M A COM PD10-0041-S Datasheet

Two-Way In-Phase Pow er Divider

0.4 - 400 MHz

PD10-0041-S

Features

• Space Qualified version of DS-113

• Designed to meet the Stringent Reliability Standards of

Space Hardware

• 50 Ohms Nominal Impedance

• Three Decade Bandwidth

• Low Loss: -0.25 Typ.

Description

M/A-COM’s PD10-0041-S is a Two-Way In-Phase Power
Divider designed to operate between 400 KHz and 400 MHz

Absolute Maximum Ratings1

Parameter Absolute Maximum

Max. Input Power 1 Watt Max.
Operating Temperature -30°C to +85°C
Storage Temperature -65°C to +125°C

1. Operation of this device above any one of these parameters may
cause permanent damage.

Electrical Specifications, TA = +25°C

FP-2

PIN 0.015 DIA ±0.005

(0.38 ±0.13)

8 PLACES

1 2 3 4

5 6 7 8

0.080 (2.0)

0.100 (2.5)

0.250 (6.3)

0.350 (8.9)

0.051

(12.9 ±0.5))

Unless Otherwise Noted: .xxx = ±0.010 (.xx = ±0.25)

WEIGHT (APPROX.): 0.09 OUNCES 2.5 GRAMS

Dimensions in ( ) are in mm.

.xx = ±0.02 (.x = ±0 .5)

0.312 MIN TYP
(7.9 MIN)

0.385 ±0.020
(9.8 ±0.5)

0.150 MAX
(3.8 MAX)

0.060 (1.5)

Parameter Frequency Units Min. Max.

Insertion Loss 0.4-400 MHz dB - 0.75
Isolation 0.4-400 MHz dB 25 ­Amplitude Balance 0.4-400 MHz dB - 0.15
Phase Balance 0.4-400 MHz - - 1°
VSWR 0.4-400 MHz - - 1.5

1. All specifications apply with a 50-Ohm source and load impedance.

Specifications subject to change without notice.

 North America: Tel. [phone], Fax [phone]
 Asia/Pacific: Tel.[phone], Fax [phone]
 Europe: Tel. [phone], Fax+ 44 (1 34 4) 30 0 020

V 2.0

1

Visit www.macom . com for ad di tional data sheets and pr o d uct i nf orm ation.