Macurco DVP-120B, DVP-120C Quick Start Guide

Quick Start Guide for Adding Sensor to Zone: DVP-120 with 3 CO and 3 NO2 Detectors

Technical Questions? Call or Email Macurco | Phone: [phone] | Email: [e-mail] Rev. 1.1

Adding CO Sensors to A Zone:

Press Menu

Button Once

Press Right

Arrow Once

Adding NO2Sensors To A Zone:

Press Menu

Button Once

Press Right

Arrow Once

Press Down

Arrow Twice

Press UP

Arrow Twice

Add All CO

Sensors

Press Menu

Once

Press Right

Arrow Once

Press Down

Arrow Twice

Press Down

Arrow Twice

Press Right

Arrow Once

Press Up

Arrow Once

Add All NO

Sensors

2

Press Menu

Button Twice

Technical Questions? Call or Email Macurco | Phone: [phone] | Email: [e-mail] Rev. 1.1

Quick Start Guide for Testing Sensor Functionality: DVP-120 with 3 CO and 3 NO2 Detectors

Press Menu

Button Once

Press Down

Arrow Three

Times

Press Right

Arrow Once

Press UP

Arrow Twice

Press 0 and

(Default 1234)

Press 0 Four

Times

Press Menu

Twice

Press Menu To

Press Enter Once

Press Menu To

Show 42t

Sensors In

Remove the Startup Delay On Relays:

Run 420mA Current Loop Test:

Show tSt then

Enter Your

Password

Press Right Arrow Once and Up Arrow Twice to

Change Settings For Relay 2, Repeat For Relay 3.

Press Enter

To Run Test

Repeat For

All Zones