MACOM EKIN2-420DX Datasheet

E-Series I/Q Demodulator — 410 - 430 MHz EKIN2-420DX

EKIN2-420DX

E-Series I/Q Demodulator
410 - 430 MHz

Features

• Excellent Phase and Amplitude Balance

• LO Power +10 dBm Typical

• Surface Mount

Description

M/A-COM’s EKIN2-420DX is a passive, surface mount I/Q
Demodulator. Ideally suited for Direct Demodulation in PMR/
TETRA applications.

SM-92 Package

Electrical Specifications @25°C

Parameter Units Typical Minimum Maximum

Frequency Range LO / RF 410 - 430
I/Q DC - 1

Amplitude Unbalance dB 0.5 — 1.0
Phase Unbalance Degrees 2.0
Isolation LO to RF

LO to I/Q
Conversion Loss dB 6.4 — 8.0
(LO) Carrier Power dBm

Q= -90° for RF>LO

M/A-COM Division of AMP Incorporated ■ North America: Tel. [phone], Fax [phone] ■ Asia/Pacific: Tel.[phone],
Fax [phone] ■ Europe: Tel. [phone], Fax[phone]

www.macom.com AMP and Connecting at a Higher Level are trademarks.

Specifications subject to change without notice.

MHz
MHz

dB
dB

—
—

55
42

+10 ± 1

—
—

— 3.0
40

40

—

V1.00 S 1377 B

—
—

—
—

—

E-Series I/Q Demodulator — 410 - 430 MHz EKIN2-420DX

Absolute Maximum Ratings

Parameter Absolute Maximum

Operating Temperature -10°C to +70°C

Storage Temperature -55°C to +100°C

Impedance 50 Ohms Nominal

RF Power (1dB Compression) 4 dBm Max

Amplitude Unbalance

0.40

0.35

0.30

0.25

0.20

dB

0.15

0.10

0.05

0.00

0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00

Frequency (MHz)

Functional Configuration

Function Pin No.

LO 1
RF 8

I 5

Q 6

External 50 Ohms —

Case Ground 3,4,7

Not Connected —

Phase Unbalance

100.00

95.00

90.00

85.00

80.00

degrees

75.00

70.00

65.00

60.00

0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00

Frequency (MHz)

M/A-COM Division of AMP Incorporated ■ North America: Tel. [phone], Fax [phone] ■ Asia/Pacific: Tel.[phone],
Fax [phone] ■ Europe: Tel. [phone], Fax[phone]

www.macom.com AMP and Connecting at a Higher Level are trademarks.

Specifications subject to change without notice.

V1.00 S 1377 B