MACOM ESMD-169TR, ESMD-169 Datasheet

E-Series Surface Mount Mixer 1 - 3500 MHz
Features
LO Power: +10 dBm
Up to +5 dBm RF
Surface Mount
Specifications @ 25°C
Frequency Range
RF 1 - 3500 MHz LO 1 - 3500 MHz IF 5 - 1500 MHz
Conversion Loss (dB) Typical Maximum
5 - 1000 MHz 5.9 7.0 5 - 3000 MHz 7.1 10.0 1 - 3500 MHz 7.5 12.5
Isolation (dB)
LO to RF Typical Minimum 5 - 1000 MHz 38 30 1 - 3500 MHz 32 15 LO to IF 5 - 1000 MHz 38 30 1 - 3500 MHz 34 18 RF to IF 10 - 500 MHz 30 20 1 - 3000 MHz 25 15
1 - 3500 MHz 22 15 Midband VSWR 2.0 : 1 Typical Two Tone Third Order Input Intercept
Two Tone Intermodulation Ratio ( -10 dBm I/P, each tone & 60 MHz IF)
55 dBc @ 10 MHz
55 dBc @ 500 MHz
56 dBc @ 3000 MHz
Operating Characteristics
Impedance 50 Ohms Nominal RF input for 1dB Compression + 5 dBm
Ordering Information
Part No. Packaging
ESMD-169 Tube ESMD-169TR Forward Tape & Reel
ESMD-169
SM-2
Dimensions in ( ) are in mm.
Unless Otherwise Noted: .x = ±0.04 (1.00)
.xx = ±0.02 (0.50) .xxx = ±0.010 (0.250)
Pin Configuration
Function Pin No.
LO 2 RF 1
IF 3
Ground 4,5
Absolute Maximum Ratings
Parameter Absolute Maximum
RF Power 50 mW Peak IF Current 40 mA Storage Temperature -55°C to 100°C Operating Temperature -55°C to 100°C Pin Temperature (10 Seconds) 260°C
S 0802 C
Specifications Subject to Change Without Notice.
M/A-COM, Inc.
North America: Tel. (800) 366-2266 Asia/Pacific: Tel. +81 (03) 3226-1671 Europe: Tel. +44 (1344) 869 595
Fax (800) 618-8883 Fax +81 (03) 3226-1451 Fax +44 (1344) 300 020
1
Loading...