight seal and prevent liquid from entering the inside of the device.
Please refer to the application note “O-Rings 101: Protecting Your Data”, found on the
MadgeTech website, for information on how to prevent O-ring failure.
Trigger Settings
The device can be programmed to only record based off user configured trigger settings.
1. In the Connected devices panel, select the intended device to change the settings.
2. On the Device tab, in the Information group, click Properties. Users can also right-click
on the device and select Properties in the context menu.
3. Click Trigger and configure the Trigger settings. Trigger formats are available in Window
and Two Point (bi-level) mode. Window mode allows for one range of temperature
monitoring and two point mode allows for two ranges.
Note: This product is rated for use up to 140 °C. Please heed the battery warning. The product will explode if
exposed to temperatures above 140 °C.
Temperature Channels
All HiTemp140X2 data loggers feature 2 temperature channels.
The channel number for each probe is identified on the top
of the logger as shown below. The MadgeTech Software will
list the temperature channels in sequence, listing channel 1
first and channel 2 second, under the data logger device ID as
shown to the right.
3
Loading...