MACOM ETN1-1-13 Datasheet

g

g

g

g

E-Series RF 1:1 Transformer

4.5 - 2000 MHz

ETN1-1-13

Features

• Surface Mount

• 1:1 Impedance Ratio

• Available on Tape & Reel

Description

M/A-COM’s ETN1-1-13 is a 1:1 RF transformer in a low cost,
surface mount package. Ideally suited for high volume applica­tions.

SM-52 Package

Schematic

Electrical Specifications @25°C

Parameter Units Nominal Maximum Mean (x)

Frequency Ran
Insertion Loss (f

4.5 - 1000 MHz
1000 - 2000 MHz

Amplit ude Unbalance

4.5 - 1000 MHz
80 - 870 MHz

Phase Unbalance

4.5 - 1000 MHz

80 - 870 MHz

Note: Mean and Sigma calculated from average loss at @ (fU-fL)/2+ f
Please Note that the photograph above indicates typical package only, not actual unit.

www.macom.com AMP and Connectin

e 4.5 - 2000 MHz — — — —

- fU)

L

dB
dB

dB
dB

rees

De

rees

De

L

M/A-COM Division of AMP Incorporated ■ North America: Tel. [phone], Fax [phone] ■ Asia/Pacific: Tel.[phone],
Fax [phone] ■ Europe: Tel. [phone], Fax[phone]

Specifications subject to change without notice.

at a Higher Level are trademarks.

—
—

—
—

—
—

1.0

2.0

1.0

0.7

20

5

0.32
—

—
—

—
—

Sigma (σ)

0.036
—

—
—

—
—

V1.00 S 1455

g

Absolute Maximum Ratings

g

Functional Configuration

Parameter Absolute Maxi mum

RF Power 250 mW

DC Current 30 mA

Operatin

/Storage Temperature -40°C to +85°C

Typical Performance

Insertion Loss

Function Pin No.

Secondary Dot 1

Center Tap -

Secondary 3

Primary 4

Not Connected 2,5

Primary Dot 6

@ +25°C

Ampli t ude Unbalance

Phase Unbalance

M/A-COM Division of AMP Incorporated ■ North America: Tel. [phone], Fax [phone] ■ Asia/Pacific: Tel.[phone],
Fax [phone] ■ Europe: Tel. [phone], Fax[phone]

www.macom.com AMP and Connectin

Specifications subject to change without notice.

V1.00 S 1455

at a Higher Level are trademarks.