E-Series RF 1:4 Transformer — 500 - 2500 MHz ETC1.6-4-2-3
ETC1.6-4-2-3
E-Series RF 1:4 Transmission Line Step-up Transformer
500 - 2500 MHz
Features
• Surface Mount
• 1:4 Impedance Ratio
• CT on Secondary
• Available on Tape & Reel
Description
M/A-COM’s ETC1.6-4-2-3 is a 1:4 RF transmission line step-up
transformer in a low cost, surface mount package. Ideally suited
for high volume cellular and wireless applications. Typical
applications include single to balanced mode conversion and
impedance matching.
SM-22 Package
0.050
(1.27)
0.150
(3.81)
0.100
(2.54)
Schematic
0.030
(0.762)
0.150
(3.81)
0.030
(0.762)
0.030
(0.762)
0.150 MA X
(3.81 MAX)
0.130
(3.30)
0.065
(1.65)
0.055
(1.397)
0.030
(0.762)
0.190
(4.83)
Primary Dot 5
1 Secondary Dot
2 Secondary CT
Primary 4
3 Secondary
Electrical Specifications @25°C
Parameter Units Nominal Maximum Mean (x)
Frequency Range 500 - 2500 MHz — — — —
Insertion Loss (fL - fU)
500 - 750 MHz
750 - 1200 MHz
1200 - 2500 MHz
Note: Mean and Sigma calculated from average loss at @ (fU - fL)/2 + f
Please Note that the photograph above indicates package only, not act ual unit.
M/A-COM Division of AMP Incorporated ■ North America: Tel. (800) 366-2266, Fax (800) 618-8883 ■ Asia/Pacific: Tel.+85 2 2111 8088,
Fax +85 2 2111 8087 ■ Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020
www.macom.com AMP and Connecting at a Higher Level are trademarks.
Specifications subject to change without notice.
dB
dB
dB
L
—
—
—
3.0
1.0
3.0
—
0.22
—
Sigma (σ)
V2.00 S 0206 G
—
0.159
—
E-Series RF 1:4 Transformer — 500 - 2500 MHz ETC1.6-4-2-3
Absolute Maximum Ratings
Parameter Absolute Maximum
RF Power 250 mW
DC Current 30 mA
Operating Temperature -30°C to +85°C
Storage Temperature -30°C to +85°C
Functional Configuration
Function Pin No.
Secondary 3
Secondary CT 2
Secondary Dot 1
Primary Dot 5
Primary 4
Typical Performance Over Extended Bandwidth (30kHz - 3.0GHz)
Insertion Loss
Phase Unbalance
Note: All measurements performed on Hewlett Packard 8753D Net work A nal yzer (201 sam pl e points , linear s cale) in a 50 ohm coplanar
waveguide environment. Tables created using MDS software.
M/A-COM Division of AMP Incorporated ■ North America: Tel. (800) 366-2266, Fax (800) 618-8883 ■ Asia/Pacific: Tel.+85 2 2111 8088,
Fax +85 2 2111 8087 ■ Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020
www.macom.com AMP and Connecting at a Higher Level are trademarks.
Specifications subject to change without notice.
Input Impedance Amplitude Unbalance
V2.00 S 0206 G