MacroSystem Deluxe-Titler 3D User Manual

User manual Deluxe-Titler 3D
for SMART EDIT
Legal notices
To avoid making mistakes during operation, we recommend that you carefully follow the instructions provided in this manual. We have taken a great deal of care whilst programming and checking this software. Nevertheless, since it is not possible to guarantee totally error-free software applications in all environments and at any time, we unfortunately cannot rule out the possibility that some errors may have crept in.
MacroSystem Digital Video AG and its dealers therefore do not guarantee fault-free use of the product or complete awlessness of the product.
We will remedy any errors in the program and supply the affected customers with the new software free of charge, if possible. Warranty claims for defects shall expire in 24 months in the case of newly manufactured items. This shall not apply insofar as the law prescribes otherwise and in cases involving injury to life, limb or health, in the case of intentional or grossly negligent violation of duty on the part of the supplier and in the case of malicious silence with regard to a defect. The customer shall report defects to the supplier immediately in writing. Claims for reimbursement of expenses for error tracing shall be honoured only after prior consultation with MacroSystem Digital Video AG management staff. Any other claims asserted by the customer for any expense(s) required for the purpose of subsequent performance, in particular transport, travelling, work and material costs shall be excluded. However, this shall not apply to claims for reasons other than newly determined software defects.
Warranty claims shall not apply in the case of only insignicant deviation from the agreed quality, for only insignicant impairment of the usefulness, in the case of natural wear or damage which may occur after passage of the risk due to improper or careless handling, excessive use, unsuitable operating materials or which have occurred due to other special external inuences not provided for in accordance with the terms of the agreement. In the event that improper modications or repair work is performed by the customer or any third party, then any warranty claims for defects shall also be null and void for these and other consequences.
We do not, however, accept any liability for loss of data/time or any consequential damages that may occur as a result, particularly because we have no inuence over correct software installation and operation by the customer. MacroSystem Digital Video AG and its dealers therefore cannot be held liable for any defects or unintentional damage in connection with the installation or use of the Deluxe-Titler 3D software.
Claims by the customer to compensation in damages and/or reimbursement of expenses shall thus be excluded, in particular because of violation of contractual obligations and due to unlawful acts. However, this shall not apply insofar as peremptory liability is involved, e.g. in accordance with product liability law, in cases of intention, gross negligence, because of injury to life, limb or health or because of violation of substantial contract obligations. However, any claims to damages for violation of substantial contract obligations shall be limited to conventional foreseeable damage insofar as intention or gross negligence is not involved or liability due to injury to life, limb or health. A shift of the burden of proof to the disadvantage of the customer shall not be connected with the above regulations.
Neither MacroSystem Digital Video AG nor its dealers are responsible for any damages resulting either directly or indirectly through the use of the software or the operating instructions. This is particularly the cause for prot loss and reimbursement of expense. Any implied guarantee is totally out of the question, including guarantee of suitability of the software or operating instructions for a particular purpose.
Please therefore ensure that you backup your video footage before using the device. We recommend that you do not delete the video footage and that you create a backup on DV tape beforehand.
Since it is possible that changes have been made to the software after the manual was printed, the functions shown and described in this manual might differ from the software.
Contents
Page
1. General information.......................................................................................... 5
2. The program Deluxe-Titler 3D.......................................................................... 5
3. Installation / Starting the program................................................................... 6
4. Operation ........................................................................................................... 6
4.1 Enter Text............................................................................................... 6
4.2 3D style .................................................................................................. 8
4.3 Fixed motion ......................................................................................... 9
4.4 Free motion ........................................................................................... 10
4.4.1 Edit key point Menu........................................................................... 11
5. Application examples ....................................................................................... 12
5.1 Fixed motion ......................................................................................... 12
5.2 Free motion ........................................................................................... 14
1. General information
Thank you for buying Deluxe-Titler 3D from your
dealer.
We appreciate your condence in us and hope
that this product will meet your expectations.
Phone Support
If you have special technical questions, you can call our technical support hotline:
(Germany) Monday -Thursday from 10.00 to 17.00 hours Friday 10.00 to 16.00 hours +49 (0)2335/960-112
These instructions will explain the operation of
the Deluxe-Titler 3D.
We shall be happy to help you with questions
and suggestions for improvements.
For this purpose please contact us at the
following addresses:
Address
MacroSystem Digital Video AG Postfach 020240 58290 Wetter Germany
MacroSystem US 5485 Conestoga Court Boulder, Colorado USA 80301
Phone
0 +49 (0)2335/960-0 (Germany) 303-440-5311 (North America)
(North America) Monday - Friday 9a.m. - 5p.m. (Mountain Stan­dard Time) 303-801-1010
Outside of these times you can email or fax us. Messages received in this way are handled du­ring business hours.
E-Mail Support
support@macrosystem.de (Germany) aviosupport@macrosystem.us (North America) kronsupport@macrosystem.us (N.A.) prestigesupport@macrosystem.us (N .A.)
Fax Support
+49 (0)2335/960-110 (Germany) 303-801-1058 (North America)
Please have the serial number of your machine
or your customer number ready whenever you
contact us.
E-Mail
info@macrosystem.de (Germany) info@macrosystem.us (North America)
Fax
0 +49 (0)2335/960-100 (Germany) 303-440-5322 (North America)
Up-to-date information on MacroSystem pro­ducts and our sales department can be found on the Internet.
Please visit our Website:
http://www.macrosystem.de (Germany) http://www.macrosystem.us (North America)
2. The program Deluxe-Titler 3D
Deluxe Titler 3D is a title extension for your
system that you can use to create sophisticated
three-dimensional texts which can move around
freely in space. You can create impressive loop
the loops, make letters y towards the viewer
and create other rotational effects. The text
design is based on the font packages installed
on your system and allows you to make changes
to many new settings such as light sources and
3D effect intensity. The path that the text moves
along can be modied quickly and by changing
just a few parameters using the preset Fixed
Motion mode or you can customize it completely
yourself using the Free Motion mode.
Deluxe Titler 3D has its own text input function
that is separate from the text input function that
comes with SMART EDIT.
You can of course also connect an external
keyboard to enter your text such as the
separately available Power Key option that is
compatible with SMART EDIT.
3. Installation / Starting the program
In order to install the Deluxe Titler 3D software,
you will need at least version 2.5 of the SMART
EDIT system software. Leave your system
switched on and, in the System settings menu,
press the Install product button to open the
corresponding window. If you are installing
from a SmartMedia card, insert it into the
drive. When you insert the card, make sure the
gold-colored contacts are facing downwards
and the beveled corner is at the front left, i.e.
pointing towards the device. If the Deluxe Titler
3D software is supplied on a CD/DVD and your
system is equipped with a DVD drive and the
DVD-Arabesk software, you should open the
drive tray and insert the CD/DVD into the DVD
burner. If you are installing from a CD/DVD,
you might hear clearly audible sounds coming
from the drive – this indicates that the system is
reading the CD/DVD. In a moment you will see
the Deluxe Titler 3D software listed in the Install
product window. Select it from the list and click
on Activate.
After a short time a numerical keypad appears.
You can use it to enter the license code that you
purchased from your dealer. A message will
then inform you that the installation process
has completed. You can now take out the
SmartMedia card or CD/DVD.
If you are using version 3.1 or higher of the
SMART EDIT software, click on the Demo button
in the numerical code window.
You will notice that the word Demo has
appeared after the program name. Conrm with
Ok and then take out the SmartMedia card or
CD/DVD.
Deluxe Titler 3D is now installed as a demo
version.
This demo version allows you to use all the
functions, however, the word “Demo” will be
displayed over the effect after the calculations
have been completed.
You will now see the Deluxe Titler 3D program
sorted alphabetically in the list of title effects in
the Titling menu.
Insert the desired video scene (or a blank scene)
into the storyboard, select Deluxe Titler 3D
and click on Insert so that the effect is placed
over the scene. Afterwards, make the changes
that you want to the Titler settings in the effect
options that are described in the next chapter.
Changes can only be made properly to all the
settings if the title effect has been inserted into
the storyboard.
4. Operation
This chapter will explain how to operate Deluxe
Titler 3D using the various buttons and controls.
If you have selected Deluxe Titler 3D from the
title effects you will see several effect options on
the right-hand side.
If you wan to install Deluxe Titler 3D as a demo
version, select it from the list and click on
Activate.
If you are using version 2.5 or higher of the
SMART EDIT software, click on Cancel in the
numerical code window that subsequently
appears.
4.1 Enter text
Since Deluxe Titler 3D does not use the usual
function provided by the SMART EDIT titler for
entering text, you will see the program‘s own
Loading...
+ 12 hidden pages