Macurco™
Horn and Strobe
Blue
(HS-B)
Horn and Strobe Series
Red Clear
(HS-C) (HS-R)
Amber
(HS-A) (HS-G)
Green
Macurco Horn and Strobe Series
The Macurco Horn and Strobe series is designed for spaces where distinctive visual or audible signal is required.
These devices use low current to provide a high decibel output, and can be easily seen and heard from afar. The
Horn and Strobe works well with Macurco products including the DVP-120, DVP-120M control panels and the
Macurco 6 & 12 Series detectors. This notification device can be flush or surface mounted on a double gang box.
Features and Specifications
• Flexible optic design to meet or exceed the light output on vertical/horizontal dispersion
• Strobe Candela: Adjustable at 15, 30, 75 or 110cd
• Adjustable two audible tone settings: Continuous (high/low) / Temporal 4 (high/low)
• Size: 5 1/2 x 4 3/4 x 2 in. (14 x 12 x 5 cm)
• 20ms pulse duration
• Low Current Draw
• High power cool white LED is used
• Strobe flash rate: 1 flash per second
• Nominal Voltage: Regulated 24VDC
• Operating Voltage: 16 to 33 VDC
• Operating Environment: 32°F to 120°F (0°C to 49°C). 10 to 93% RH
• Works with Macurco DVP-120 & DVP-120M control panels
• Works with Macurco 6 & 12 Series detectors
*Based on test result with clear lens cover*
Sioux Falls, SD – Phone: 1-877-367-7891 – Email: info@aerionicsinc.com – www.macurco.com
Horn and Strobe Specifications
Current
DC
FWR
Continuous
Temporal 4
*Macurco reserves the right to change any specifications without notice. *Refer to local codes for appropriate mounting heights
Sound Pattern
High Continuous
High Temporal 4
Low Continuous
Low Temporal 4
High Continuous
High Temporal 4
Low Continuous
Low Temporal 4
Reveberant dBA Per UL 464
Volume
Horn Strobe (16-33Volts)Pattern
High
Low
High
Low
Current Draw (A)
Strobe Candela Settings (cd)
16-33 Volts
15 30 75 110
0.087
0.080
0.074
0.075
0.115
0.113
0.113
0.094
0.094
0.083
0.080
0.080
0.137
0.122
0.117
0.117
0.122
0.108
0.110
0.106
0.165
0.154
0.160
0.132
Sound Output (dBA)
Anechoic dBA
91.4
86.6
87.5
82.2
Continuous
Temporal 4
Volume
High
Low
High
Low
Horn Strobe (16-33Volts)Pattern
92.0
87.7
92.0
87.2
0.133
0.126
0.125
0.124
0.186
0.179
0.175
0.160
*If needed to synchronize multiple Horn/Strobes please contact technical support*
Power
Macurco
24VDC
Transformer
-
External Horn/Strobe
24VDC
+
TYPICAL CONNECTION TO
MACURCO DVP-120 CONTROL PANEL
+
-
Macurco 6-Series
ALARM
RELAY
N.C.
or
POWER
12/24VDC
SPDT fan
RELAY
TYPICAL CONNECTION TO
MACURCO 6-SERIES DETECTOR
N.O.
+-
A
B
N.O.
COM
N.C.
Macurco
External Horn/Strobe
Exhaust Fans
Coil
Coil
STARTER RELAYS
120VAC COILS
Main Fan Power
Transducer
power
8 7 6 5 4 3 2 1
24 V RET
MACURCO™ DVP-120
DETECTION AND VENTILATION
CONTROL PANEL
Panel Power
120/250 VAC
Gnd
LN
1 13 3 4 5 6 7 8 92
4-20mA
output
– +
-1 LOOP
Transducer
4-20mA
output
power
– +
-1 LOOP
+24 VDC
24 V RET
+1 LOOP
Relay 1
N.C.
N.O.
COM
+1 LOOP
- Strobe
+ Strobe
- Horn
+ Horn
Relay 2 Relay 3
N.C.
N.O.
COM
+24 VDC
N.C.
24VDC
24VDC
ALARM
N.O.
COM
© Aerionics 2017. All rights reserved.
Macurco is a trademark of Aerionics, Inc.