MACOM FL07-0001-G-TR, FL07-0001-G-RTR, FL07-0001-G Datasheet

Low Cost SMT Low Pass Filter DC-1000 MHz FL07-0001-G

FL07-0001-G

Low Cost SMT Low Pass Filter
DC - 1000 MHz

Features

• Small Size and Low Profile

• Industry Standard SOIC-8 SMT Plastic Package

• Superior Repeatability

• Typical Insertion Loss 0.5 dB

• Typical Rejection 20d B

• 2 Watt Power Handling

Description

M/A-COM’s FL07-0001-G is an IC-based monolithic low pass
filter in a low cost SOIC-8 plastic package. This filter is ideally
suited for applications where small size, low cost and low loss are
required.

Typical applications include base station switching networks and
portable phones where size and PCB real estate are at a premium.
Available in tape and reel.

The FL07-0001-G is fabricated using a passive-integrated circuit
process. The process features full-chip passivation for increased
performance and reliability.

SO-8

Ordering Information

Part Number Package

FL07-0001-G SOIC 8-Lead Plastic Package
FL07-0001-G-TR Forward Tape and Reel*
FL07-0001-G-RTR Reverse Tape and Reel*

* If specific reel size is required, consult factory for part num ber
assignment.

Typical Electrical Specifications1, TA = +25°C

Parameter Units Min Typ Max

Insertion Loss: DC-1000MHz dB — 0.5 1.0
VSWR: DC-1000 MHz 1.3:1 1.6:1
Rejection: 1800-3500 MHz

2000-3000 MHz

1. All specifications apply with a 50-Ohm source and load impedance.

M/A-COM Division of AMP Incorporated ■ North America: Tel. [phone], Fax [phone] ■ Asia/Pacific: Tel.[phone],
Fax [phone] ■ Europe: Tel. [phone], Fax[phone]

www.macom.com AMP and Connecting at a Higher Level are trademarks.

Specifications subject to change without notice.

dB
dB

15
20

20
27

S1514A V1.00

Low Cost SMT Low Pass Filter DC-1000 MHz FL07-0001-G

Absolute Maximum Ratings1

Parameter Absolute Maximum

Input Power 2 W CW
Operating Temperature -40°C to +85°C

Storage Temperature -65°C to +150°C

1. Exceeding these limits may cause permanent damage.

Functional Diagram

All unused pins must be RF and DC grounded.
Pins 1 and 4 are thermal ground contacts.

Typical Performance @ +25°C

Insertion Loss vs Frequency

0.0

-5.0

-10.0

-15.0

dB

-20.0

-25.0

-30.0

0.0 500.0 1000.0 1500.0 2000.0 2500.0 3000.0

Frequency (MHz)

VSWR vs Frequency

2.0

1.8

1.6

1.4

1.2

1.0

0.0 500.0 1000.0 1500.0 2000.0 2500.0 3000.0

Frequency (MHz)

M/A-COM Division of AMP Incorporated ■ North America: Tel. [phone], Fax [phone] ■ Asia/Pacific: Tel.[phone],
Fax [phone] ■ Europe: Tel. [phone], Fax[phone]

www.macom.com AMP and Connecting at a Higher Level are trademarks.

Specifications subject to change without notice.

S1514A V1.00