M A COM manufacturer of RF 2035-6369-00, 2035-6368-00, 2035-6367-00, 2035-6366-00, 2035-6365-00 Datasheet

M/A-COM Division of AMP Incorporated ■ North America: Tel. [phone], Fax [phone] ■ Asia/Pacific: Tel. [phone], Fax [phone]

■ Europe: Tel. [phone], Fax [phone]

www.macom.com AMP and Connecting at a Higher Level are trademarks.

Specifications subject to change without notice.

5-12

V3.00

3 dB Hybrid Couplers

203X Series

Features

● 90° Quadrature Phase

● Frequency Range: .06 to 18 GHz

● Temperature Range: -65° to +125°C

● Meets MIL-E-5400 Environments

● Non-crossover Versions Available

Description

3dB quadrature mini-hybrids are the ultimate in compact,
rugged high stress environment components. The
crossover feature of the location of both outputs on one
side allows simplicity in system or subsystem design.
Multi-octave coverage of the complete frequency spec­trum, along with high isolation performance, qualifies
them as an asset to any system.

All dimensions are ± .020 except mounting diameters

(± .005) and mounting hole location (± .010).

90° Crossover Electrical Specifications

90° Crossover Mechanical Specifications

M/A-COM Division of AMP Incorporated ■ North America: Tel. [phone], Fax [phone] ■ Asia/Pacific: Tel. [phone], Fax [phone]

■ Europe: Tel. [phone], Fax [phone]

www.macom.com AMP and Connecting at a Higher Level are trademarks.

Specifications subject to change without notice.

5-13

3 dB Hybrid Couplers 203X Series

V3.00

All dimensions are ± .020 except mounting diameters (± .005)

and mounting hole location (± .010).

Features

Air Dielectric
Non-Crossover Design
90° Quadrature Phase
Frequency Range: 1.0 to 18 GHz
Temperature Range: -50° to +110°C
Meets MIL-E-5400 and MIL-E-16400 Environments
MIL-C-15370/8 Equivalent

Description

These 3dB coaxial hybrids are ultra-compact. A signal
applied into any terminal appears at both outputs with
one-half the amplitude and shifted 90 degrees out of
phase.

The units mount four SMA jack, low VSWR connectors.
These couplers may be used in mixers, duplexers and
other applications requiring equal power division.

●

●

●

●

●

●

●

90° Non-Crossover Electrical Specifications

90° Non-Crossover Mechanical Specifications