3M Occupational Health and Environmental Safety Division
3M™ Macurco™ Fixed Gas Detection
Protect
& Prevent
Fixed gas detecting equipment for residential and
commercial applications.
Combustible Gas Detectors
For Homes, Furnace Rooms, Commercial Buildings, Energy Management Systems
GD-1-SPC-NG /
GD-1D GD-1S GD-2A GD-21
GD-1-SPC-PRO
Gas detector for use with
alarm systems. Available in
two calibration options: 20%
LEL Propane or 20% LEL
Methane.
• Flush or surface mount
• 12-24 VAC or VDC operation
• SPDT alarm relay
• N.C. trouble relay
Gas detector for use with alarm
systems, dual relay
output. Standard calibration
10% LEL and 25% LEL Methane.
• Flush mount
• 12-24 VAC or VDC operation
• High and low level
alarm relays
Gas detector for use with alarm
systems, or 12VDC boats,
motor homes, and alternately
fueled vehicles
(i.e. propane, hydrogen, etc.).
• Surface mount
• 12 VDC operation
• N.O. alarm relay
UL listed combustible gas
detector for use with fire and
security alarm systems.
• Flush or surface mount
• 12-24 VAC or VDC operation
• SPDT alarm relay
• N.C. trouble relay
• UL listed to UL 2075
• Alarm set point: Per UL
1484 (25% LEL)
GT-11A GT-11 4S1D-1-BR 4S1-GVC
Analog gas transducer for
use with HVAC/Building
Automation Systems.
• NEMA 1 Enclosure
• 24 VAC or VDC operation
• 1-5V or 4-20mA output
• Compatible with DVP-120
• 0 to 20% LEL range
• Color: Gray
Analog gas transducer for
use with HVAC/Building
Automation Systems.
• 24 VAC or VDC operation
• 1-5V or 4-20 mA output
• 0 to 20% LEL range
• Color: White
Combustible gas detector for
use in commercial applications
with 120 VAC operation
requirement.
• 120 VAC operation
• 85 dBA buzzer
• N.O. alarm relay
• Alarm set point: 25% LEL
natural gas (methane)
• Mounts to double gang box
• Optional 220 VAC operation
(Model: 4S1D-1-BR-220)
Gas valve controller for
propane and natural gas. Gas
valve sold separately through
HVAC or gas suppliers.
• 24 VAC operation
• 85 dBA alarm buzzer
• N.C. relay powers 24V gas
valve
• Alarm Level: 10% LEL of
propane and natural gas
• Class Two System:
low voltage operation
Easy to install stand-alone
heating gas detector for
residential use.
• 120 VAC operation
• 85 dBA buzzer
• Alarm set point: 25% LEL
natural gas (methane)
Note: Standard calibration of combustible gas detectors can detect the following gases: methane, LP, natural gas, propane, butane and gasoline vapors.
Control Panel for Fixed Gas Detectors
For Multi-Point Applications Such As Parking Garages, Warehouses, Maintenance Facilities
DVP-120 SS103-3A
Gas detection and ventilation control panel with externally visible LCD
display showing the status of each transducer and relay.
• 120 VAC operation
• Adjustable alarm settings and time delays
• Three 16 Amp, 240 VAC SPDT fan/alarm relays
• Accepts 4-20mA input from up to 12 CO, NO2 or LEL gas sensors
• Externally visible LED status indicators
• Lockable NEMA 1 type enclosure
• 24VDC drivers for external horn and strobe
• Internal buzzer, 90 dBA at 1ft
Note: nished good model numbers are the same as the part numbers for ordering purposes.
CO ventilation controller to monitor up to three (SS103-3A)
remote transducers.
• 120 VAC operation
• Adjustable alarm settings
• Three 10 Amp relays
• System status LED’s
• Sturdy electrical box enclosure
Carbon Monoxide Detectors
For Homes, Offices, Warehouses, Commercial Buildings, Enclosed Parking Garages, Vehicle Maintenance Facilities
CM-1B CM-2B CM-3 CM-15 / CM-15A
CO alarm, detector and controller for
use in commercial applications.
• Digital meter (0-250 ppm)
• 12-24 VAC or VDC operation
• Dual relays: fan (SPDT) and
alarm (N.O.)
• 85 dBA buzzer
• Fan relay actuation:
35 ppm CO after 5 min.
• Alarm relay actuation:
100 ppm CO after 30 min.
200 ppm CO after 10 min.
• Optional transformer for
120V operation (sold separately)
Analog CO transducer with solid state
sensor for use with HVAC/Building
Automation Systems.
• Digital meter (0-250ppm)
• 24 VAC or VDC operation
• 4-20mA output
• NEMA 1 enclosure
• Compatible to DVP-120
Analog CO transducer with
electrochemical sensor for use with
HVAC/Building Automation Systems.
• Digital meter (0-250ppm)
• 12-24V operation
• 4-20mA output
• NEMA 1 enclosure
• Compatible to DVP-120
• 5 Amp SPDT adjustable fan
control relay
UL listed CO detectors for use with re
and security alarm systems.
• UL 2075 listed
• Flush or surface mount
• 12-24 VAC or VDC operation
• SPDT alarm relay
• LED status display
• 85 dBA buzzer (CM-15A)
• N.C. trouble relay
• MEA Approved
CM-E1 CM-21A CM-4 CS102A
UL listed CO detector for use with re
and security alarm systems.
• UL 2075 listed
• Flush or surface mount
• 9-32 VAC or VDC operation
• SPDT alarm relay
• LED status display
• 85 dBA buzzer
• SPDT trouble re lay
• Designed to meet the NFPA®
720-2009 standard for CO sensor
functionality and sensitivity testing
CO detector and ventilation controller
for use in commercial applications.
• Status LED’s
• 12-24 VAC or VDC operation
• Dual relays: fan (SPDT) and alarm
(N.O.)
• Fan relay actuation: Selectable at 25
ppm, 35 ppm (default), 50 ppm or
100 ppm CO within 5 min.
• Alarm relay actuation:
Selectable at 100 ppm CO within 3
hours or 200 ppm CO within 10 min.
• Mounts in 4 x 4 box
Analog CO transducer for use with
SS103 Controllers or DVP-120.
• Mounts on 4 x 4 box
• 0 to 250 ppm CO range
• Analog output 1-2.9V and 4-20mA
• Status LED’s
• 12-24 VDC or VAC operations
Analog CO transducer with
electrochemical sensor for use with
SS103 controllers.
• Mounts on 4x4 box
• 0 to 250 ppm CO range
• Analog output 1-2.9V
• Status LED’s
Nitrogen Dioxide Air Quality Controllers
For Parking Garages, Warehouses,
Maintenance Facilities, Ice Skating Arenas
ND-1 ND-2 AQC-12 AQC-21
Detector and controller for detection
and ventilation of nitrogen dioxide
from diesel exhaust fumes.
• Digital meter (0-9ppm)
• 12-24 VAC or VDC operation
• Adjustable relay set points
• NEMA 1 enclosure
• SPDT fan relay
• N.O. alarm relay
Detector and controller for detection
and ventilation of nitrogen dioxide
from diesel exhaust fumes.
• Digital meter (0-9ppm)
• 12-24 VAC or VDC operation
• Adjustable relay set point
• NEMA 1 enclosure
• SPDT fan relay
• 4-20mA output (0-6ppm)
• Compatible with DVP-120
For Bathrooms, Conference Rooms, Restaurants, Lounges
Hydrocarbon detector and
ventilation controller, stand-alone or
for use with systems.
• SPDT alarm relay
• Adjustable time delay and sensitiv-
ity settings
• Detects cigarette smoke, VOCs
and many other gases
• 120 VAC operations
Hydrocarbon detector and
ventilation controller, stand-alone
or for use with systems.
• SPDT alarm relay
• Adjustable time delay and
sensitivity settings
• Detects cigarette smoke, VOCs
and many other gases.
• 12-24 VAC or VDC operation
Hydrogen Detectors Duct Mount Kit
For Areas with Forklifts, Golf Carts, Uninterruptible Power Supplies For mounting gas detectors
in ventilation ducts
HD-11 HD-12 HD-21-1-BR DMK-1
Hydrogen detector for use with
alarm control panels.
• Flush mount
• 12-24 VAC or VDC operation
• SPDT alarm relay
• Alarm relay set point: 10% LEL
Note: nished good model numbers are the same as the part numbers for ordering purposes.
™
3M
Fixed Gas Detection Field Calibration/Test Kits and Replacement Calibration Gases
Product Number Description
CME-FCK
CMS-FCK
CM15-FTK
ND-1-FCK
CME1-FTK
CME1-TH
CME1-FTG
CANN50PPM
CANN100PPM
CANN200PPM
CANN250PPM
CANN300PPM
CANN400PPM
3M™ Carbon Monoxide Field Calibration Gas Kit includes 17L 50 PPM, 17L 200 PPM, Unversial Cal Kit (Use with CM-3 and CS102A models)
3M™ Carbon Monoxide Field Calibration Gas Kit includes 17L 50 PPM, Unversial Cal Kit (Use with CM-1B, CM-2B, CM-21A, CM-4 models)
3M™ Carbon Monoxide Test Kit includes 17L 400 PPM CO, Unversial Cal Kit
3M™ Nitrogen Dioxide Field Calibration Gas Kit includes 34L 5 PPM, Regulator, Sensor Adapter Hood, Tygon Tubing™, Carry Case
3M™ Carbon Monoxide Field Verication Gas Kit includes 17L 200 PPM CO/AIR, regulator, test hood, and Tygon® tubing
3M™ Carbon Monoxide CM-E1 Test Hood
3M™ Carbon Monoxide Field Test Gas, 17L 500 PPM CO/Air, Aerosol
3M™ Carbon Monoxide Replacement Calibration Gas, 17L 50 PPM CO/AIR
3M™ Carbon Monoxide Replacement Calibration Gas, 17L 100 PPM CO/AIR
3M™ Carbon Monoxide Replacement Calibration Gas, 17L 200 PPM CO/AIR
3M™ Carbon Monoxide Replacement Calibration Gas, 17L 250 PPM CO/AIR
3M™ Carbon Monoxide Replacement Calibration Gas, 17L 300 PPM CO/AIR
3M™ Carbon Monoxide Replacement Calibration Gas, 17L 400 PPM CO/AIR
Hydrogen detector for use with
alarm control panels.
• Flush mount
• 12-24 VAC or VDC operation
• High and low alarm relays
• Alarm relay set points: 10% and
25% LEL
Hydrogen detector for use in
commercial applications with
120 VAC requirement.
• Mounts in 4 x 4 box
• 120 VAC operation
• N.O. alarm relay
• Alarm relay set point: 10% LEL
• 85 dBA buzzer
Provides means to duct mount all
standard 4 x 4 mount detectors
(gas detector purchased separately).
• Air tight enclosure
• Clear cover allows view of detector
status lights
• Enclosure size 7" x 71/8" x 41/4"
• Exhaust tube 61/2" length
3M™ Fixed Gas Detection Accessories
Product Number Description
PS-12
CMP
Occupational Health &
Environmental Safety Division
3M Center – Building 235-2W-70
St. Paul, MN 55144-1000
Sales Assistance: 1-800-328-1667
Technical Assistance: 1-800-243-4630
www. 3M.com/macurco
Please recycle. Printed in U.S.A.
© 2009 3M Company. All rights reserved.
3M™ Plug-in Transformer, 120VAC to 12VDC
3M™ 12V Transformer for CM-1B Detector
3M and Macurco are trademarks
of 3M Company.
Tygon is a registered trademark of
Saint-Gobain Corporation.
NFPA is a trademark of National Fire
Protection Association.
70-0714-2836-4 Rev A ( 39.25)ii
WARNING
This instrument helps monitor for the presence and concentration level of certain specified
airborne gases. Misuse may produce an inaccurate reading which means that higher levels
of the gas being monitored may be present and could result in overexposure and cause
sickness or death.
Each person using this equipment must read and understand the information in the User
Instructions before use. Use of this equipment by untrained or unqualified persons, or use
that is not in accordance with the User Instructions, may adversely affect product performance and result in sickness or death. For proper use, see supervisor or User Instructions,
or call 3M OH&ESD Technical Service in the U.S.A. at 1-800-243-4630. In Canada, call at
1-800-267-4414.
Loading...