MACOM DS56-0002-TR, DS56-0002-RTR, DS56-0002 Datasheet
Six-Way Power Splitter/Com bi ner DS56-0002
g
DS56-0002
Preliminary Specifications
Low Cost Six-Way Power Splitter/Combiner
1700 - 2000 MHz
Features
• Small Size, Low Profile
• Industry Standard SOW-16 SMT Plastic Package
• Superior Repeatability
• Insertion Loss: 1.1 dB Typical
• Isolation: 22 dB Typical
• Low Cost
Description
M/A-COM’s DS56-0002 is an IC-based monolithic power divider
in a low cost SOW-16 -lead plastic package. This 6-way power
divider is ideally suited for applications where small size, low
profile and low cost, without sacrificing performance, are required. Typical applications include base stations, portables and
PCMCIA cards for wireless standards such as DCS-1800, PCN,
PCS, DECT and PHS. Available in tape and reel.
The DS56-0002 is fabricated using a passive-integrated circuit
process. The process features full-chip passivation for increased
performance and reliability.
SOW-16
Pin 16
Orientation
Mark
Pin 1
.3977-.4133
(10.10-10.50)
-A-
.004 (0.10)
0.050(1.27) BSC.
.010(0.25) M C A M B S
(All dimensions per JEDEC No. MS-013-AA, Issue C)
Unless Otherwise Noted: .xxx = 0.010 (.xx = 0.25)
.013-.020 TYP
(0.33-0.51)
16-Lead SOP outline dimensions
Wide body (.300)
Dimensions in ( ) are in mm.
Ordering Information
-B-
.0926-.1043
(7.40-7.60)
0-8
-C-
.0040-.0118
(0.10-0.30)
.xx = 0.02 (.x = 0.5)
.394-.419
(10.00-10.65)
.010(0.25) M B M
.010-.029 x
45 Chamfer
(0.25-0.75)
.016-.050
(0.40-1.27)
.0091-.0125
(0.23-0.32)
Part Number Package
DS56-0002
DS56-0002-TR
DS56-0002-RTR
1. If specific reel size is required, consult factory for part number
assignment.
SOW 16-Lead Plastic Packa
Forward Tape and Reel
Reverse Tape and Reel
1
1
Typical Electrical Specifications1, TA= +25ºC
Parameters Units Min. Typ. Max.
Insertion Loss dB — 1.2 1.5
Isolation dB 18 22 —
VSWR — — 1.4:1 1.8:1
Amplitude Balance dB — 0.5 1.0
Phase Balance ° — 8° 15°
1. All specifications apply with a 50-ohm source and load impedance.
M/A-COM Division of AMP Incorporated ■ North America: Tel. (800) 366-2266, Fax (800) 618-8883 ■ Asia/Pacific: Tel.+85 2 2111 8088, Fax +85 2 2111 8087
Europe: Tel. +44 (1344) 869 595, Fax+ 44 (1344) 300 020
■
e
V1.B
www.macom.com
AMP and Connecting at a Higher Level are trademark s.
The Preliminary Specifications Data Sheet cont ains typical electrical specif ications which may change prior to final introduction.
Six-Way Power Splitter/Com bi ner DS56-0002
Absolute Maximum Ratings
1
Parameter Absolut e Maximum
Input Power
2
Operating Temperature
Storage Temperature
1W CW
-40°C to +85°C
-65°C to 150°C
1. Exceeding these limits may cause permanent damage.
2. With internal load dissipati on of 0.125 W maximum.
Recommended PCB Configuration
(Dimensions in Inches )
.016 DIA.
PLATED
THRU (21X)
.067
TYP.
mm
.428
.335
RF 3
RF 2
RF 1
RF IN
RF 4
RF 5
RF 6
.030
TYP.
Functional Diagram
GND
1
RF 3 (OUT)
2
GND
3
RF 2 (OUT)
4
GND
5
RF 1 (OUT)
6
GND
7
RF IN
8
3
GND
16
RF 4 (OUT)
15
GND
14
RF 5 (OUT)
13
GND
12
RF 6 (OUT)
11
GND
10
GND
9
3. Pins 1, 3, 5, 7, 9, 10, 12, 14 and 16 must be DC and RF grounded.
.041
.093 TYP.
CIRCUIT MATERIAL: FR-4 .016 THICK
.050 DIA.
PLATED
THRU (3X)
Typical Performance @ +25°C
Insertion Loss vs. Frequency
0.0
-0.5
-1.0
-1.5
INSERTION LOSS (dB)
-2.0
1700 1750 1800 1850 1900 1950 2000
FREQUENCY (MH z)
Isolation vs. Frequency
0
-10
-20
VSWR vs. Frequency
2.0
1.8
1.6
1.4
VSWR
Input
1.2
1.0
1700 1750 1800 1850 1900 1950 2000
FREQUENCY (MH z)
Output
-30
ISOLATION (dB)
-40
1700 1750 1800 1850 1900 1950 2000
FREQUENCY (MH z)
M/A-COM Division of AMP Incorporated ■ North America: Tel. (800) 366-2266, Fax (800) 618-8883 ■ Asia/Pacific: Tel.+85 2 2111 8088, Fax +85 2 2111 8087
Europe: Tel. +44 (1344) 869 595, Fax+ 44 (1344) 300 020
www.macom.com
AMP and Connecting at a Higher Level are trademark s.
The Preliminary Specifications Data Sheet cont ains typical electrical specif ications which may change prior to final introduction.
V1.B
■
Loading...