MACOM EKIN2-390DX1 Datasheet

Series I/Q Demodulator — 380 - 400 MHz EKIN2-390DX1

EKIN2-390DX1

E-Series I/Q Demodulator
380 - 400 MHz

Features

• Excellent Phase and Amplitude Balance

• LO Power +10 dBm Typical

• Surface Mount

Description

M/A-COM’s EKIN2-390DX1 is a passive, surface mount I/Q
Demodulator. Ideally suited for Direct Demodulation in PMR/
TETRA applications.

SM-92 Package

Note: Non Hermetic Package

Electrical Specifications @25°C

Parameter Units Typical Minimum Maximum

Frequency Range LO / RF 380 - 400
I/Q DC - 1

Amplitude Unbalance dB 0.5 — 1.0
Phase Unbalance Degrees 2.0
Isolation LO to RF

LO to I/Q
Conversion Loss dB 6.4 — 8.0

(LO) Carrier Power dBm

M/A-COM Division of AMP Incorporated ■ North America: Tel. [phone], Fax [phone] ■ Asia/Pacific: Tel.[phone],
Fax [phone] ■ Europe: Tel. [phone], Fax[phone]

www.macom.com AMP and Connecting at a Higher Level are trademarks.

Specifications subject to change without notice.

MHz
MHz

dB
dB

—
—

55
42

+10 ± 1

—
—

— 3.0
40

40

—

V2.00 S 1376 C

—
—

—
—

±1

Series I/Q Demodulator — 380 - 400 MHz EKIN2-390DX1

Absolute Maximum Ratings

Parameter Absolute Maximum

Operating Temperature -10°C to +70°C

Storage Temperature -55°C to +100°C

Impedance 50 Ohms Nominal

RF Power (1dB Compression) 4 dBm Max

Typical Performance @ +25°C

Amplitude Unbalance

0.40

0.38

0.36

dB

0.34

0.32

0.30

0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0

Frequency (MHz)

Functional Configuration

Function Pin No.

LO 1
RF 8

I 5

Q 6

External 50 Ohms —

Case Ground 3,4,7

Not Connected 2

Phase Unbalance

2.5

2.4

2.3

2.2

2.1

2.0

1.9

Degrees

1.8

1.7

1.6

1.5

0.30.40.50.60.70.80.91.0

Frequency (MHz)

M/A-COM Division of AMP Incorporated ■ North America: Tel. [phone], Fax [phone] ■ Asia/Pacific: Tel.[phone],
Fax [phone] ■ Europe: Tel. [phone], Fax[phone]

www.macom.com AMP and Connecting at a Higher Level are trademarks.

Specifications subject to change without notice.

V2.00 S 1376 C