Macromatic TD-7 SERIES Data Sheet

TD-7 SERIES TIME RANGER

Application Data

Voltage Tolerance:

AC Operation: +10/-15% of nominal at 50/60 Hz.
DC Operation: +10/-15% of nominal.

Load (Burden):

3 VA

Setting Accuracy:
Constant Voltage & Temperature w/i specif cations:

+0.1% of set time or +50ms, whichever is greater

For Variable Voltage & Temperature w/i specif cations:

+1% of set time or +50ms, whichever is greater

Repeat Accuracy:
Constant Voltage & Temperature w/i specif cations:

+0.1% of set time or +0.02 seconds, whichever is greater

For Variable Voltage & Temperature w/i specif cations:

+1% of set time or +0.02 seconds, whichever is greater

Reset Time:

On Delay/Interval/Flasher: 0.1 Seconds
Functions with Control Switches: 0.04 Seconds

Start-up Time:

(Time from when power is applied until unit is timing)

0.05 Seconds for all units

Maintain Function Time:

(Time unit continues to operate after power is removed)

0.01 Seconds for all units

Temperature: Operating: -28
Storage: -40

o

to 65oC (-18o to 149oF)

o

to 85oC (-40o to 185oF)

TM

Output Contacts:

DPDT 10A @ 240V AC/30V DC,
1/2HP @ 120/240V AC (N.O.), 1/3HP @ 120/240V AC (N.C.)
B300 & R300; AC15 & DC13

Life:

Mechanical: 10,000,000 operations
Full Load: 100,000 operations

Compatibility:

Using a solid state switch to initiate the time sequence is
acceptable.

Initiating Units with Control Switch Triggers:

iming sequence must be initiated only after input voltage is

T
applied to unit. Minimum required trigger switch closure time is

0.1 seconds.

LED:

Red LED. Refer to instruction sheet provided with product to
determine code for relay & timing status.

Approvals:

File #E109466

File #LR45565

Low Voltage &

EMC Directives

EN60947-1, EN60947-5-1

with

appropriate

socket

File #E109466

time delay relays | plug-in

Insulation Voltage: 2,000 volts

Dimensions

2.4

(60)

1.7

(43)

2.9

(74)

3.0

(77)

All Dimensions in

Inches (Millimeters)

39