Surface Mount Voltage Controlled Oscillator
EGSM 920 - 960 MHz
Features
●
Miniature Size
●
Surface Mount Package
●
Electrically Shielded
●
Low Phase Noise
●
Highly Linear Tuning
LSM1 Package
4.0
0.8
MLO80100-00940
12.7
IDENT
VT
11.8
VCC
M/A-COM
PART NO.
DATE
RF
11.8
V2.00
12.7
Description
The MLO80100-00940 is a fundamental single ended oscillator
designed for use in cost sensitive wireless and telemetry
applications. The device has been optimised by careful
selection of the bipolar transistor and varactor diode for low
phase noise and high linearity tuning characteristics.
The low profile surface mount package used provides for
electrical shielding, ease of assembly and repeatable
performance. M/A-COM’s surface mount manufacturing
techniques together with automatic assembly and electrical
testing ensure a high degree of electrical and mechanical
repeatability at low cost and in high volume. Manufacturing is
carried out in an ISO 9000 qualified facility.
Electrical Specifications1, T
= +25°C, VCC= +5 V (unless otherwise stated)
A
Parameter Test Conditions Units Min Typ Max
Frequency Range MHz 920 960
Tuning Voltage (VT)
RF Output Power
Supply Voltage (VCC)
2
3
4
920 - 960 MHz dBm -2.0 +2.0
Supply Current (ICC)mA15
Phase Noise
5
SSB at 100 KHz offset from carrier dBc/Hz -128 -125
Tuning Sensitivity 920 - 960 MHz MHz/V 15
Tuning Linearity 920 - 960 MHz Ratio 1.2 1.7
Modulation Bandwidth 3 dB bandwidth MHz 2.0
Harmonic Outputs
6
Frequency Pushing VCC4.75V to 5.25V MHz/V 2.0
Frequency Pulling 1.5:1 VSWR load, all phases MHz 2.0
Frequency Drift MHz/°C 0.06
Tune Input Capacitance pF 50
1. All specifications apply with a 50 ohm load impedance.
2. Tuning voltages shown are the minimum and maximum voltages
required to tune the frequency range including temperature effects
-20°C to +70°C. Devices will oscillate normally with tuning voltages
from 0V to +10V.
3. Output power window includes unit to unit variation, temperature
effects -20°C to +70°C and frequency flatness (typically ±0.5 dB at
anyconstant temperature).
Specifications Subject to Change Without Notice.
4. Devices may be operated at lower supply voltage with reduced performance.
5. For typical phase noise at other offsets see phase noise curve.
6. No non-harmonic spurious visible when measured on a test system
with a dynamic range of 70 dB.
M/A-COM Ltd.
North America: Tel. (800) 366-2266 ■ Asia/Pacific: Tel. +81 (03) 3226-1671 ■ Europe: Tel. +44 (1344) 869 595
Fax (800) 618-8883 Fax +81 (03) 3226-1451 Fax +44 (1344) 300 020
1.6
1.7
DETAIL A.
0.8
1.5
5.5
3
3.2
5.5
8.0
DETAIL A.
4
2
SOLDER RESIST
1
V +0.5 +4.5
V +4.75 +5.00 +5.25
dBc -15
7.15
1
Surface Mount Voltage Controlled Oscillator MLO80100-00940
V2.00
Absolute Maximum Ratings
1
Parameter Absolute Maximum
Tuning Voltage (V
Supply Voltage
) 0 to +15V
T
2
(VCC) +6V
Storage Temperature -45°C to +100°C
Solder Assembly Temperature +230°C for 10 secs
1. Exceeding these limits may cause permanent damage.
2. A series resitor will allow operation at any greater supply voltage.
Used in conjunction with a bypass capacitor this will yield improved
power supply decoupling and noise suppression.
Envir onmental Specification
Devices are designed to operate over the temperature
range of -20°C to +70°C and after exposure to the shock,
vibration, thermal shock and moisture conditions
typically encountered in base station and subscriber
terminal environments.
Functional Configuration
Pad Configuration
1 RF Output
2V
3V
4 N/C or Ground
Case / Lid Ground
Substrate Material FR4.
CC
T
Typical Performance @ +25°C
PHASE NOISE
-40
-60
-80
-100
-120
-140
PHASE NOISE (dBc/Hz)
-160
100 1k 10k 100k 1M 10M
OUTPUT POWER
2.0
1.0
0.0
-1.0
OUTPUT POWER (dBm)
-2.0
910 920 930 940 950 960 970
FREQUENCY OFFSET FROM CARRIER (Hz)
FREQUENCY (MHz)
TUNING CURVE
1000
980
960
940
920
FREQUENCY (MHz)
900
0.0 1.0 2.0 3.0 4.0 5.0
TUNING VOLTAGE (V)
MODULATION SENSITIVITY
20.0
18.0
16.0
(MHz/V)
14.0
MODULATION SENSITIVITY
12.0
0.0 1.0 2.0 3.0 4.0 5.0
TUNING VOLTAGE (V)
2
Specifications Subject to Change Without Notice.
M/A-COM Ltd.
North America: Tel. (800) 366-2266 ■ Asia/Pacific: Tel. +81 (03) 3226-1671 ■ Europe: Tel. +44 (1344) 869 595
Fax (800) 618-8883 Fax +81 (03) 3226-1451 Fax +44 (1344) 300 020