MACOM DS56-0006-TR, DS56-0006-RTR, DS56-0006 Datasheet

DS56-0006
Low Cost Six-Way SMT Power Divider 1700 - 2000 MHz
Features
Superior Repeatability (Lot-to-lot Variation)
Industry Standard SOIC-16 SMT Plastic Package
Typical Isolation 25dB
Typical Insertion Loss 1.0dB
Low Cost
Description
M/A-COM’s DS56-0006 is an IC-based monolithic power splitter/combiner in a low cost SOIC-16 plastic package. This 6­way power divider is ideally suited for applications where PCB real estate is at a premium and standard p ackaging for automated assembly and low cost are critical. Typical applications include base stations, portables, and peripheral devices (PCMCIA cards) for wireless standards such as PCS, PCN, DECT, PHS, and DCS-
1800. Available in Tape and Reel.
The DS56-0006 is fabricated using a passive-integrated circuit process. The process features full-chip passivation for increased performance and reliability.
1. All specifications apply with a 50-Ohm source and load impedance.
Typical Electrical Specifications1, TA = +25°C
SOIC-16
Ordering Information
Part Number Package
DS56-0006 SOIC-16 Lead Plastic Package DS56-0006-TR Forward Tape and Reel DS56-0006-RTR Reverse Tape and Reel
1. If specific reel size is required, consult fact ory for part number assignment.
1 1
Parameter Units Min Typ Max
Insertion Loss above 7.8dB 1700—2000 MHz
1850—1910 MHz Isolation
1700—2000 MHz 1850—1910 MHz
VSWR Input 1700—2000 MHz 1850—1910 MHz Output 1700—2000 MHz 1850—1910 MHz
Amplitude Balance 1700—2000 MHz 1850—1910 MHz
Phase Balance 1700—2000 MHz 1850—1910 MHz
M/A-COM Division of AMP Incorporated North America: Tel. (800) 366-2266, Fax (800) 618-8883 Asia/Pacific: Tel.+85 2 2111 8088, Fax +85 2 2111 8087 Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020
www.macom.com AMP and Connecting at a Higher Level are trademarks.
Specifications subject to change without notice.
dB dB
dB dB
— —
— —
dB dB
°
— —
18 21
— —
— —
— —
— —
1.3
1.0
25 26
1.7 : 1
1.3 : 1
1.3 : 1
1.1 : 1
0.8
1.0
10
8
1.8
1.5
— —
2.0 : 1
1.7 : 1
1.7 : 1
1.3 : 1
1.3
1.3
20 16
V2.00
Absolute Maximum Ratings1
Parameter Absolute Maximum
Input Power2 1 W CW Operating Temperature -40°C to +85°C
Storage Temperature -65°C to +150°C
1. Exceeding these limits may cause permanent damage.
2. With internal load dissipation of 0.125 W Maximum.
Typical Performance @ +25°C
Insertion Loss Amplitude Imbalance
0.40
0.30
0.20
0.10
0.00
-0.10
dB
-0.20
-0.30
-0.40
-0.50
-0.60
1700.00 1750.00 1800.00 1850.00 1900.00 1950.00 2000.00
Isolation
0.00
-5.00
-10.00
-15.00
-20.00
dB
-25.00
-30.00
-35.00
-40.00
1700.00 1750.00 1800.00 1850.00 19 00.00 1950.0 0 2000.00
Input VSWR Output VSWR
Frequency (MHz)
Frequency (MHz)
Functional Diagram
-0.50
-0.55
-0.60
-0.65
-0.70
dB
-0.75
-0.80
-0.85
-0.90
1700.00 1750.00 1800.00 1850.00 1900.00 1950.00 2000.00
Phase Imbalance
0.00
-2.00
-4.00
-6.00
Degrees
-8.00
-10.00
-12.00
1700.00 1750.00 1800.00 1850.00 1900.00 1950.0 0 2000.00
Frequency (MHz)
Frequency (MHz)
2.00
1.80
1.60
1.40
1.20
1.00
0.80
1700.00 1750.00 1800.00 1850.00 1900.00 1950.00 2000.00
www.macom.com AMP and Connecting at a Higher Level are trademarks.
Frequency (MHz)
M/A-COM Division of AMP Incorporated North America: Tel. (800) 366-2266, Fax (800) 618-8883 Asia/Pacific: Tel.+85 2 2111 8088, Fax +85 2 2111 8087 Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020
Specifications subject to change without notice.
0.00
-5.00
-10.00
-15.00
-20.00
-25.00
-30.00
-35.00
-40.00
1700.00 1750.00 1800.00 1850.00 1900.00 1950.00 2000.00
Frequency (MHz)
V2.00
Loading...