M A COM MLS9108-00766 Datasheet
Surface Mount Frequency Synthesizer MLS9108-00766
g
g
g
g
g
g
g
MLS9108-00766
Surface Mount Frequency Synthesizer
CDMA 754 - 779 MHz
Features
• Integrated VCO/PLL
• Miniature SMT Package
• Low Phase Noise
• +5V Operation
12 Lead Package
M/ A- COM LTD
PART NO.
DATE CODE
DETAIL A
781112 10 9
12.0
Description
The MLS9108-00766 synthesizer design integrates a high performance buffered VCO, PLL circuit and discrete loop filter in a
surface mount package. The SMT packaging provides electrical
IDENT
shielding, easy PCB assembly and repeatable performance. The
synthesizer is designed for use in CDMA base stations and is
optimised for coverage of the cellular Rx band with 70 MHz IF,
30 kHz step size and low phase noise.
M/A-COM synthesizers are manufactured in an ISO 9001 certified facility, incorporating surface mount assembly and automated
electrical testing. This ensures consistent electrical performance
and quality over volume production quantities.
2.0
TYP.in 5 POSITIONS
13.2
Electrical Specifications1, TA = +25°C, VCC = +5V, ∆F = 30 kHz, FR = 15 MHz
Parameter Test Conditions Units Min. Typ. Max.
Frequency Ran
e (F
RF Output Power (P
Harmonic Output — dBc — -18 -15
Spurious Output
Phase Noise
rated Phase Noise 300 Hz to 3 kHz bandwidth mrad rms — 12 —
Inte
4
Frequency Switchin
VCO Supply Current (I
PLL Supply Current (I
VCO Supply Volta
PLL Supply Volta
Step Size (∆F)
7
Reference Frequency (F
1. All specification limits are indicated values and appl y over F
for 50 Ω load impedance.
2. Programming control is 3 wire serial CMOS or TTL levels, in accordance with National Semiconductor LMX 1511.
3. Output power window includes variation over operating temperature
range (T
4. See plot for typical phase noise at other f requency offsets.
) -40°C to +85°C and output frequency range (F
OP
2
OUT
OUT
)
)
Over T
Over T
OP
OP
3
Phase comparison frequency (F
Reference breakthrou
h (F
OUT
OUT
± FR)
± ∆F)
MHz 754 — 779
dBm -1.0 — +5.0
dBc — -85 -70
dBc — -90 —
SSB at 1 kHz offset from carrier dBc/Hz — -80 -73
SSB at 10 kHz offset from carrier dBc/Hz — -107 -102
SSB at 100 kHz offset from carrier dBc/Hz — -127 -121
SSB at 900 kHz offset from carrier dBc/Hz — -145 —
5,6
Time
CC1
)—mA—812
CC2
e (V
CC1
e (V
CC2
Over F
, measured to within ± 500 Hz ms — 30 —
OUT
)— mA—1923
) Recommended operating limit V +4.75 — +5.25
) Recommended operating limit V +4.75 — +5.25
Recommended operating limit kHz — 30 —
8
)
R
0.5 to 2.0 Vpp sine wave into a.c. coupled
CMOS. Recommended operatin
and
OUT
limit
5. See plot for typical full band switching time measured to within
other offsets from final frequency.
6. Integral PLL lock monitor output, TTL high locked, TTL low unlocked.
7. Device designed for loop bandwidth of 200 Hz.
OUT
).
8. Reference frequency i nput impedance 10 kΩ min.
MHz 3 — 20
64321
5
6.0 MAX
0.2
0.6
0.8
1.0
DETAIL A
(unless otherwise stated)
14.6
V2.00
www.macom.com
M/A-COM Division of AMP Incorporated ■ North America: Tel. (800) 366-2266, Fax (800) 618-8883 ■ Asia/Pacific: Tel.+85 2 2111 8088,
Fax +85 2 2111 8087
AMP and Connecting at a Higher Level are trademark s.
Specifications subject to change without notice.
■
Europe: Tel. +44 (1344) 869 595, Fax+ 44 (1344) 300 020
Surface Mount Frequency Synthesizer MLS9108-00766
g
g
g
g
g
Functional Configuration
Lead Function Lead Function
1 Ground 7 Ground
2 Clock Input 8 Reference
Frequency Input
3V
(VCO) 9 V
CC1
4 PLL Lock Monitor
10 Data Input
CC2
(PLL)
Output
5 RF Output 11 Strobe/Enable Input
6 Ground 12 Ground
Environmental Specifications
Devices are designed to function over the operating temperature
range (T
) of -40°C to +85°C and after exposure to the shock,
OP
vibration, thermal shock and moisture conditions typically encountered in base station and other infrastructure environments.
Typical Performance
Phase Noise
-40
-60
-80
-100
-120
-140
PHASE NOISE (dBc/Hz)
-160
10 100 1k 10k 100k 1M 10M
FREQUENCY OFFSET FROM CARRIER (Hz)
Absolute Maximum Ratings
1, 2
Parameter Absolute Maximum
VCO Supply Volta
PLL Supply Volta
e (V
e (V
Reference Frequency Volta
Data, Clock, Strobe Volta
Stora
e Temperature (T
3
CC2
CC1
)
3
)
+6.5V
+6.5V
e -0.3V to +6.5V
es -0.3V to +6.5V
) -45°C to +125°C
STOR
Solder Assembly Temperature See App Note M2032
1. Exceeding these limits may cause permanent damage.
2. Static sensi tive, observe appropri ate precautions.
3. An external series resistor and bypass capacitor will allow operation at higher supply voltage and will improve power supply decoupling and noise suppres sion.
Ordering Information
Synthesizers are available in either tape and reel or tube packaging. To order devices in tape and reel requires the suffix TR be
added to the part number, i.e. MLS9108-00766TR. Quantity 500
per 13 inch reel, see Application Note M2030.
Full Band Switching Time
450
400
350
300
350
200
TIME (ms)
150
100
50
0
100K 10k 1k 100 100 10
OFFSET FROM FINAL FREQUE NCY (Hz)
Output Power vs Temperature
5.0
4.0
3.0
2.0
1.0
0.0
OUTPUT POWER (dBm)
-1.0
735 745 755 765 775 785 795
FREQUENCY (MHz)
Phase Comparator Spurious
0
-20
-40
-60
-80
SPURIOUS LEVEL (dBc)
-100
-40 -30 -20 -10 0 10 20 30 40
FREQUENCY OFFSET FROM CARRIER(kHz)
www.macom.com
M/A-COM Division of AMP Incorporated ■ North America: Tel. (800) 366-2266, Fax (800) 618-8883 ■ Asia/Pacific: Tel.+85 2 2111 8088,
Fax +85 2 2111 8087
AMP and Connecting at a Higher Level are trademark s.
Specifications subject to change without notice.
■
Europe: Tel. +44 (1344) 869 595, Fax+ 44 (1344) 300 020
+85°C
+25°C
-40°C
Output Power vs Supply Voltage (V
5.0
4.0
3.0
2.0
1.0
0.0
OUTPUT POWER (dBm)
-1.0
735 745 755 765 775 785 795
FREQUENCY (MHz)
Breakthrough Reference Spurious
0
-20
-40
-60
-80
SPURIOUS LEVEL (dBc)
-100
-20 -15 -10 -5 0 5 10 15 20
FREQUENCY OFFSET FROM CARRIER(MHz)
CC1
)
5.25V
5.00V
4.75V
V2.00
Loading...