MACOM FM-109, FM-108, FM-107 Datasheet

Features

n Operates Over Full AMPS/PCN PCS/PHS Bands
n Low Conversion Loss
n Two Hermetic Package Options
n Typical Midband VSWR 1.5:1
n High Fundamental and Third Order Suppression

Description

M/A-COM’s FM-107, FM-108 and FMS-109 are broad­band RF frequency doublers. These devices are available in
three hermetic packages and offer excellent frequency
multiplication performance, flat conversion loss and high
spurious signal rejection.

The FM-107, FM-108 and FMS-109 offer affordable
solutions to system applications where frequency
multiplication is required.

Broadband Frequency Doubler,
10 - 4800 MHz Output

FM-107/FM-108/FMS-109

FP-2 (FM-107)

TO-8-1 (FM-108)

SF-1 (FMS-109)

V 3.00

Broadband Frequency Doubler, 10 - 4800 MHz Output

FM-107/FM-108/FMS-109

Specifications subject to change without notice.

n North America: Tel. [phone]
n Asia/Pacific: Tel.[phone], Fax [phone]
n Europe: Tel. [phone], Fax[phone]

Visit www.macom.com for additional data sheets and product information.

V 3.00

2

Pin Configuration (FM-107)

Pin No. Function Pin No. Function

1 GND 5 GND
2 GND 6 GND
3 GND 7 GND
4 RF IN 8 RF OUT

Absolute Maximum Ratings 1

1. Operation of this device above any one of these
parameters may cause permanent damage.

2. Ambient Temperature (TA) = +25°C

Parameter

Absolute Maximum

Max Input Power 2

Total Power 300 mW Max.

Derated to 85°C @ 3.2 mW/°C

Electrical Specifications: TA = 25°C, Input Frequency: 5-2400 MHz,
Output Frequency: 10-4800 MHz, Input Power: +10 dBm

Parameter Test Conditions Frequency Units Min. Typ. Max.

Conversion Loss Input: +10 dBm dB — 11 13

F1 Suppression Input: +10 dBm 5-750 MHz

750-1000 MHz

1000-2400 MHz

dB
dB
dB

30
25
20

40
30
25

—
—
—

F3 Suppression Input: +10 dBm 15-1500 MHz

1500-3000 MHz
3000-7200 MHz

dB
dB
dB

35
25
20

40
35
25

—
—
—

VSWR Input: +10 dBm Ratio — 1.5:1 2.0:1

Loss as Quadrupler Input: +10 dBm dB — 27 —

Pin Configuration (FM-108)

Pin No. Function Pin No. Function

1 RF IN 3 RF OUT
2 N/C 4 GND

Pin Configuration (FMS-109)

Pin No. Function Pin No. Function

1 GND 3 GND
2 RF OUT 4 RF IN