M A COM MLS9100-00752TR, MLS9100-00752 Datasheet

Surface Mount Frequency Synthesizer MLS9100-00752

M/A-COM Division of AMP Incorporated ■ North America: Tel. [phone], Fax [phone] ■ Asia/Pacific: Tel.[phone],
Fax [phone]

■

Europe: Tel. [phone], Fax[phone]

www.macom.com

AMP and Connecting at a Higher Level are trademark s.

Specifications subject to change without notice.

V3.00

Parameter Test Conditions Units Min. Typ. Max.

Frequency Range (F

OUT

)

2

Over T

OP

MHz 738 — 766

RF Output Power (P

OUT

)

3

Over T

OP

dBm -3.0 — +3.0
Harmonic Output dBc — -18 -15
Spurious Output

Phase comparison fr equency (F

OUT

± ∆F)

dBc — -85 -70

Reference breakthr ough (F

OUT±FR

)dBc—-90—

Phase Noise

4

SSB at 1 kHz offset fr om carrier dBc/Hz — -81 -76
SSB at 10 kHz offset fr om carrier dBc/Hz — -110 -105
SSB at 100 kHz offset fr om carrier dBc/Hz — -130 -125

SSB at 900 kHz offset fr om carrier dBc/Hz — -147 —­Integrated Phase Noise 300 Hz to 3 kHz bandwidth mrad rms — 8 —­Frequency Switching Time

5,6

Over F

OUT

, measured to within ±500 Hz ms — 30 —-

VCO Supply Current (I

CC1

) mA — 17 20

PLL Supply Current (I

CC2

)mA—812

VCO Supply Voltage (V

CC1

) Recommended operating limit V +4.75 — +5.25

PLL Supply Voltage (V

CC2

) Recommended operating limit V +4.75 — +5.25

Step Size (∆F)

7

Recommended operating limit kHz — 30 —
Reference Frequency (F

R

)

8

0.5 to 2.0 Vpp sine wave into a. c. coupled

CMOS. Recommended operating limit

MHz 3 — 20

Features

•

Integrated VCO/PLL

•

Miniature SMT Package

•

Low Phase Noise

•

+5V Operation

Description

The MLS9100-00752 synthesizer design integrates a high perfor­mance buffered VCO, PLL circuit and discrete loop filter in a
surface mount package. The SMT packaging provides electrical
shielding, easy PCB assembly and repeatable performance. The
synthesizer is designed for use in CDMA base stations and is
optimised for coverage of the cellular RX band with 86 MHz IF,
30 kHz step size and low phase noise.

M/A-COM synthesizers are manufactured in an ISO 9001 certi­fied facility, incorporating surface mount assembly and automated
electrical testing. This ensures consistent electrical performance
and quality over volume production quantities.

Electrical Specifications1, TA = +25°C, VCC = +5V, ∆∆F = 30 kHz, FR = 15 MHz

(unless otherwise stated)

12 Lead Package

1. All specification limits ar e indicated values and apply over F

OUT

and

for 50Ω load impedance.

2. Programming control is 3 wire serial CMOS or TTL level s, in accor­dance with National Semiconductor LMX 1511.

3. Output power window includes variation over operating temperature
range (T

OP

) -40°C to +85°C and output frequency range (F

OUT

).

Surface Mount Frequency Synthesizer
CDMA 738 - 766 MHz

MLS9100-00752

4. See plot for typical phase noise at other frequency offsets.

5. See plot for typical f ull band switching time measured to within
other offsets from final frequency.

6. Integral PLL lock monitor output, TTL high locked, TTL low un­locked.

7. Device designed for loop bandwidth of 200Hz.

8. Reference frequency input impedance 10kΩ min.

1.0

13.2

6.0 MAX

12.0

14.6

0.2

2.0

TYP.in 5 POSITIONS

781112 10 9

64321

DATE CODE

PART NO.

M/ A- COM LTD

IDENT

DETAIL A

0.6

0.8

5

DETAIL A

Surface Mount Frequency Synthesizer MLS9100-00752

M/A-COM Division of AMP Incorporated ■ North America: Tel. [phone], Fax [phone] ■ Asia/Pacific: Tel.[phone],
Fax [phone]

■

Europe: Tel. [phone], Fax[phone]

www.macom.com

AMP and Connecting at a Higher Level are trademark s.

Specifications subject to change without notice.

V3.00

0

50

100

150

200

250

300

350

400

450

1

10

100

1K

10K

100K

10

-160

-140

-120

-100

-80

-60

-40

10

10M

1M

100K10K1K

100

-100

-80

-60

-40

-20

0

-20 -15 -10 -5 0 5 10 15 20

-3.0

-2.0

-1.0

0.0

1.0

2.0

3.0

720 730 740 750 760 770 780

4.75 V

5.00 V

5.25 V

-100

-80

-60

-40

-20

0

-40 -30 -20 -10 0 10 20 30 40

-3.0

-2.0

-1.0

0.0

1.0

2.0

3.0

720 730 740 750 760 770 780

+25 °C

-40 °C

+85 °C

Output Power vs Temperature

Reference Breakthrough Spurious

Absolute Maximum Ratings

1,2

Parameter Absolute Maximum

VCO Supply Volta

g

e (V

CC1

)

3

+6.5V

PLL Supply Volta

g

e (V

CC2

)

3

+6.5V

Reference Frequency Volta

g

e -0.3V to +6.5V

Data, Clock, Strobe Volta

g

es -0.3V to +6.5V

Stora

g

e Temperature (T

STOR

) -45°C to +125°C

Solder Assembly Temperature See App Note M2032

1. Exceeding these limits may cause permanent damage.

2. Static sensitive, observe appropriate handling precautions.

3. An external series resistor and bypass capacitor will allow opera­tion at higher supply voltage and will improve power supply decou­pling and noise suppression.

Environmental Specifications

Devices are designed to function over the operating temperature
range (T

OP

) of -40°C to +85°C and after exposure to the shock,
vibration, thermal shock and moisture conditions typically encoun­tered in base station and other infrastructure environments.

Functional Configuration

Lead Function Lead Function

1 Ground 7 Ground
2 Clock Input 8 Reference

Frequency Input

3V

CC1

(VCO) 9 V

CC2

(PLL)

4 PLL Lock

Monitor Output

10 Data Input

5 RF Output 11 Strobe/Enable Input
6 Ground 12 Ground

Phase Comparator Spurious

Typical Performance

Ordering Information

Synthesizers are available in either tape and reel or tube packaging.
To order devices in tape and reel requires the suffix TR to be
added to the part number, i.e. MLS9100-00752TR. Quantity 500
per 13 inch reel, see Application Note M2030.

Full Band Switching Time

Phase Noise

Output Power vs Supply Voltage (Vcc1)