Macsense Connectivity Media Player none User Manual

USER GUIDE (BOX)
User Manual
Table of Contents
1. Introduction................................................................................................................1
1.2. Features...........................................................................................................1
1.3. Notice..............................................................................................................2
1.4. Check List.......................................................................................................2
2. Playing System...........................................................................................................4
2.1. Install Battery in the Remote Control.............................................................4
2.2. To Plug in and Switch on................................................................................4
2.3. To Insert Cards................................................................................................4
2.4. Remote controller pad Instruction ..................................................................5
2.5 Appearance.......................................................................................................6
2.6. Operations for Media Player playback (** means default value)...................6
2.7 T o Take out the cards .....................................................................................13
3. Troubleshooting.......................................................................................................13
3.1 Known Issues.................................................................................................15
ii
User Manual
1. Introduction
1.1. About the Product
The new 6-in-1 media player enhances your media presentation or advertising to be more convenient and brings the immediate enjoyment and entertainment to your life. The compact, dual slot design allows Compact Flash*1 or IBM Micro drive to work concurrently with the Smart Media, Memory Stick, and Multimedia Card/Secure Digital card.
1.2. Features
Media player feature:
MPC110 MPC200
z Credit Card Sty le Remote Controller:
z Playable Format: MPEG1/2/4, JPEG, MP3
Type Support Format Picture JPEG
Baseline JPEG: maximum resolution is 5120*3840 Progressive JPEG: maximum resolution is 2048*1536
Audio
Video MPEG1 (*.mpg, *.dat)
MPEG1-Audio-Layer1 MPEG1-Audio-Layer2 MPEG1-Audio-Layer3 (MP3)
1
The Compact Flash card must be Removable Type.
1
User Manual
MPEG2 (*.vob, *.mpg)
Support Format
Video Data rate VGA*2 (MPC200 only) NTSC PAL Audio
MPEG4
DivX3.11/4.x/5.x (*.avi) Xvid MPEG4 MS MPEG4 V2/V3(*.avi)
1.0-10.0 Mbit/sec 640*480 60Hz 720*480 or 704*48029.97fps interlaced 720*576 or 704*57625fps interlaced MPEG1-Audio-Layer1 MPEG1-Audio-Layer2 MPEG1-Audio-Layer3 (MP3)
Note : The AC3/AAC-audio support is optional. When it is not enabled, this media player will only play video (no sounds) of the DVD (*.vob) or MPEG2 file contains AC3/AAC-audio. Besides, We strongly suggest you use CF card as media storage when playback MPEG2 video.
Note: We attached “How to get codec Information” in manual CD for your reference.
z Storage Capacity: Compact Flash card, IBM Micro Drive, SM/ MMC/ SD/ MS card z Playback Functions: Play, Stop, Pause, Repeat, Previous/Next Track, Mute, Rotate,
Interval Time, Play List and Media Cla s sification
z Audio: Stereo output 2W z Environmental: Operating temperature: 0 C to 50 C; Relative humidity: 5%-95%,
non-condensing
1.3. Notice
z Do not use abrasive cleaners, waxes or solvents for cleaning, use only a dry or damp,
soft cloth.
z Use only with a high quality, safety-approved, AC/DC powe r adapter.
1.4. Check List
Before using this media player , please make sure that all the items listed below are present in your package
Accessory Quantity Media Player unit 1 DC Adapter 1 AV-RCA Cable 1 S-Video Cable 1 Audio Cable 1 Remote Control with 3V battery 1
2
You can switch between Video and VGA output by pressing the latch switch next to VGA connector.
Note that you must reboot the MPC device after output switch.
2
User Manual
User Manual CD 1 If any item is missed or damaged, please contact your dealer immediately.
3
User Manual
2. Playing System
2.1. Install Battery in the Remote Control
Insert the battery and match the (+) and (-) on battery to the marks inside the battery compartment.
First-time use:
Remember to remove the insulating mylar piece form the battery.
Service life of battery:
1. The battery normally last for about one year although this depends on how often and for
what operations the remote control is used.
2. If the remote control unit fails to work even then it’s operated near the player, please
replace the battery.
3. Use a 3V lithium battery.
2.2. To Plug in and Switch on
1. Connect the power cord to the AC adapt er.
2. Plug the power connector into the DC IN jack on the rear of the Media Player.
3. Plug the other end of the power cord into a wall power outlet.
z The supplied AD adapter is compatible with 100~240V AC power so that it can be
used almost anywhere in the world (thought you may need a plug adapter).
4. You can press
again can switch back on.
5. Please connect this Media Player to power and connect it to outer equipments.
Note: If connect it to outer equipment:
Press on the power button of the TV set, and select “video” or “S-video” as the TV input. Press on the power button of the stereo system if the Media Player has been connected
on the remote control to put the Media Player into standby. Pressing
to a stereo system.
Push the AV/S-video out/in slide switch to AV/S-video out.
2.3. To Insert Cards
Push the card slide into Media Player connector. This Media Player supports 6 types of flash memory card:
4
Loading...
+ 11 hidden pages