Macurco CM-E1-IAK-10, CM-E1-IAK User Manual

MACURCO FIXED GAS DETECTION
PRODUCTS LIMITED WARRANTY

Macurco™ CME1-IAK

Installation Instructions

CM-E1 Adaptor Kit: 2-Gang to Single­Gang Adaptor Plate Kit (CM-15/15A to
CM-E1 Conversion Kit)

Contents of this kit: 2 – 6-32 x 1/2”
Machine Screws, 4 – 6-32 x 1” machine
screws, 1 – CM-E1 Adaptor Plate, 6.5 X

4.5 X 0.25 in. (16.5 x 11.4 x 0.64 cm)

Please refer to the CM-E1 User Instructions
for addition installation information and
warnings

Macurco warrants this kit will be free from
defective materials and workmanship for a
period of two (2) years from date of
manufacture provided it is maintained and
used in accordance with Macurco instructions
and/or recommendations. If any component
becomes defective during the warranty
period, it will be replaced or repaired free of
charge, if the unit is returned in accordance
with the instructions below. This warranty
does not apply to units that have been altered
or had repair attempted, or that have been
subjected to abuse, accidental or otherwise.
The above warranty is in lieu of all other
express warranties, obligations or liabilities.
THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR
PARTICULAR PURPOSE ARE LIMITED TO
A PERIOD OF TWO (2) YEARS FROM THE
PURCHASE DATE. Macurco shall not be
liable for any incidental or consequential
damages for breach of this or any other
warranty, express or implied, arising out of or
related to the use of said gas detector.
Manufacturer or its agent’s liability shall be
limited to replacement or repair as set forth
above. Buyer’s sole and exclusive remedies
are return of the goods and repayment of the
price, or repair and replacement of non­conforming goods or parts.

Manufactured by Aerionics, Inc.
Sioux Falls, SD
Email: [e-mail]
Phone: [phone]
Rev 09.24.2014

© Aerionics 2014. All rights reserved.
Macurco is a trademark of Aerionics, Inc.

1

A. 1 - CM-E1 Detector
B. 2 – 6-32 x 1/2” Machine Screws
C. 1 – CM-E1 Wall mounting mid-plate
D. 4 – 6-32 x 1” machine screws
E. 1 – CM-E1 Adaptor Plate
F. 1 – “2-Gang” Electrical Box

A. 1 - CM-E1 Detector
B. 2 – 6-32 x 1/2” Machine Screws
C. 1 – CM-E1 Wall mounting mid-plate
D. 4 – 6-32 x 1” machine screws
E. 1 – CM-E1 Adaptor Plate
F. 1 – 2 gang Switch Mounting Plate.
G. 1 – “4x4” Electrical Box

2