MACOM DS54-0002-TR, DS54-0002-RTR, DS54-0002 Datasheet

Low Cost Four-Way SMT Power Split­ter/Combiner 1700-2000 MHz

Features

• Small Size and Low Profile

• Industry Standard SOW-16 SMT Plastic Package

• Excellent Repeatability (Lot-to-Lot Variation)

• Typical Isolation: 17 dB

• Typical Amplitude Balance: 0.7dB

• Low Cost

• Typical Insertion Loss: 1.5dB

Description

M/A-COM’s DS54-0002 is an IC-based monolithic power splitter/
combiner in a low cost SOW-16 plastic package. This device is
ideally suited for applications where PCB real estate is at a premium
and standard packaging for automated assembly and low cost are
critical. Typical applications include infrastructure, portables and
peripheral devices (PCMCIA cards) for wireless standards such as
GSM, AMPS, CDPD, RAM and ARDIS. Available in tape and
reel.

The DS54-0002 is fabricated using a passive-integrated circuit
process. The process features full-chip passivation for increased
performance and reliability.

DS54-0002

SOW16

Ordering Information

Part Number Package

DS54-0002 SOW-16 Lead Plastic Package
DS54-0002-TR Forward Tape and Reel
DS54-0002-RTR Reverse Tape and Reel

1. If specific reel size is required, consult factory for part number
assignment.

1
1

Typical Electrical Specifications1, TA = +25°C

Parameter Units Typ Min Max

Insertion Loss Above 6.0dB dB 1.2 — 1.5
Isolation 1700-1800MHz

1801-2000MHz
VSWR Input — — — 1.7:1

VSWR Output 1700-2000MHz

Amplitude Balance dB — — 0.7
Phase Balance ° — — 7

1. All specifications apply with a 50-Ohm source and load impedance.

M/A-COM n North America: Tel. [phone], Fax [phone] n Asia/Pacific: Tel.[phone], Fax [phone] n
Europe: Tel. [phone], Fax[phone]

www.macom.com Specifications subject to change without notice.

dB
dB

—

—
—

—

18
17

—

1.5:1

S 1563C VER 3

—
—

Absolute Maximum Ratings1

Parameter Absolute Maximum

Input Power² 1 W CW
Operating Temperature -40°C to +85°C
Storage Temperature -65°C to +150°C

1. Exceeding these limits may cause permanent damage.

2. With Internal load dissipation of 0.125 W maximum.

Recommended PCB Configuration

(Dimensions in Inches)

Functional Diagram ³

M/A-COM n North America: Tel. [phone], Fax [phone] n Asia/Pacific: Tel.[phone], Fax [phone] n
Europe: Tel. [phone], Fax[phone]

www.macom.com Specifications subject to change without notice.

S 1563C VER 3